Twilight PTZPRO27 Bedienungsanleitung

INSTRUCTION MANUAL

Please read this manual throughly before use and keep it handy for future reference

700TV High Speed Dome Camera

User Manual

WARNINGS and CAUTIONS

EXPLANATION OF GRAPHICAL SYMBOLS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNINGS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.

DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

DO NOT INSERT ANY MEALMETALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR OTHERS

OPENINGS ON THE EQUIPMENT.

The lighting ash with arrowhead symbol, within a triangle, is intended to alert the user

to the presence of un insulated dangerous voltage within the product enclosure that

may be of sucient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instruction in the literature

accompanying the product.

CAUTIONS

CE COMPLIANCE STATEMENT

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL

DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION

AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT.

THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HAARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE

USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR

COMPLIANCE COULD VOID THE USER’S AUTHOURITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.

CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A LA NORME NMB-003 DU CANADA.

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS PRODUCT MAY CAUSE RADIO

INTERFERENCE IN WHICH CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

COMPLIANCE STATEMENT

IMPORTANT SAFEGUARDS

Read all of the safety and operating

instructions beforeusing the product.

Keep the temperature from

-50˚C to 50˚C

IP67 (Waterproof )

That avoid ammability material, or oil. Do not avoid the installation

from electrical supplied pole.

If the camera have some problem,

please stop the operating.

Do not attempt to disassemble

the appliance.

Always use the recommended power. Do not pull the cable.

Never touch un-insulated

parts with wet hands.

Do not use the appliance where

there is excessive dust smoke or moisture.

Please install the product on a

completely at oor.

Manual

High Speed Dome

with IP 67 rated outdoor housing is specially unique & creative designed for strong durability & extremely

reliability.

This camera oers perfect prevention of dew condensation and clear image at operating temperature from -50℃~ 50℃.

Especially, this mechanism supports

greatly increase accuracy and decreasing operation noise. With an accuracy position,

it can

precisely maintain preset camera positions even after frequent panning and tilting. Also, it oers

perfect control of

camera mechanism speeds even at high 37x magnication the camera can quickly and accurately capture images from

360°/sec to 0.1°/sec at the slowest creep speed.

Precautions for proper Operation

Do not install the unit a place subject to direct sunlight, excessive moisture, dust or vibrations where ventilation is poor.

* Please use the unit in the range of a guarantee temperature and humidity of operation.

* Please set ID of a camera as the same number as the input channel to DVR or Matrix switcher.

DC12V/AC24V

TABLE OF CONTENTS

- WARNINGS AND CAUTIONS

- IMPORTANT SAFEGUARDS

- TABLE of CONTENTS

- PACAGE CONTENTS

- INSTALLATION & CONFIGURATION

-- Addres switch setting

-- Wall Mount Installation

-- Ceiling Mount Installation

-- Interface Cable Wiring

- DIMENSION

- SPECIFICATION

- OPERATION & PROGRAMMING

-- Menu Tree

-- Check point & Programming

-- System : Information

Reboot

Factory

Event Log

Password

-- Dispaly : OSD Setup

Area Title

Privacy Zone

Image Setup

-- Dome : General

Motion

Home

Preset

Tour

Pattern

Scan

-- Camera : Focus / Zoom

White Balance

Exposure

Advanced Setup

Reset

-- Alarm

PACKAGE CONTENS

1. Dome camera Unit

2. Body (W/O Sunshield)

3. Trimring Bubble Dome

4. Wrench-3mm

5. User’s manual

Option Bracket

The following parts are supplied with the speed dome system.

Wall Bracket Ceiling Bracket

Dome Camera Unit Bubble Dome Ass’y Housing Body (W/O Sunshield) Sunshield (Option) WrenchManual

Precautions

The following steps of installation and connection work should be done by qualied service personal

or system installers and should conform to all local codes.

- Be sure to switch the camera o before installation and connection.

- Do not install the camera beside air outlet of an air conditioner.

STEP 4.

- Remove the airbag

- Open the screw for dome camera unit.

- Take out the dome camera unit from

housing body ass’y

STEP 1. STEP 2.

STEP 3.

- Screw open the bubble

Airbag

INSTALLTION

Each Part Name

1 Pin description

2 Dip switch for protocol and baud rate

3 Address switch

DC Only

①

②

③

Dome Camera Unit Rear View

DC Only

Address Switch Setting

- Before installation, please set the address switch as described in this manual.

(You have to set the “Address switch” as you want before installation.)

Default (0,1)

- Default baud rate is 2400bps. See table B for details.

- See table C for details.

Switch1 Switch 2 Protocols

O O Pelco-D , Pelco-P, etc. Auto detect.

Switch3 Switch 4 Baud Rate (bps)

O O 2400 * default

O On 4800

On O 9600

On On 38400

Switch5 Termination

O Not Terminated (default)

On Terminated

Protocols Setting

- If you are going to use pelco-D, pelco-P protocols to communicate

with the dome system, you do not have to set any switches.

The unit automatically detects these protocols. See table A for details.

DC Only

Termination Free

When the camera is installed, the last cmaera does not necessary for termination process.

- If you set the switch “Termiation ON” for last camera, you can have easy installation.

INSTALLTION

Wall Mount Bracket - Camera Set Assemble

STEP 1.

Connect the dome camera unit to housing body Ass’y.

(Turn the 4ea of each screw to the right)

①Alarm cable connection

②RJ45 jack connection

③Heater terminal connection

STEP 2.

Remove the holder screw.

STEP 3.

When you assemble the dome bubble Ass’y,

Please follow up the picture.

STEP 4.

Connect the dome bubble Ass’y

to the housing body Ass’y.

Wall Mount Installation

①

②

STEP 1. Fix the TP 18 x 30L Screw supplied.

NO Parts Name DESCRIPTION Q’ty

2 Monut Screw TP1 8 x 30L 4

1 Wall Mount Bracket AL Diecasting 1

STEP 2.

Pass the cables through the bottom of the bracket.

STEP 3.

Hang the safety hook against drop on the bracket.

STEP 4.

Put the dome cable into the bracket and x it.

INSTALLTION

Wall Mount Installation

STEP 5.

Fix the camera set by used screw as the picture.

STEP 6.

Assemble the xed screws using the wrench supplied.

STEP 7.

Connect the camera cable to the bracket cable.

Please see the cable connection.

STEP 8.

Close the bracket cover and x it by knob bolt.

Fix the steel cover supplied on the upper of the bracket

using screw CM3x8L.

Ceiling Mount Installation

STEP 1.

Fix the plastic anchors on the ceiling as

this gure and x the ceiling using the

screws supplied.

STEP 2.

Fix the pipe supplied as this gure turning it clockwise.

STEP 3.

Connect the camera and the bracket cable and x it turning the camera set clockwise.

STEP 4.

Assemble the xed screws using the wrench supplied.

INSTALLTION

DIMENSION

Each Part Name - Cable connection

①Interface cable RJ45

Alarm IN

Alarm OUT

GND

Control

Black / White

Black

Orange

Green

Brown / White

Red / White

Orange / Black

Brown

Yellow / Black

Green / White

Blue / White

Alarm 0

Alarm 1

Alarm 2

Alram 3

COM

GND

RS-485 -

RS-485 +

233.0

110.0

300.9

16.0 16.0

261.0 261.0

322.3

211.3

471.6

279.3

471.6

279.3

170.0

277.3

235.0

233.0

TINT

COLOR

BRIGHT

CONT.

VOLUMEUNDER

SCAN

S-VIDEO

POWER

PMC14H

Video

Power

SPECIFICATION & MENU TREE

Camera

Image Sensor

Zoom (Modul Specific)

Min Focus Distance

Scanning System

Frequency

Total Pixels(Effective Pixels)

Effective Pixels

S/N Ratio

Video Output Signal

Minimum Illumination

Day & Night

White Balance

Video Output

Dome

Pan Angle / Speed

Tilt Angle / Speed

Preset Speed

Preset

Guard Tour

Pattern

Communication

Protocol

Auto Scan

Dome ID

Screen Display

General

Certification

Power Source

Operating Temperature

Operating Humidity

Material

Color

Dimension

Weight

360˚ Continuous Rotation, 0.1˚ ~360˚ / sec

-2˚ ~ 182˚ , 0.1˚ ~ 360˚ / sec (According to Zoom Speed)

Max. 400˚ /sec

256 Preset

8 Guard Tour (Preset, Pattern, Auto Scan, Tour Input)

8 Pattern

RS-485 Baud Rate : 2400 (Default) / 4800/9600/38400

Pelco-P, Pelco-D, Standard

8 Auto Scan

1~255 Camera ID

Camera ID, Pan / Tilt Angle, Flip, Zoom

CE, FCC, VCCI, ROHS, IP67

AC24V / DC12V 3A

-50˚C~ 50˚C (-58˚F ~122˚F)

0~90% RH (Non-Condensing)

Polycarbonate Bubble Dome / Aluminum Main Body. Vandal-Proof

Ivory

233 x 235 (W/O Bracket)

Approx. 5.5kg

IF you use Peoco-D or Pelco-P protocol in your controller, you can access the main menu

by programming

(saving or calling) preset 95.

STARTING OSD MENU (NENU/PRESET 95)

SYSTEM

DISPLAY

DOME

CAMERA

ALARM

EXIT

OSD SETUP

AREA TITLES

PRIVACY ZONE

IMAGE SETUP

FOCUS/ZOOM

W-BALANCE

EXPOSURE

ADVANCED

INFO

REBOOT

FACTORY

EVENT LOG

PASSWORD

GENERAL

MOTION

HOME

PRESET

TOUR

PATTERN

SCAN

27X / 37X NTSC 27X / 37X PAL

1/4 inch, Interline Transfer CCD

37x Optical, f=3.4 to 129.5mm (F1.6~F3.9)

27x Optical, f=3.5 to 94.4mm (F1.6~F2.8)

16x Digital Zoom

1,500mm

2:1 Interlace

H: 15.734 KHz / V: 59.94 Hz

1020(H) x 508(V)

976(H) x 494(V)

More than 52dB

CVBS : 1.0Vp-p/75Ω

0.2 Lux/F1.6 (Wide,50 IRE) : Color

0.01 Lux/F1.6 (Wide,50 IRE) : B/W

Auto, Color, B/W(ICR), EXT

Auto, ATW, Indoor, Outdoor, Mercury, Manual

CVBS : 1.0Vp-p / 75Ω

1/4 inch, Interline Transfer CCD

37x Optical, f=3.4 to 129.5mm (F1.6~F3.9)

27x Optical, f=3.5 to 94.4mm (F1.6~F2.8)

16x Digital Zoom

1,500mm

2:1 Interlace

H: 15.625 KHz / V: 50.00 Hz

1020(H) x 596(V)

976(H) x 582(V)

More than 52dB

CVBS : 1.0Vp-p/75Ω

0.2 Lux/F1.6 (Wide,50 IRE) : Color

0.01 Lux/F1.6 (Wide,50 IRE) : B/W

Auto, Color, B/W(ICR), EXT

Auto, ATW, Indoor, Outdoor, Mercury, Manual

CVBS : 1.0Vp-p / 75Ω

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Twilight Sicherheitskamera Handbücher

Twilight

Twilight T-Pro High Resolution LPR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung