TYAN TRINITY I7205 Bedienungsanleitung

http://www.TYAN.com

Trinity i7205 ///

S2662

Revision 1.04

may be reproduced or translated without prior written consent from TYAN Computer Corp.

All registered and unregiste red trademarks and company names contained in this manual are

property of their respective owners including, but not limited to the following.

TYAN, Trinity i7205 are trademarks of TYAN Computer Corporation.

Intel, Pentium, and combinations thereof are trademarks of Intel Corporation.

Microsoft and Windows are trademarks of Microsoft Corporation.

Phoenix BIOS is a trademark of Phoenix Technologies.

Winbond is a trademark of Winbond Electronics Corporation.

LSI is a trademark of LSI Logic Corporation.

AnalogDevice and ADMare trademarks of Analog Devices Inc.

Sony/Philips Digital Interface (SPDIF) is a trademark of Sony Corporation and Philips Electronics.

PS/2 is a trademark of International Business Machines Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corporation.

Information contained in this document is furnished by TYAN Computer Corporation and has been

reviewed for accuracy and reliability prior to printing. TYAN assumes no liability and disclaims any

express or implied warranty relating to sale and/or use of TYAN products; we also assume no

including liability or warranties relating to fitness for a particular purpose or merchantability. TYAN

retains the right to make changes to product descriptions and/or specifications at any time without

notice. In no event will TYAN be held liable for any direct or indirect, incidental or consequential

damage, loss of use, loss of data or other malady resulting from errors or inaccuracies of

information contained in this document.

http://www.TYAN.com

Table of Contents –

Before you begin…

Chapter 1: Introduction

1.1 Congratulations

1.2 Hardware Specifications

Chapter 2: Board Installation

2.0 Board Image

2.1 Board Parts, Jumpers and Connectors

2.2 Jumper and Connector Settings

2.3 Enable/Disable On board LAN Jumper

2.4 Fan Connectors

2.5 AUX Audio and CD Audio Connector

2.6 ACPI Wake-up Jumper for USB Port A ~ B

2.7 External SCSI LED Input Jumper

2.8 Clear CMOS Jumper

2.9 ACPI Wake-up Jumper for USB Port C ~ F

2.10 Front Panel Audio Connector

2.11 ChassisIntrusion Connector

2.12 Front Panel USB Header-1

2.13 Front Panel USB Header-2

2.14 OEM Reserved Connectors and Jumpers

2.15 Front Panel Connector

2.16 Mounting the Motherboard

2.17 Installing the Memory

2.18 Installing the Processor and Heatsink

2.19 Installing Add-In Cards

2.20 Connecting External Devices

2.21 Installing the Power Supply

2.22 Attaching IDE and Floppy Drive Cables

2.23 Finishing Up

Chapter 3:BIOS

3.0 BIOS Setup Utility

3.1 BIOS Menu Bar

3.2 BIOS Legend Bar

3.3 BIOS Main Menu

3.4 BIOS Advanced Menu

3.5 BIOS Security Menu

3.6 BIOS Power Menu

3.7 BIOS Boot Menu

3.8 BIOS Exit Menu

Chapter 4: Diagnostics

4.1 Beep Codes

4.2 Flash Utility

Appendix I: Glossary

Technical Support

………………………………….Page 3

………………………………….Page 4

………………………………….Page 6

………………………………….Page 7

………………………………….Page 8

………………………………….Page 9

………………………………..Page 10

………………………………..Page 11

………………………………..Page 12

………………………………..Page 13

………………………………..Page 14

………………………………..Page 15

………………………………..Page 18

………………………………..Page 20

………………………………..Page 21

………………………………..Page 22

………………………………..Page 23

………………………………..Page 24

………………………………..Page 25

………………………………..Page 26

………………………………..Page 27

………………………………..Page 28

………………………………..Page 31

………………………………..Page 32

………………………………..Page 33

………………………………..Page 34

………………………………..Page 35

………………………………..Page 39

http://www.TYAN.com

Before you begin…

Check the box contents!

The retail motherboard package should contain the following:

1x Trinity i7205 S2662 motherboard

1x 34-Pin floppy drive cable

1x LVD SCSI cable (if option SCSI included)

1x Ultra-DMA-100/66/33IDE cable

1x Trinity i7205 S2662 user’s manual

1x TYAN driver CD

1x SCSI driver diskette (if optional SCSI included)

1x I/O shield

1x CPU retention

If any of these items are missing, please contact your vendor/dealer for replacement before

continuing with the installation process.

http://www.TYAN.com

Chapter 1: Introduction

1.1–Congratulations!

You are now the owner of one of the most flexible mPGA478-based motherboards available:

Trinity i7205 S2662. Utilizing the latest chipset technology for Pentium 4 workstation-class

computing, the S2662 strengths are its AGP 8X graphics and USB 2.0/1.1 capabilities.

RemembertovisitTyan’s website at http://www.tyan.com. There you can find information on all of

Tyan’sproducts with FAQs, a complete distributors list, and BIOS setting explanations.

1.2–Hardware Specifications

Processor

• mPGA478 ZIF socket

• Supports Intel Pentium 4 processor

• Supports Intel Celeron mPGA478 processor

• Supports 400/533MHz Front-Side Bus

•Supports Hyper-Threading

•Onboard 3-phase switching VRM 9.0

Chipset

• Intel E7205 chipset

• MCH + ICH4 + FWH

• Winbond W83627HF super I/O chip

• Analog Device ADM1027 system monitor chip

Memory

•Four184-pin 2.5-VoltDDR DIMM sockets

•Supports dual/single memory channels

• Supports up to 4GB unbuffered DDR memory

•Supports ECC/non-ECC DDR200/266 DIMM

ExpansionSlots

• One AGP 8X/4X Pro50 slot

• Five 32-bit 33MHz (5V) PCI slots

•Totalofsixusableslots

Integrated I/O

• Six USB 2.0 and 1.1 compatible ports

(2 rear connectors and 4 front panel headers

viaan optional USB cable)

• Supports one floppy drive with 3 mode

• Two 9-pin serial connectors

• One 25-pin ECP/EPP/SPP parallel connector

•PS/2 mouse and keyboard connectors

IDE

•ICH4 provides two PCI bus master channels

for up to four Enhanced IDE devices

• Supports for UDMA 33/66/100 IDE drives and

ATAPIcompliant devices

Integrated LAN

•Intel 82540EM Gigabit Ethernet 10/100/1000Mbit

(Manufacture loading option with Intel

82551QM10/100Mbit Ethernet)

• PME wakeup support

Integrated SCSI (ManufactureLoadingOption)

• LSI 53C1000R SCSI controller

-Ultra 160 single channel SCSI chip

Integrated Audio

• Intel ICH4 AC’97 compliant audio link

• AD1981A CODEC

•Line-in, Line-out, Mic-in rear jacks

• SPDIF digital output with rear RCA connector

•Frontpanelaudioheader

• One 4-pinCD-ROM audio input header

• One 4-pin Auxiliaryaudio header

System Management

• Analog Device ADM1027 at I2C serial bus

•Total four 3-pin fan headers

•Three fan headers with tachometer monitoring

•One 3-pinchassisintrusionheader

•Temperature, voltage and fan monitoring

General Power Management

• ACPI 2.0b compliant

• PCI Bus Power Management 1.1 compliant

•Memorizepower-state before AC power cut &

restoreupon boot

BIOS

•Phoenix BIOS 6.0 on 4/8Mbit Flash ROM

•SupportsHyper-Threadingtechnology

• SupportsBIOS Boot Specification v1.1 (BBS)

• Supports ACPI 2.0 S1, S3, S4 and S5

•Supports SMBIOSv2.3

• Autoconfiguration of IDE hard disk types

http://www.TYAN.com

Power Management

• ACPI

-Supports ACPI S1, S3, S4 and S5 modes

-S1 is enabled by default, it can be

disabled via BIOS setting in which case

the suspend mode will be S3 instead of

S1.

•Wake-Up from S1 (stand by)

-PCI_PME#, RI#

-PS/2 keyboard, PS/2 mouse

-USBactivity/connect/disconnect

-RTC

-External Modem Ring Indicator (#RI)

-Power Button

•Wake-Up from S3 (suspend to RAM)

-PCI_PME#

-PS/2 keyboard, PS/2 mouse

-USBactivity/connect/disconnect (optional)

-RTC

-Power Button

•Power-On from S4 (suspend to disk) and S5

-RTC

-Power Button

Form Factor

•Standard ATX footprint (12” x 9.6”)

•Six-layer design

• ATX12V (20pin+4pin) power connectors

•Stacked parallel (one), serial (two) connectors

•Stacked USB (two) connectors

•Stacked PS/2 keyboard and mouse connectors

•Stacked audioLine-in, Line-out, and Mic-in

jacks (Amplifier integerated)

• One SPDIF RCA connector (output)

• OneRJ-45 10/100/1000 LAN connector with

LEDs

Regulatory

• FCC Class B (Declaration of Conformity)

•European Community CE (Declaration o f

Conformity)

http://www.TYAN.com

Chapter 2: Board Installation

Installation

You are now ready to install your motherboard. The mounting hole pattern of the S2662 matches

the ATX specifications. Before continuing with installation, confirm that your chassis supports a

standard ATX motherboard.

How to install our products right…. the first time!

The first thing you should do is read this user’s manual. It contains important information that will

make configuration and setup much easier. Here are some prec autions you should take when

installing your motherboard:

(1) Ground yourself properly before removing your motherboard from the antistatic bag.

Unplug the power from your computer power supply and then touch a safely grounded

object to release static charge (i.e. power supply case). For the safest conditions, Tyan

recommends wearing a static safety wrist strap.

(2) Hold the motherboard by its edges. Do not touch the bottom of the board or flex the

board in any way.

(3) Avoid touching the motherboard components, IC chips, connectors, memory modules,

and leads.

(4) Place the motherboard on a grounded antistatic surface or on the antistatic bag that the

board was shipped in.

(5) Inspectthe board for damage.

The following pages include details on how to install your motherboard into your chassis, as well

as installing the processor, memory, disk drives and cables.

NOTE DO NOT APPLY POWER TO THE BOARD IF IT HAS BEEN DAMAGED

http://www.tyan.com

2.0–Board Image

The following is an image of the S2662.

This picture is representative of the latest board revision available at the time of

publishing. The board you receive may or may not look exactly like the above picture.

The following page includes details on the vital components of this motherboard.

http://www.tyan.com

2.1–Board Parts, Jumpers and Connectors

This diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

Jumper OFF without jumper cover

Jumper ON with jumper cover

To indicate where the location of pin-1

http://www.tyan.com

2.2–Jumper and Connector Settings

Jumper /

Connector Function Settings

Enable/Disable Onboard Intel

82540EM GbE NIC Open: Enable (Default)

Close: Disable

J10

Fan Connector Withtachometermonitoring

J11

AUX Audio Connector

J12

CD Audio Input Connector

J13 ACPI Wake-up Jumper

(USBPort-A and USB Port-B)

ClosePin-1 and Pin-2

Rear panel USB devices’ ACPI S1 wake up

ClosePin-2 and Pin-3(Default)

Rear panel USB devices’ ACPI S1/S3/S4 wake up

J16

Fan Connector Withtachometermonitoring

J21

Fan Connector Withtachometermonitoring

J22

Optional SCSI LED Input jumper

J28

ClearCMOS Jumper Open: Normal (Default)

Close: Clear CMOS Mode

J37

Fan Connector Withtachometermonitoring

J39 ACPI Wake-up Jumper

(USBPort-C,USBPort-D, USB

Port-EandUSB Port-F)

ClosePin-1 and Pin-2

Front panel USB devices’ ACPI S1 wake up

ClosePin-2 and Pin-3 (Default)

Front panel USB devic es’ ACPI S1/S3/S4 wake up

J71

Front Panel Audio Connector

J72

Chassis Intrusion Connector

J73

Front Panel USB Header-1

J74

Front Panel Connector

J79

Front Panel USB Header-2

http://www.tyan.com

2.3–Enable/Disable On board LAN Jumper (J8)

OPEN (Default)

Toenable onboardLAN

To disable onboard LAN

2.4–Fan Connectors (J10, J16, J21 and J37)

Use these headers to connect chassis and

processor cooling fans to your motherboard.

Cooling fans can keep the system stable and

reliable for its product life.

Max 850mA fans supported

2.5–AUX Audio connector (J11) and CD Audio connector (J12)

J11 (AUX Audio connector)

Connects to internal audio sources such as TV

tuner, MPEG, or other similar cards

J12 (CD Audio connector)

Connects to a CD-ROM drive via an optional

CD audio cable

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TYAN Hauptplatine Handbücher

TYAN

TYAN THUNDER GC-HE Bedienungsanleitung

TYAN

TYAN TIGER I7501X Bedienungsanleitung

TYAN

TYAN TITAN TURBO AT Bedienungsanleitung

TYAN

TYAN S8212 Bedienungsanleitung

TYAN

TYAN Tiger MPX S2466 Montage- und Bedienungsanleitung

TYAN

TYAN TIGER 200 Bedienungsanleitung

TYAN

TYAN TIGER I7501R Bedienungsanleitung

TYAN

TYAN S1832DL Bedienungsanleitung

TYAN

TYAN S7025 Bedienungsanleitung

TYAN

TYAN TEMPEST II Bedienungsanleitung

TYAN

TYAN TITAN VX Bedienungsanleitung

TYAN

TYAN THUNDER I7500 Bedienungsanleitung

TYAN

TYAN TEMPEST I5000VF Bedienungsanleitung

TYAN

TYAN THUNDER K8SE Bedienungsanleitung

TYAN

TYAN Tempest i5400XT S5396 Bedienungsanleitung

TYAN

TYAN Tempest i5100X Bedienungsanleitung

TYAN

TYAN Thunder n3600M (S2932) Bedienungsanleitung

TYAN

TYAN TOMCAT I875P Bedienungsanleitung

TYAN

TYAN THUNDER K8WE Bedienungsanleitung

TYAN

TYAN THUNDER K7 Montage- und Bedienungsanleitung

TYAN

TYAN TRINITY GC-SL Bedienungsanleitung

TYAN

TYAN S8226 Bedienungsanleitung

TYAN

TYAN TITAN TURBO PLUS ATX Bedienungsanleitung

TYAN

TYAN TOMCAT I845GV Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung