TV One MX-65 Series Bedienungsanleitung

Instruction Manual

MX-65xx Series

Small HDMI 2.0, 4k HDR Matrices

Table of Contents

1.0

Safety precautions

2.0 Introduction 5

3.0 Features 5

4.0 Operation Controls and Functions

Front Panels

Rear Panels

Routing

To route

To Mute video

To Clear a selection

To Save a Preset

To Load a Preset

To Lock the Front Panel

To Unlock the Front Panel

EDID Learning

Execute default EDID

IR Remote Functionality

Routing via IR Remote

Function Keys

IR Functions

5.0

MX-Tools

Choose Matrix Model

Icons

I/O routing Tab

I/O routing

Recall Presets

Save Preset

EDID Management Tab

Learn EDID from Default to Input

Learn EDID from Display to Input

Load EDID File to Input

Auto EDID

Read Button

View EDID

Rename Tab

Rename I/O

Rename Presets

System Tab

Network-DHCP mode

Network-Static mode

‘Save’ Button

‘Read’ Button

System-Factory Reset

Firmware Version

Cloud setting-Association Code

Reset Cloud

Firmware Tab

FW Update from USB

FW Update from NET

6.0 EDID Learning 17

7.0

Specifications

Technical Specifications

Mechanical

Ordering information

8.0 Limited warranty 20

9.0 Regulatory Compliance 22

10.0

Liability statement 22

11.0 Contact Information

tvONE NCSA

tvONE EMEA

4 MX-65xx Series

1.0 SAFETY PRECAUTIONS

Read all instructions before attempting to unpack, install or operate this

equipment, and before connecting the power supply.



•Unpack the equipment carefully and save the original box and

packing material for possible future shipment

•Follow basic safety precautions to reduce the risk of fire, electrical

shock and injury to persons.

•Do not dismantle the housing or modify the module. It may result in

electrical shock or burn.

•Using supplies or parts not meeting the products’ specifications may

cause damage, deterioration or malfunction.

•Refer all servicing to qualified service personnel.

•To prevent fire or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

•Do not put any heavy items on the extension cable in case of

extrusion.

•Do not remove the housing of the device as opening or removing

housing may expose you to dangerous voltage or other hazards.

•Install the device in a place with fine ventilation to avoid damage

caused by overheat.

•Keep the module away from liquids.

•Spillage into the housing may result in fire, electrical shock, or

equipment damage. If an object or liquid falls or spills on to the

housing, unplug the module immediately.

•Do not use liquid or aerosol cleaners to clean this unit. Always

unplug the power to the device before cleaning.

•Unplug the power cord when left unused for a long period of time.

•Information on disposal for scrapped devices: do not burn or mix with

general household waste, please treat them as normal electrical

wastes.

5 MX-65xx Series

2.0 INTRODUCTION

The MX-65xx Matrix Switcher Series is designed to allow the distribution of

HDMI 2.0a (with HDCP) sources to multiple display devices independently or all

at the same time using an intuitive front panel, infrared remote control or our

control software, MX-tools.

The MX-65xx series is the perfect solution for all your installations including

home theaters, classrooms or conference rooms that demand high levels of

performance and superior 4:4:4 4K/60 image fidelity.

The MX-6588 is HDMI 2.0a compliant with full support for 4K2K@60 4:4:4 8bit

and 10bit processing for superior deep color rendition. 3D signals are also

supported. Audio includes 7.1 audio capability including DTS-HD and

Dolby TrueHD.

3.0 FEATURES

•HDMI 2.0a compliant

•4K2K@60 4:4:4 processing with 8bit and 10bit color depth

•HDR for deep color resolution

•HDCP 2.2 compliant

•Save up to 16 Presets

•Control via Front panel buttons, RS-232, TCP/IP, InfraRed and MX-tools

•Supports 7.1 channel digital audio, DTS, Master and Dolby TrueHD

•Auto detect EDID learning and management

•Robust 1RU rack-mountable metal case

6 MX-65xx Series

4.0 OPERATION CONTROLS AND FUNCTIONS

FRONT PANELS

Name

Description

POWER

LED indicator ON when power is applied.

Built-in IR sensor to receive IR signal from IR remote

IR EXT

3.5mm jack for external IR receiver

Inputs

Buttons with LED for routing inputs and Preset recalling and saving

Outputs

Buttons with LED for routing Outputs and Presets recalling and

saving

Mute Press to turn off all video and audio to all outputs

All

Press to select all outputs when routing

Take

Press to execute selected route or recalling a preset

Clear

Press to clear the selected inputs and outputs when routing

Lock

Press to lock all front panel buttons

Preset

Press to enter preset mode for saving or recalling presets

7 MX-65xx Series

REAR PANELS

Routing

Routing can be performed via several control methods, IR remote, Serial and

TCP/IP, MX-tools, and front panel buttons.

To route inputs to outputs via front panel buttons, follow these steps. First, select

an input by pressing and releasing the desired Input, the LED button will

illuminate. Then press and release the desired outputs. Each LED button will

illuminate when selected. Finally, press the ‘TAKE’ Button to execute the desired

routing. Once ‘TAKE’is pressed, all the LEDs will turn off.

Name

Description

Input

HDMI inputs

Output

HDMI outputs

F/W

This USB is for Firmware updates only

Ethernet

Control port for TCP/IP commands

System IR In

IR input for control via Infrared when using an IR extender

RS232

Serial port to control This device via RS232 commands.

DC 12V

Power input

Power Switch

Main power switch

8 MX-65xx Series

Other commands:

To ‘Mute’ video and audio

from a single output

Press ‘MUTE’ then press the

desired outputs, then press

‘TAKE’

Multiple outputs can

be cleared at once in

this way

To Mute video and audio

from all outputs

Press ‘MUTE’ and press ‘ALL’

then press ‘TAKE’

To Clear a selection

Press the ‘CLEAR’ button to

deselect all previously selected

buttons

To Save a Preset

Press ‘PRESET’, then press and

hold any input or output button

until the LED flashes

Use this after all

routing is complete.

The I/O button

chosen becomes the

new preset number

(1-16)

To Load a Preset Press ‘PRESET’, then choose the

desired Preset (1-16) by pressing

the corresponding I/O button.

Then press ‘TAKE’

In preset mode, the

I/O buttons represent

available preset slots.

To Lock the Front Panel

Press ‘LOCK’

All buttons will be

locked (except

‘LOCK’)

To Unlock the Front panel

Press ‘LOCK’

EDID Learning

Press and hold the desired output

button until it flashes, then select

the desired inputs (when pressing

the inputs, the selected output

stops flashing) and Press 'TAKE'.

The illuminated input buttons

darken one after another, then

the selected output starts

flashing, which means the

process is complete.

Execute default EDID

Press and hold 'MUTE' until it

flashes. Then press the desired

inputs (when pressing the inputs,

the 'MUTE' stops flashing). Then

press 'TAKE' and the LED of the

selected inputs darken one after

another and when 'ALL' starts

flashing, it means the process is

complete.

9 MX-65xx Series

IR Remote Functionality

Routing via IR Remote

To route with the Remote control, you must first select the output and then press

the input. Repeat this to make several routes.

IN/OUT Switch

Output Number (1~8) + Input Number (1~8)

Ex: Input 2

To Output 3

1. Press output number key “3” to select Output 3

2. Press input number key “2” to select Input 2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TV One Matrix-Umschalter Handbücher

TV One

TV One 1T-MX-6344 Bedienungsanleitung

TV One

TV One MX-6544 Bedienungsanleitung

TV One

TV One MX-8488 Bedienungsanleitung

TV One

TV One MX-2522 Bedienungsanleitung

TV One

TV One MX-2522 Bedienungsanleitung

TV One

TV One MOD-32432-DVI Bedienungsanleitung

TV One

TV One MX-2522 Bedienungsanleitung

TV One

TV One MX-5288 Bedienungsanleitung

TV One

TV One MX-6388 Bedienungsanleitung

TV One

TV One IM-400 Series Bedienungsanleitung

TV One

TV One MX-6388 Bedienungsanleitung

TV One

TV One 1T-MX-6344 Bedienungsanleitung

TV One

TV One MX-5288 Bedienungsanleitung

TV One

TV One 1T-MX-3344 Bedienungsanleitung

TV One

TV One MX-8488 Bedienungsanleitung

TV One

TV One MOD-32432-DVI1FO Bedienungsanleitung

TV One

TV One MOD-16416-DVI Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Octava

Octava HD4XSTPMX Bedienungsanleitung

Intelix

Intelix FLX-88 Betriebsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Roland

Roland XS-1HD Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte