TSC TTP-243 Series Bedienungsanleitung

TTP-243 Series/243E Series/ 342 Series

USER’S

MANUAL

THERMAL TRANSFER / DIRECT THERMAL BAR

CODE PRINTER

CONTENTS

1. PRODUCT INTRODUCTION ..........................................................2

1.1 Compliances..................................................................................................... 2

2. GETTING STARTED.......................................................................3

2.1 Unpacking and Inspection............................................................................ 3

2.2 Equipment Checklist..................................................................................... 3

2.3 Printer Parts ................................................................................................. 4

2.4 External Label Roll Mount ............................................................................ 7

2.5 Buttons and Indicators.................................................................................. 8

3. SET UP............................................................................................9

3.1 Setting Up the Printer................................................................................... 9

3.2 Loading Label and Tag Stock....................................................................... 9

3.3 Self-Peeling Function ................................................................................. 12

3.4 Ribbon Loading Instructions....................................................................... 15

3.5 Install External Label Roll Mount................................................................ 18

3.6 Install Memory Module (Option) ................................................................. 19

3.7 Self Test..................................................................................................... 20

3.8 Dump Mode................................................................................................ 22

4. USING TTP-243 SERIES/243E SERIES/342 SERIES .................23

4.1 Power-on Utilities ....................................................................................... 23

4.1.1 Self Test Utility .................................................................................... 23

4.1.2 Gap Sensor Calibration Utility ............................................................. 23

4.1.3 Printer Initialization.............................................................................. 24

4.2 Troubleshooting Guide............................................................................... 25

1. PRODUCT INTRODUCTION

Thank you very much for purchasing TSC TTP-243 eries/243E series/342 series

bar code printer. The attractive desktop printer delivers superior performance at

an economical price. Both powerful and easy-to-use, this printer is your best

choice among desktop direct thermal and thermal transfer label printers.

Printer offers both thermal transfer and direct thermal printing at selectable

speeds of 1.5, 2.0 and 3.0 inches per second for TTP-243 series/243E series and

1.0, 1.5 and 2.0 inch per second for TTP-342 series. It can accept a wide range

of media, including roll feed, die-cut, and fan-fold labels or tags for both thermal

transfer and direct thermal printing. All of the most frequently used bar code

formats are available. Fonts and bar codes can be printed in any one of four

directions. This printer provides a choice of five different sizes of alphanumeric

fonts. By using font multiplication, an even greater range of sizes is possible.

Smooth fonts can be downloaded from the user-friendly Windows labeling design

software. In addition, This printer is capable of independently executing BASIC

programming functions, including arithmetic, logical operation, loop, flow-control

and file management, among others. This programming capability provides the

greatest efficiency in label printing. The status of printer and error messages may

either be printed out or viewed on a monitor by means of the RS-232 connection.

1.1 Compliances

CE, FCC, TÜV-GS, BSMI, CCC

2. GETTING STARTED

2.1 Unpacking and Inspection

The printer has been specially packaged to withstand damage in the shipping

process. However, for fear that unexpected damage might occur, upon receiving

the bar code printer, carefully inspect the package and the device. In case of

evident damage, contact the carrier directly to specify the nature and extent of

the damage. Please retain the packaging materials in case you need to reship

the printer.

2.2 Equipment Checklist

 One bar code printer unit

 One sample roll of plain label stock (Not available for 243E series printer)

 One sample roll of wax-resin ribbon (Not available for 243E series printer)

 One paper core for ribbon rewind spindle

 Two ribbon supply/rewind spindle

 One round label supply roll spindle

 One label spindle with two fixing tabs

 One external label roll mount/spindle (Not available for 243E series printer)

 One power supply

 One power cord

 One Centronics interface cable (Not available for 243E series printer)

 One Quick installation guide

 One Windows labeling software/Windows driver CD disk

Separately purchased items may also be included. These additional items may

include:

 Label

 Ribbon

 Memory module

 Cutter (Not available for 243E series printer)

 Peel off module (Not available for 243E series printer)

 Portable LCD keyboard

If any parts are missing, please contact the Customer Service Department of

your purchased reseller or distributor.

2.3 Printer Parts

Figure 1. Top front view

1. Cover Release Button

2. PWR., ON-LINE and ERR. Indicators

3. PAUSE Button

4. FEED Button

5. Label Dispense Opening

6. Backing Paper Opening (for use with self-peeling function)

Figure 2. Interior view

1. Printer Cover (in open position)

2. Label Supply Roll Spindle

3. Fixing Tabs

4. Ribbon Mechanism

5. Ribbon Supply Spindle

6. Ribbon Rewind Spindle

7. Printer Carriage Release Lever

8. Backing Paper Opening

9. Detachable Front Panel

10. PAUSE Button

11. PWR., ON-LINE, ERR. Indicators

12. FEED Button

13. Peel-Off Sensor

14. Memory Module Slot (with cover on)

Figure 3. Rear view

1. Power On/Off Switch

2. Power Supply Connector

3. RS-232C DB-9 Interface Connector

4. Centronics Interface Connector

5. Label Insert Opening (for use with external labels)

2.4 External Label Roll Mount

Figure 4. External label roll mount

2.5 Buttons and Indicators

PWR. (POWER) Indicator

The green PWR. indicator illuminates when the POWER switch is turned on.

ON-LINE Indicator

The green ON-LINE indicator illuminates when the printer is ready to print. When

PAUSE button is pressed, the ON-LINE indicator flashes.

ERR. Indicator (Error/Paper Empty)

The red ERR. indicator illuminates in the event of a printer error, such as memory

error, syntax error, and so forth. For a full list of error messages, please refer to

section 4.2, Troubleshooting Guides.

PAUSE Button

The PAUSE button allows the user to stop a print job and then continue the

printing with a second depression of the button. By pressing the PAUSE button:

(1) the printer stops printing after the printing label, (2) the PAUSE LED flashes,

and (3) the printer will hold all data in memory. This allows for trouble-free

replacement of label stock and thermal transfer ribbon. A second depression of

the PAUSE button will restart the printer.

Note: If the PAUSE button is held down for more than 3 seconds, the

printer will be reset and all data of the previous printing job will be lost.

FEED Button

Press the FEED button to feed the label to the beginning of the next label.

Andere Handbücher für TTP-243 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TSC Barcode-Lesegerät Handbücher

TSC

TSC TTP-244 series Bedienungsanleitung

TSC

TSC MH240 Bedienungsanleitung

TSC

TSC PRINTRONIX TX210 Series Bedienungsanleitung

TSC

TSC PEX-2000 Series Bedienungsanleitung

TSC

TSC TDP-225W Bedienungsanleitung

TSC

TSC 4D200 Series Bedienungsanleitung

TSC

TSC TDP-643R Plus series Bedienungsanleitung

TSC

TSC TTP-243 Pro Series Bedienungsanleitung

TSC

TSC TDP-245 Series Bedienungsanleitung

TSC

TSC TTP-2410M Pro Bedienungsanleitung

TSC

TSC TTP-346M Bedienungsanleitung

TSC

TSC TTP-245 Plus Bedienungsanleitung

TSC

TSC Alpha-4L-W Bedienungsanleitung

TSC

TSC TE200 series Bedienungsanleitung

TSC

TSC Alpha-4L Series Bedienungsanleitung

TSC

TSC MH241 Series Bedienungsanleitung

TSC

TSC MX340P Series Bedienungsanleitung

TSC

TSC TDP-225 Bedienungsanleitung

TSC

TSC TTP-2410M Pro Bedienungsanleitung

TSC

TSC TTP 246M Bedienungsanleitung

TSC

TSC MX240 Bedienungsanleitung

TSC

TSC MH240 Bedienungsanleitung

TSC

TSC 4T520 Series Bedienungsanleitung

TSC

TSC TTP-245C series Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung