TV One MOD-32432-DVI1FO Bedienungsanleitung
32 32
x
SOURCES DISPLAYS
ModularMX
V 1.0
User Manual
MOD-32432-DVI • MOD-32432-DVIELR
MOD-32432-DVI1FO • MOD-32432-DPDVI
MOD-32432-DPELR • MOD-32432-DP1FO
1080P
ASKING FOR ASSISTANCE
USA
tvONE
2791 Circleport Drive
Erlanger, KY 41018
Telephone: 859-980-0420
Fax: 859-282-8225
Email: [email protected]
Visit us on the Web: www. tvone.com
Technical Support Hours: 8:00 AM to 6:00 PM Monday - Friday, Eastern Time
EMEA
tvONE
Unit V, Continental Approach, Westwood Industrial Estate
Margate, Kent CT9 4JG, UK
Telephone: +44 (0)1843 873322
Fax: +44 (0)1843 873301
Email: [email protected]
Visit us on the Web: www. tvone.com
Technical Support Hours: 8:00 AM to 5:30 PM Monday - Friday, GMT
For 24 / 7 support, see the back of the product for the support number
Notice
tvONE reserves the right to make changes in the hardware, packaging and any
accompanying documentation without prior written notice.
32x32 ModularMX is a trademark of tvONE,
All trademarks are the property of their respective companies.
© 2014 tvONE, All Rights Reserved
All trademarks are the property of their respective companies
CONTENTS
INTRODUCTION....................................................................................................................1
Features..........................................................................................................................2
Package Includes............................................................................................................2
Pre-ConguredOptions..................................................................................................3
Front Panel Layout.........................................................................................................8
Front Panel Descriptions.................................................................................................9
Back Panel Layout........................................................................................................10
Back Panel Descriptions...............................................................................................11
CONNECTING THE 32x32 ModularMX.............................................................................12
Connections..................................................................................................................12
Wiring Diagram.............................................................................................................12
DisplayPort package options........................................................................................17
OPERATING THE 32x32 ModularMX................................................................................18
Booting Up / Standby Screen........................................................................................18
Displaying the current Routing State............................................................................19
Routing Sources...........................................................................................................20
Locking the Matrix.........................................................................................................22
Using the Cancel button................................................................................................23
Cycling between Information Screens..........................................................................24
Saving the current Routing State..................................................................................25
Recalling a stored Routing State..................................................................................27
Masking Outputs...........................................................................................................29
EDID Management.......................................................................................................31
Saving the Downstream EDID to Local memory....................................................31
Saving the Default EDID to Local memory.............................................................33
RS-232 / IP CONTROL........................................................................................................35
RS-232 Interface...........................................................................................................35
RS-232 Settings............................................................................................................35
ConguringtheIPAddress...........................................................................................36
RS-232 / Telnet Commands..........................................................................................37
EDID Management...............................................................................................37
IPConguration....................................................................................................47
Routing and Masking............................................................................................55
System..................................................................................................................65
Using the Built-in Web server........................................................................................73
Routing..................................................................................................................73
Routing.........................................................................................................73
Preset Names...............................................................................................77
I/O Names....................................................................................................78
+5V...............................................................................................................79
Output Masks...............................................................................................81
CONTENTS
Status....................................................................................................................83
In / Out..........................................................................................................83
System.........................................................................................................84
Manage EDID.......................................................................................................85
Assign...........................................................................................................85
Bank Names.................................................................................................87
Upload / Download.......................................................................................88
Conguration.........................................................................................................89
APPENDIX............................................................................................................................93
Card Removal and Installation......................................................................................93
Firmware Update Procedure.........................................................................................96
RACK MOUNT SAFETY INFORMATION..........................................................................100
SPECIFICATIONS..............................................................................................................101
WARRANTY........................................................................................................................102
LICENSING.........................................................................................................................103
IMPORTANT OPERATING NOTES
READ THESE NOTES BEFORE INSTALLING OR OPERATING
THE 32X32 MODULARMX
• There is no internal scaling in the 32x32 ModularMX. All of the attached monitors
must be able to display the output resolutions of the source devices. For maximum
compatibility it is recommended that only one compatible/common resolution be used
by all of the source devices.
• Routing features can be accessed using the serial control interface or via Telnet.
See page 37 - 74 for more information.
• The 32x32 ModularMX has several The tvONE 32x32 ModularMX provides several
differentpre-conguredpackagestosuittheneedsofyourapplication.
ThisUserManualcoversallavailablecongurations.Seepage3forinformation
on identifying the type of 32x32 ModularMX that was purchased.
1
Congratulations on your purchase of the 32x32 ModularMX. Your complete satisfaction is
very important to us.
tvONE
In the realm of video distribution, certain features are invaluable in a commercial or
broadcastenvironment.Accommodationssuchasabuild-inpowersupplyandatblack
rack-mount enclosures set tvONE apart from our traditional products. Complex distribution
units allow for professional DVI, 3G-SDI, and HDMI signals to be routed and converted
easily and seamlessly, while being backed up by a renowned and dependable technical
supportteam.tvONEinvitesyoutoexplorethetvONEproductlineandhopesthatyound
thesolutionthattsyourneeds.
