TYAN THUNDER K8SRE Bedienungsanleitung

http://www.tyan.com

Thunder K8SRE /// S2891

Version 1.0

part of this manual may be reproduced or translated without prior written

consent from TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in

this manual are property of their respective owners including, but not limited to

the following.

TYAN, Taro and Thunder K8SRE are trademarks of TYAN Computer

Corporation.

AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.

Nvidia and nForce are trademarks of Nvidia Corporation

Microsoft, Windows are trademarks of Microsoft Corporation.

SuSE,is a trademark of SuSE AG.

Linux is a trademark of Linus Torvalds

IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Notice

Information contained in this document is furnished by TYAN Computer

Corporation and has been reviewed for accuracy and reliability prior to printing.

TYAN assumes no liability whatsoever, and disclaims any express or implied

warranty, relating to sale and/or use of TYAN products including liability or

warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications

at any time, without notice. In no event will TYAN be held liable for any direct or

indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this

document.

http://www.tyan.com

Table of Contents

Chapter 1: Introduction

1.1 Congratulations Page 3

1.2 Hardware Specifications Page 3

1.3 Software Specifications Page 5

Chapter 2: Board Installation

2.1 Board Image Page 8

2.2 Block Diagram Page 9

2.3 Board Parts, Jumpers and Connectors Page 10

2.4 Installing the Processor(s) Page 18

2.5 Heatsink Retention Frame Installation Page 19

2.6 Thermal Interface Material Page 20

2.7 Heatsink Installation Procedures Page 21

2.8 Finishing Installing Heatsink Page 23

2.9 Tips on Installing Motherboard in Chassis Page 24

2.10 Installing the Memory Page 25

2.11 Attaching Drive Cables Page 28

2.12 Installing Add-In Cards Page 30

2.13 Connecting External Devices Page 31

2.14 Installing the Power Supply Page 32

2.15 Finishing Up Page 33

Chapter 3: BIOS

3.1 BIOS Setup Utility Page 35

3.2 BIOS Menu Bar Page 36

3.3 BIOS Legend Bar Page 36

3.4 Getting Help Page 36

3.5 BIOS Main Menu Page 37

3.6 BIOS Advanced Menu Page 38

3.7

3.8 BIOS Memory Menu

Security Menu Page 52

Page 53

3.9 BIOS Boot Menu Page 54

3.10

3.11 Power Menu

BIOS Exit Menu Page 56

Page 57

Chapter 4: Diagnostics Page 59

4.1 Beep Codes Page 59

4.2 Flash Utility Page 59

4.3 BIOS Post Code Page 60

Glossary Page 63

Technical Support Page 69

http://www.tyan.com

Chapter 1: Introduction

1.1 - Congratulations

You have purchased one of the most powerful server solutions. The Thunder

K8SRE (S2891) is a high-end server mainboard, based on Nvidia nForceTM

Professional 2200 Media and Communications Processor (MCP) and AMD

8131 PCI-X HyperTransport™ Tunnel.

Designed to support up to two AMD Opteron™ (200 series) processors and

16GB of DDR400 memory, the S2891 is ideal for CPU, memory, and network

intensive applications required in the HPC and clustering applications.

1.2 - Hardware Specifications

Processors

•Two uPGA 940-pin ZIF sockets

•Two onboard 4-phase VRM

•Supports one or two AMD

OpteronTM processors

•Scalable 32bit and 64bit

computing

•Integrated 144-bit DDR memory

controller (128bit+16bit ECC)

Chipset

•Nvidia nForce Professional 2200

(CrushK8-04 Pro)

•AMD 8131™ PCI-X Tunnel

•Winbond W83627HF Super I/O

•Analog Devices ADT7463

Hardware Monitoring IC

Memory

•128-bit dual channel memory bus

•Total Eight DDR DIMM sockets

(Four per CPU)

•Supports up to 16GB Registered

DDR

•Supports ECC and Chipkill

•Supports DDR400

Integrated Video Controller

•ATI®RAGE XL PCI VGA w/8MB

onboard memory

Integrated LAN Controllers

•One Broadcom®BCM5704 Dual

Port GbE

- Connected to PCI-X bus A

(133MHz)

- Two RJ-45 LAN connectors with

LEDs

- Two front panel LED headers

Integrated Enhanced IDE

Controller

•Two IDE dual-drive ports for up to

four EIDE devices

•Supports for ATA-133 IDE drives

and ATAPI devices

System Management

•Total ten 3-pin fan headers with

PWM support

- Seven fan headers with

tachometer

•One 2-pin chassis intrusion hdr

•Temperature, voltage and fan

monitoring

•Port 80h LED 7-segment display

http://www.tyan.com

Expansion Slots

•One PCI Express x16 slot with

riser support for the following

configuration

- One 16 slot

- Future multiple slot riser support

in development (Check

TYAN.COM for updates)

•One Tyan TAROTM SODIMM

100MHz (PCI-X B)

•One PCI-X 100MHz slot (PCI-X B)

•Total of three usable slots in

pedestal chassis or two slots in

1U rackmount configuration

Integrated SATAII Controllers

•Two integrated dual port SATAII

controllers

•Four SATA connectors support up

to four drives

•Supports 3.0Gb/s per port

•NvRAIDTM v2.0 support

•Supports RAID 0, 1, and 0+1

Integrated I/O

•One floppy connector supports up

to two drives

•One parallel port header and two

serial ports (one connector, one

header)

•Six USB2.0 ports (two rear

connectors & four front panel

headers)

•One 15-pin VGA connector

•PS/2 mouse and keyboard

connectors

Regulatory

•FCC Class B (DoC)

•European Community CE (DoC)

Intelligent Platform

Management Interface Header

•Tyan Server Management

Daughter card (optional)

supports features listed below

via SMDC header

- Baseboard Management

Controller (BMC)

- Tailored for IPMI

- Supports KCS and BT styles

- Flexible Windows or Linux

management solution

- Supports RMCP and SNMP

protocols

- Supports ASF standard and EMP

- 12C serial multi-master controllers

and UARTs

- Built-in IPMB connector

- Remote power on/off and reset

support (IPMI-over-LAN)

BIOS

•Phoenix BIOS on 8Mbit LPC

Flash ROM

•ACPI 2.0 and SRAT support

•PXE via Ethernet

•USB device boot

•SMBIOS 2.3.1, BBS 1.1 compliant

•48-bit LBA support

Form Factor

•Extended ATX Footprint (12”x13”,

304.8x330.2mm)

•SSI 3.0/3.51 (24 + 8 pin) power

connectors

•Serial (one) and VGA (one)

connectors

•Stacked USB 2.0 (two)

connectors

•Stacked PS/2 connectors

•Two RJ-45 LAN connectors with

LEDs

http://www.tyan.com

1.3 - Software Specifications

OS (Operating System) Support

Microsoft Windows 2000

Microsoft Windows XP

Microsoft Windows Server 2003

SUSE Professional 9.x and SLES 9

RHEL3 Update 4

TYAN reserves the right to add support or discontinue support for any OS with

or without notice.

Remember to visit TYAN’s websit at http://www.tyan.com. There you can find

information on all of TYAN’s products with FAQs, manuals, and BIOS updates.

http://www.tyan.com

NOTES:

http://www.tyan.com

Chapter 2: Board Installation

Precautions: The Thunder K8SRE supports SSI, EPS12V type power supplies

(24pin + 8pin) and will not operate with any other types. For proper power

supply installation procedures see page 32.

DO NOT USE ATX 2.x or ATXGES power supplies as they will damage the

board and void your warranty.

How to install our products right… the first time

The first thing you should do is reading this user’s manual. It contains important

information that will make configuration and setup much easier. Here are some

precautions you should take when installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the

antistatic bag. Unplug the power from your computer power supply and

then touch a safely grounded object to release static charge (i.e. power

supply case). For the safest conditions, TYAN recommends wearing a

static safety wrist strap.

(2) Hold the motherboard by its edges and do not touch the bottom of the

board, or flex the board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors,

memory modules, and leads.

(4) Place the motherboard on a grounded antistatic surface or on the

antistatic bag that the board was shipped in.

(5) Inspect the board for damage.

The following pages include details on how to install your motherboard into your

chassis, as well as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN

DAMAGED

http://www.tyan.com

2.1- Board Image

This picture is representative of the latest board revision available at

the time of publishing. The board you receive may or may not look

exactly like the above picture.

The following page includes details on the vital components of this

motherboard.

http://www.tyan.com

2.2 - Block Diagram

Thunder K8SRE (S2891) Block Diagram

http://www.tyan.com

2.3 - Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

 OPEN - Jumper OFF, without jumper cover

 CLOSED – Jumper ON, with jumper cover

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TYAN Hauptplatine Handbücher

TYAN

TYAN TRINITY 400 Bedienungsanleitung

TYAN

TYAN S2505T Montage- und Bedienungsanleitung

TYAN

TYAN S5550 Bedienungsanleitung

TYAN

TYAN Tomcat n3400B S2925 Bedienungs- und Wartungshandbuch

TYAN

TYAN Tiger K8WE S2877 Bedienungsanleitung

TYAN

TYAN THUNDER I840 Bedienungsanleitung

TYAN

TYAN Tiger i7505 Bedienungsanleitung

TYAN

TYAN TIGER I7501X Bedienungsanleitung

TYAN

TYAN TIGER I7501X Bedienungsanleitung

TYAN

TYAN TIGERCUB ATX Bedienungsanleitung

TYAN

TYAN Tempest i5400XT S5396 Bedienungsanleitung

TYAN

TYAN TOMAHAWK BX Bedienungsanleitung

TYAN

TYAN THUNDER X Bedienungsanleitung

TYAN

TYAN S5517 Bedienungsanleitung

TYAN

TYAN S5532 Bedienungsanleitung

TYAN

TYAN Thunder n3600QX Bedienungsanleitung

TYAN

TYAN S7010 Bedienungsanleitung

TYAN

TYAN TOMCAT I875P Bedienungsanleitung

TYAN

TYAN THUNDER K8QW Bedienungsanleitung

TYAN

TYAN TIGER I7501S Bedienungsanleitung

TYAN

TYAN TOLEDO I3000R Bedienungsanleitung

TYAN

TYAN THUNDER 2400 Bedienungsanleitung

TYAN

TYAN Tempest i5100T Bedienungsanleitung

TYAN

TYAN S3115 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung