TSI Instruments VelociCalc 9555 Montageanleitung

135 Bernice Drive, Bensenville IL 60106-3366

Toll Free (866)736-8347 Phone (815)464-6200

Fax (815)464-8720

www.raecorents.com

Nationwide rental of industrial hygiene and safety instrumentation, from a service that treats you right.

©2014 RAECO Rents LLC, Bensenville IL. All rights reserved.

TSI VelociCalc 9555/9565 Quick Tips for Pressure Testing

For complete documentation, see http://mobibrix.com/0DKVGG

1. Probe Sampling

a. Connect probe to bottom of instrument, and turn

the instrument on

b. To change the readings displayed on screen...

1. Select [Menu] softkey

2. Select Display Setup

3. Use the softkeys to select display values

(Primary sets value to a larger font to make it

more visible to the user)

a. 964 probe – Flow, Temperature, and %rH set to ON

b. 982 Probe – CO, CO2, Temperature and %rh set to ON

c. 985 Probe – VOC and Temperature set to ON

d. 995 Probe – Flow and Temperature set to ON

4. Press [Enter] to save changes.

c. Set up data logging values

1. Select [Menu] softkey

2. Select Data Logging

3. Select Measurements

4. Select values to be logged by instrument

a. ON = Measurement is logged to memory

b. Display = Measurement will be logged if it is displayed on the main screen

c. OFF = Unit will not save data for that value

d. Hold probe to take samples

e. [NEXT TEST] key saves data up to the point it is pressed and begins a new session

135 Bernice Drive, Bensenville IL 60106-3366

Toll Free (866)736-8347 Phone (815)464-6200

Fax (815)464-8720

www.raecorents.com

Nationwide rental of industrial hygiene and safety instrumentation, from a service that treats you right.

©2014 RAECO Rents LLC, Bensenville IL. All rights reserved.

2. Differential Pressure Testing

a. Connect the two lengths of neoprene tubing to the positive and

negative ports at the top of the instrument

b. Place the free end of the positive port tubing in the area being

tested

c. Place the free end of the negative port tubing in the control/ambient zone

1. A positive reading means the variable/sample (+)zone is higher pressure than the

control/ambient (-)

2. A negative reading means the control/ambient zone (-) is higher pressure than the

variable/sample (+)zone

3. Static Pressure Testing

a. Connect one length of neoprene tubing to the positive port at the top of the instrument

b. Keep the negative (-) port open to measure ambient conditions

c. Attach the static pressure tip to the tubing on the positive (+)port

d. Point the static pressure tip directly into airflow to get an accurate reading

1. Positive reading means the pressure in the duct is higher than the measured ambient

conditions

2. Negative reading means the pressure in the duct is lower than the measured ambient

conditions

For complete documentation, see http://mobibrix.com/0DKVGG

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere TSI Instruments Messgerät Handbücher

TSI Instruments

TSI Instruments Quest The Edge Bedienungsanleitung

TSI Instruments

TSI Instruments Aerotrak 9303 Bedienungsanleitung

TSI Instruments

TSI Instruments SidePak AM520 Bedienungsanleitung

TSI Instruments

TSI Instruments BlueSky 8145 Bedienungsanleitung

TSI Instruments

TSI Instruments Q-TRAK XP 7585 Bedienungsanleitung

TSI Instruments

TSI Instruments ALNOR 9880 Bedienungsanleitung

TSI Instruments

TSI Instruments 3080 Series Bedienungsanleitung

TSI Instruments

TSI Instruments QUESTemp 32 Bedienungsanleitung

TSI Instruments

TSI Instruments Alnor RVA801 Bedienungsanleitung

TSI Instruments

TSI Instruments Alnor Airflow AXD610 Bedienungsanleitung

TSI Instruments

TSI Instruments VelociCalc 9600 Series Bedienungsanleitung

TSI Instruments

TSI Instruments VelociCheck 8330 Bedienungsanleitung

TSI Instruments

TSI Instruments IAQ-CALC 7525 Bedienungsanleitung

TSI Instruments

TSI Instruments DustTrak 8540 Bedienungsanleitung

TSI Instruments

TSI Instruments DUSTTRAK 854201-M1 Bedienungsanleitung

TSI Instruments

TSI Instruments 9535A Bedienungsanleitung

TSI Instruments

TSI Instruments 4040 Bedienungsanleitung

TSI Instruments

TSI Instruments EG4 Bedienungsanleitung

TSI Instruments

TSI Instruments Quest Edge 7 Bedienungsanleitung

TSI Instruments

TSI Instruments VelociCalc 9545 Bedienungsanleitung

TSI Instruments

TSI Instruments 4000 Series Leitfaden

TSI Instruments

TSI Instruments CA-CALC 6203 Series Bedienungsanleitung

TSI Instruments

TSI Instruments ALNOR MicroManometer AXD 550 Bedienungsanleitung

TSI Instruments

TSI Instruments ALNOR AXD 530 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung