TSC TTP-244ME Pro Bedienungsanleitung

TTP-244M Pro / TTP-342M Pro

TTP-244ME Pro / TTP-342ME Pro

USER’S

MANUAL

THERMAL TRANSFER / DIRECT THERMAL

BAR CODE PRINTER

The copyright in this manual, the software and firmware in the printer described

Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

Information in this document is subject to change without notice and does not

represent a commitment on the part of TSC Auto ID Technology Co. No part of

this manual may be reproduced or transmitted in any form or by any means, for

any purpose other than the purchaser’s personal use, without the expressed

written permission of TSC Auto ID Technology Co.

Agency Compliance and Approvals

CE CLASS A

EN55022:2006+A1:2007

EN50024:1998+A1:2001+A2:2003

EN61000-4-2:2008, EN61000-4-3: 2008, EN61000-4-4: 2004

EN 60950-1:2006+A11:2009 (LVD)

GB9254-2008 (CLASS A)

GB4943-2001

GB17625.1-2003

此为A 级产品，在生活环境中，该产品可能会造成无线电干扰，

在这种情况下，可能需要用户对干扰采取切实可行的措施。

A급기기

(업무용 정보통신기기)

이기기는 업무용으로 전자파 적합등록을 한기기이오니, 판매자 또는 사용자는 이점을

주위하시기 바라며, 만약 잘못 판매 또는 구입하였을 때에는 가정용으로 교환하시기 바랍니다.

CONTENTS

1. PRODUCT INTRODUCTION..............................................................1

2. GETTING STARTED..........................................................................2

2.1 Equipment Checklist........................................................................................ 2

2.2 Printer Parts..................................................................................................... 3

2.3 Buttons and Indicators..................................................................................... 6

3. SET UP ..............................................................................................8

3.1 Setting up the Printer....................................................................................... 8

3.2 Loading the Ribbon.......................................................................................... 9

3.3 Loading the Label.......................................................................................... 13

3.4 Loading Media in Peel-off Mode (Option)...................................................... 16

3.5Loading Media in Cutter Mode (Option)......................................................... 18

4. POWER-ON UTILITIES ...................................................................19

4.1 Self Test Utility............................................................................................... 19

4.2 Gap Sensor Calibration Utility........................................................................ 22

4.3 Printer Initialization ........................................................................................ 23

5. DIAGNOSTIC TOOL.........................................................................24

5.1 Start the Diagnostic Tool................................................................................ 24

5.2 Printer Function.............................................................................................. 25

6. TROUBLESHOOTING......................................................................26

7. MAINTENANCE................................................................................27

REVISE HISTORY................................................................................28

APPENDIX A MENU CONTROL FLOWCHART (OPTION)...................1

1. PRODUCT INTRODUCTION

Thank you very much for purchasing this bar code printer. The attractive printer

delivers superior performance at an economical price. Both powerful and easy-

to-use, this printer is your best choice.

The printer offers both thermal transfer and direct thermal printing at user

selectable speeds: either 1.5, 2.0, 3.0 and 4.0 IPS (Inch Per Second) for 203 DPI

model; 1.0, 1.5 and 2.0 IPS for 300 DPI model. It can accept a wide range of

media, including roll feed, die-cut, and fan-fold labels for both thermal transfer

and direct thermal printing. All of the most frequently used bar code formats are

available. Fonts and bar codes can be printed in any one of the four directions.

This printer provides a choice of five different sizes of alphanumeric fonts. By

using font multiplication, an even greater range of sizes is possible. Smooth fonts

can be down-loaded from the user friendly, Windows labeling software. In

addition, this printer is capable of independently executing BASIC programming

functions, including arithmetic, logical operation, loop, flow-control and file

management, among others. This programming capability provides the greatest

efficiency in label printing.

2. GETTING STARTED

This printer has been specially packaged to withstand damage in the shipping

process. However, for fear that unexpected damage might occur, upon

receiving the bar code printer, carefully inspect the package and the device. In

case of evident damage, contact the carrier directly to specify the nature and

extent of the damage. Please retain the packaging materials in case you need

to reship the printer.

2.1 Equipment Checklist

One bar code printer unit

One ribbon paper core for ribbon rewind spindle

Two ribbon supply/rewind spindle (2 pcs)

One USB interface cable

One power cord

One Windows labeling software/ Windows driver CD disk

One quick start guide

Separately purchased items may also be included. These additional items may

include:

Labels

Ribbons

Stand-alone keyboard

Cutter module

Peel-off module

If any parts are missing, please contact the Customer Service Department of

your purchased reseller or distributor.