The tvONE 32x32 ModularMX
The tvONE 32x32 ModularMX provides an all-in-one professional-grade solution to route
up to 32 DVI sources to up to 32 DVI displays with resolutions up to 1920 x 1200. The
modulardesignofthismatrixprovidestheultimateinexibilitybyallowingtheuseofany
combination of DVI, ELR, or 1FO output modules in any of its four output slots. This feature
allows the tvONE 32x32 ModularMX to function as both a Matrix and as an Extender. The
front-panel LCD displays the current routing status and each DVI source is accessible to
any display by using the front-panel push buttons, via the RS-232 interface, or through IP
Control (built-in Web server and Telnet). Hot-swappable dual redundant power supplies
allow these matrixes to be used for applications in demanding applications where enhanced
reliability, ease of servicing and zero down-time are required.
How It Works
Connect up to 32 DVI source devices using DVI cables to the inputs on the tvONE
ModularMX. Connect up to 32 displays via DVI, CAT-5, or Fiber Optic cables depending
on which output modules are utilized. Connect an Ethernet cable from the network to the
RJ-45 connector to use the built-in Web server or Telnet capability to control routing, EDID,
and other functions. Connect an RS-232 cable from a RS-232 control device to control
the matrix via RS-232. Connect the IEC connectors of the included AC power cords to the
matrix and plug the power cords into available electrical outlets. The DVI sources will be
routed as selected.
INTRODUCTION
2
INTRODUCTION
Features
• Supports resolutions up to 1920 x 1200
• Modular inputs and outputs organized into banks of 8 input or output devices
• Advanced EDID management for rapid integration of sources and displays
• RS-232 Serial interface for remote control via a computer or automation control
system
• Front-panel LCD display
• Front-panel push buttons for local switching
• Built-in Web server, Telnet, and UDP control via IP
• Routing states can be stored and recalled at the touch of a button
• Dual redundant hot-swappable power supplies
• Removableandreplaceablefanandlter
• Output masking command
• Standby mode
• Power ON / OFF switch
• Rack-mountable
Package Includes
Seetheinformationbeginningonthenextpagefordetailsontheavailablepre-congured
options.
Ifanyoftheitemsfromthepre-conguredpackagesaremissing,calltvONETechnical
Support between the hours of 8:00 AM and 5:00 PM, Monday through Friday, EDT in the
USA or 8:00 AM to 5:30 PM Monday - Friday, GMT in Europe.
3
INTRODUCTION
Pre-Congured Options
Before reading this User Manual, familiarize yourself with the rear panel of the 32x32
ModularMX.
The 32x32 ModularMX can accommodate up to four input cards and four output
cards. Each card provides eight connectors, providing a total of 32 inputs and outputs.
The32x32ModularMXissoldpre-conguredwithacombinationofinputandoutputcards
bestsuitedfortheneedsofyourapplication.Wewillcovereachcongurationin
the next section. First, we will identify the location of each input and output card on the
matrix.
Matrix Layout
The bottom-four expansion bays of the matrix only accept input cards. The top-four
expansion bays only accept outputcards.Eachexpansionbayonthematrixisidentied
with a letter: A, B, C, and D, from top to bottom (see next page).
The inputs and outputs are numbered on each card, from left-to-right.
Blue LEDs on each card indicate that the card is properly powered.
Refer to page 10 for detailed information on the rear-panel layout.
NOTE: When a card is not installed, it is recommended that a cover
plate be installed over the expansion bay to prevent dust and other
foreign particles from entering the matrix.
Output bays
Cover plate Power indicator
4
INTRODUCTION
Thefollowinglistoutlinestheavailablepre-conguredoptions.BecausethisUserManual
coversinformationonallavailablecongurations,itisimportanttoidentifythetypeof
32x32 ModularMX that you have purchased:
• MOD-32432-DVI
Four input cards. Each card contains eight DVI inputs, providing a total of 32 DVI
inputs.
Four output cards. Each card contains eight DVI outputs, providing a total of 32 DVI
outputs.
Package Includes:
(1) 32x32 ModularMX Frame
(1) DB-9 cable
(2) AC power cords
(4) ModularMX 8 DVI Input Cards
(4) ModularMX 8 DVI Output Cards
(1) Quick-Start guide
Input bays
87
A
B
C
D
Dieses Handbuch passt für folgende Modelle
5
Inhaltsverzeichnis
Andere TV One Matrix-Umschalter Handbücher
TV One
TV One MX-65 Series Bedienungsanleitung
TV One
TV One MX-5288 Bedienungsanleitung
TV One
TV One MX-2522 Bedienungsanleitung
TV One
TV One MX-2522 Bedienungsanleitung
TV One
TV One MOD-32432-DVI Bedienungsanleitung
TV One
TV One MX-8488 Bedienungsanleitung
TV One
TV One MX-6388 Bedienungsanleitung
TV One
TV One MX-6544 Bedienungsanleitung
TV One
TV One MX-2522 Bedienungsanleitung
TV One
TV One 1T-MX-3344 Bedienungsanleitung