2.2 Printer Parts

Front View

1. Printer cover/ Release handle

2. Label dispense opening

3. Liner opening (Option function)

4. MENU button (Option for E series)

5. PAUSE/ SELECT button

6. FEED/ SET button

7. Error indicator

8. On-line indicator

9. LCD display (Option for E series)

10. Power indicator

Interior View

1. Ribbon supply spindle

2. Label roll guard

3. Label supply spindle

4. Ribbon rewind spindle

5. Sensor switch

6. Print head release lever

7. Front panel

8. Printer cover

9. Print head

10. Platen roller

11. Media sensor

12. Adjustable label guide

Rear View

1. Centronics interface (Option for E series)

2. Ethernet interface (Option)

3. USB interface

4. Label insert opening (For use with external labels)

5. RS-232C interface connector

6. SD card socket

7. Power switch

8. Power cord socket

Note: The interface picture here is for reference only. Please refer to the

specification for the interfaces availability.

2.3 Buttons and Indicators

POWER Indicator

The green POWER indicator illuminates when the power switch is turned on.

ON-LINE Indicator

The green ON-LINE indicator illuminates when the printer is ready to print. When

the PAUSE button is pressed, the ON-LINE indicator will be flash.

ERROR Indicator (Error/Paper Empty)

The red ERROR indicator illuminates in the event of a printer error, such as

paper empty, ribbon empty, out of memory, and so forth. For a full list of error

messages, please refer to Section 4.2, Troubleshooting Guide.

MENU Button (Option function for E series)

Provided with a built-in menu, the printer allows the user to directly set printing

parameters or view printer status on the LCD display panel. To enter the Menu

mode, press the MENU button. Press the button over again to proceed form one

menu item to another or to revert to the original Ready status. The menu is

comprised of these major items: Printer Info, File List, Memory Info,

Date/Time, and Printer Setup. Each of said items, in turn, is made up of a

number of sub-items, which can be selected by pressing the SELECT button, or

viewed or set by pressing the SET button. Refer to Appendix for the structure

and operation logic of the menu.

PAUSE/SELECT Button

This button combines two functions: PAUSE if the printer is in the Ready status,

or SELECT if in the Menu mode.(Option function for E series)

The PAUSE button allows the user to hold a print job and then resume the

printing with a second depression of the button. By pressing the PAUSE button:

(1) the printer stops at the completion of printing of the current label, (2) the

PAUSE LED flashes, and (3) the printer holds all data in memory. This allows for

trouble-free replacement of label stock and thermal transfer ribbon. A second

depression of the PAUSE button will restart the printer.

Note: If the PAUSE button is held down for more than 3 seconds, the

printer will be reset and all data of the previous printing job will be

lost.

The SELECT button allows the user select for the sub-item to be processed.

Once the sub-item has been selected, the user can change its setting by

pressing the SET button. (Option function for E series)

FEED/SET Button

As does the PAUSE/SELECT button, this button also has dual functions: FEED

and SET.

Press the FEED button for label to advance to the next print position.

Press the SET button to change parameter settings or view printer status on the

LCD screen. (Option function for series)

Inhaltsverzeichnis

Andere TSC Barcode-Lesegerät Handbücher

TSC

TSC Alpha-4L Series Bedienungsanleitung

TSC

TSC ME240 series Bedienungsanleitung

TSC

TSC TDP-643R Plus series Bedienungsanleitung

TSC

TSC TTP-243 Series Bedienungsanleitung

TSC

TSC TTP-268M Bedienungsanleitung

TSC

TSC TTP-342ME Pro Bedienungsanleitung

TSC

TSC XP-DT425B Series Bedienungsanleitung

TSC

TSC TTP-2410M Bedienungsanleitung

TSC

TSC MX240 Bedienungsanleitung

TSC

TSC TTP-245 Plus Bedienungsanleitung

TSC

TSC TTP-245C series Bedienungsanleitung

TSC

TSC TX200 Series Bedienungsanleitung

TSC

TSC Alpha-30L Series Bedienungsanleitung

TSC

TSC TDP-245 Series Bedienungsanleitung

TSC

TSC MX240P Series Bedienungsanleitung

TSC

TSC Alpha-4L-W Bedienungsanleitung

TSC

TSC DA310 Series Bedienungsanleitung

TSC

TSC TTP 243 Pro Bedienungsanleitung

TSC

TSC 4T520 Series Bedienungsanleitung

TSC

TSC TTP-245HR Bedienungsanleitung

TSC

TSC MX241P Series Bedienungsanleitung

TSC

TSC TTP-225 Series Bedienungsanleitung

TSC

TSC TDP-225 Bedienungsanleitung

TSC

TSC MH261T Series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung