TYAN Tank GT14 B5180 Bedienungsanleitung

Tank™GT14

B5180

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and

software, is protected under international copyright laws, with

contained herein, may be reproduced without written consent

of manufacturer.

Version 2.00

Disclaimer

Information contained in this document is furnished by TYAN

Computer Corporation and has been reviewed for accuracy and

reliability prior to printing. TYAN assumes no liability whatsoever,

and disclaims any express or implied warranty, relating to sale

and/or use of TYAN products including liability or warranties

relating to fitness for a particular purpose or merchantability.

TYAN retains the right to make changes to product descriptions

and/or specifications at any time, without notice. In no event will

TYAN be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady

resulting from errors or inaccuracies of information contained in

this document.

Trademark Recognition

All registered and unregistered trademarks and company

names contained in this manual are property of their respective

owners including, but not limited to the following.

TYAN and Tank™GT14 B5180 are trademarks of TYAN

Computer Corporation.

Intel, Pentium 4, Pentium D, Core 2 Duo, and combinations

thereof are trademarks of Intel Corporation.

Award, Phoenix, PhoenixBIOS, and combinations thereof are

trademarks of Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe

Corporation.

Federal Communication Commission (FCC)

Notice for the USA Compliance Information

Statement (Declaration of Conformity Procedure) DoC

FCC Part 15: This device complies with part 15 of the

FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try one or

more of the following measures:

– Reorient or relocate the receiving antenna.

–

Increase the separation between the equipment and the

receiver.

–

Plug the equipment into an outlet on a circuit different from

that of the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class B limits for radio

interference as specified in the Canadian Department of

Communications Radio Interference Regulations. (Cet appareil

est conforme aux norms de Classe B d’interference radio tel que

specifie par le Ministere Canadien des Communications dans

les reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not

puncture, mutilate, or dispose of battery in fire. Danger of

explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by manufacturer.

Dispose of used battery according to manufacturer instructions

and in accordance with your local regulations.

About this Manual

This manual provides you with instructions on installing your

Tank™GT14. This Manual is intended for experienced users

and integrators with hardware knowledge of personal

computers.

This manual consists of the following parts:

Chapter1: Provides an introduction to the GT14

B5180 barebones, packing list, describes

the external components, gives a table of

key components, and provides block

diagrams of the system.

Chapter2: Covers procedures on installing the CPU,

memory modules, a PCI Express card and

hard drives. Rack mounting information is

also provided in this chapter.

Chapter3: Covers removal and replacement

procedures for pre-installed components.

Chapter 4: Covers the contents of system BIOS.

Appendix I: Listing the cable connection tables for

reference of system setup.

Appendix II: Covers procedures on installing the SMDC

Card.

Appendix III: Covers procedures on installing M2061

PCI-X Riser Card.

Appendix IV: Covers instruction on detaching the LAN

cable.

Appendix V: Covers instruction on assembling the fan

holders.

iii

SAFETY INFORMATION

Before installing and using the Tank™GT14, take note of the

following precautions:

–

Read all instructions carefully.

– Do not place the unit on an unstable surface, cart, or

stand.

–

Do not block the slots and opening on the unit, which are

provided for ventilation.

–

Only use the power source indicated on the marking

label. If you are not sure, contact the power company.

–

The unit uses a three-wire ground cable, which is

equipped with a third pin to ground the unit and prevent

electric shock. Do not defeat the purpose of this pin. If you

outlet does not support this kind of plug, contact your

electrician to replace your obsolete outlet.

–

Do not place anything on the power cord. Place the power

cord where it will not be in the way of foot traffic.

–Follow all warnings and cautions in this manual and on

the unit case.

–

Do not push objects in the ventilation slots as they may

touch high voltage components and result in shock and

damage to the components.

–When replacing parts, ensure that you use parts specified

by the manufacturer.

–When service or repairs have been done, perform routine

safety checks to verify that the system is operating

correctly.

–Avoid using the system near water, in direct sunlight, or

near a heating device.

–Cover the unit when not in use.

WARNING

- Energized and Moving Parts Inside.

- Disconnect Power to the Equipment Before Removing

the Enclosure.

- Replace and Secure the Enclosure Before

Re-energizing the Equipment.

Table of Contents

Chapter 1: Overview

1.1 About the Tank™GT14 B5180…………………….……...…….…………. 1

1.2 Product Models…………………..……………………….………................. 1

1.3 Features……………………………………………………………………… 2

1.4 Unpacking………………………………….……..………............................. 8

1.5 About the Product……….………………………..……................................. 11

1.5.1 System Front View………………………..…………………………. 11

1.5.2 System Rear View………………………………................................ 11

1.5.3 LED Definition……………………………………………………..... 13

1.5.4 Internal View……………………………………………………….... 14

1.5.5 Motherboard Layout………………………......................................... 16

1.5.6 Jumpers & Connectors…………………………………..................... 17

1.5.7 System Block Diagram……................................................................. 23

1.5.8 FRU List....……………...……............................................................. 24

Chapter 2: Setting Up

2.0.1 Before You Begin………..…………………………........................... 27

2.0.2 Work Area……………………………………………………............ 27

2.0.3 Tools …………….……………………............................................... 27

2.0.4 Precautions ………………………………………………….............. 28

2.1 Installing Motherboard Components...………………..…….......................... 29

2.1.1 Removing the Chassis Cover………………………………............... 29

2.1.2 Installing the CPU and Heatsink…………………………………….. 30

2.1.3 Installing the Memory……………..………………………………… 32

2.1.4 Installing the PCI-E Card……………................................................. 33

2.1.5 Installing the Hard Drive…………………………………………….. 35

2.2 Rack Mounting………………………………………………………………. 42

2.2.1 Installing the Server in a Rack (with Rail Kit A)……………………. 43

2.2.2 Installing the Server in an Open Rack (with Rail Kit B)…………….. 48

2.2.3 Rack Mount Instructions…………………………………………….. 51

2.3 LCD Software Setup...………………………………………………………. 52

2.3.1 Configuring the System………………..……….……………………. 52

2.3.2 M1000 Driver Installation for Windows……….……………………. 52

2.3.3 M1000 Driver Installation for Linux…..……….……………………. 52

2.4 LCD Console………..………………………………………………………. 53

2.4.1 Key Definition……………………………………………………….. 53

2.4.2 DOS Mode and Windows Mode…………………………………….. 54

2.4.3 Linux Mode………………………………………………………….. 57

Chapter 3: Replacing Pre-Installed Components

3.1 Introduction………………………………………………………………….. 59

3.1.1 Work Area…………………………………………………................ 59

3.1.2 Tools………………………………………….………........................ 59

3.1.3 Precautions……………………………………………………........... 60

3.2 Disassembly Flowchart…………………………..………………………….. 61

3.3 Removing the Top Chassis Cover……………………..…….……………..... 62

3.4 Replacing Motherboard Components……………..………………………… 63

3.4.1 Disconnecting All Motherboard Cables………………....................... 63

3.4.2 Removing the Motherboard………………………………………….. 64

3.5 Replacing the LCD Module and LED Board….……...................................... 65

3.5.1 M1017 LED Board Features………………………............................ 68

3.5.2 M1007 LED Board Connector Pin Definition………………………. 68

3.6 Replacing the USB Board…………………………………………………… 69

3.6.1 USB Board Features………………..……………………………….. 70

3.6.2 USB Board Connector Pin Header………………..……..………….. 70

3.7 Replacing the Cooling Fans………..……....................................................... 71

3.8 Replacing the Power Supply……..………….................................................. 72

Chapter 4: BIOS Setup

4.1 Main BIOS Setup………………………………………………………...….. 77

4.2 Standard CMOS Features………....……………………………………...….. 79

4.2.1 Phoenix – AwardBIOS CMOS Setup Utility…….………….………. 81

4.3 Advanced BIOS Features……………………………………………………. 82

4.3.1 CPU Features………………………………………………………… 85

4.3.2 Hard Disk Boot Priority……………………………………………... 86

4.4 Advanced Chipset Features.…………………………………………………. 87

4.5 Integrated Peripherals……………………...………………………………... 88

4.5.1 OnChip IDE Device…………………………………………………. 89

4.5.2 Phoenix - AwardBIOS CMOS Setup Utility………………………... 90

4.5.3 Super I/O Device……………..……………………………………… 92

4.6 Power Management Setup…..………………………………………………. 93

4.7 PnP/PCI Configurations……………………….…………….………………. 96

4.8 PC Health Status…………..………………..……………………….............. 97

4.8.1 AutoFAN Control……………...…………………………….............. 99

4.9 Frequency/Voltage Control………...…..……………………………………. 100

4.10 Load Fail-State Default…………………………………………………….. 101

4.11 Load Optimized Default….…………….…………………………………... 101

4.12 Supervisor/User Password Setting………………….……………………… 102

4.13 Exit Selection………………………………………………………………. 103

Appendix I: Cable Connection Tables

Appendix II: Installing the SMDC Card

Appendix III: Installing the M2061 Riser Card

Appendix IV: Detaching LAN cable

Appendix V: Assembling fan holders

Chapter 1: Overview

1.1 About the Tank™ GT14 B5180

Congratulations on your purchase of the TYAN Tank™

GT14 B5180, a highly-optimized rack-mountable

barebone system. The Tank™ GT14 B5180 is

designed to support single Intel® Pentium® 4,

Pentium® D and Core 2 Duo processors and

maximum 4GB memory, providing a rich feature set

and incredible performance. Leveraging advanced

technology from Intel, the Tank™ GT14 B5180 server

system is capable of offering scalable 32 and 64-bit

computing, high-bandwidth memory design, and

lightning-fast PCI-E slot implementation. The Tank™

GT14 B5180 not only empowers your company in

today’s demanding IT environment but also offers a

smooth path for future application usage.

TYAN is also proud to deliver the Tank™ GT14 B5180

in SATAII flavor while supporting up to three (3) hard

drives. The Tank™ GT14 B5180 uses TYAN’s latest

chassis featuring a robust structure and a solid

mechanical enclosure. All of these provide the Tank™

GT14 B5180 the power and flexibility to meet the

needs of nearly any server application.

1.2 Product Models

Model HDD Bays Hot-Swap

Supported

B5180G14S3M Internal, (3)

HDDs No

B5180G14S3M-QT Internal, (3)

HDDs No

Chapter 1: Overview

1.3 Features

Tank GT14 (B5180G14S3M)

Form Factor 1U Rackmount

Chassis Name GT14

Dimension (D x W

x H)

w/ bezel 15.5" x 17.2" x 1.7" (394 x

436x43.6mm); w/o bezel 14.4" x 17.2" x

1.7"(365 x 436 x 43.6mm)

Motherboard S5180G2N-BB

System

Gross Weight 16 kg

Buttons (1) PWR / (1) ID

LEDs (1) PWR / (1) HDD / (2) LAN / (1) ID / (1)

Warning

I/O Ports (2) USB

Front Panel

LCM Yes

Type / QTY

(2) 3.5" + (1) 2.5" / (1) 3.5" + (3) 2.5"

(optional) / (2) 3.5" + (2) 2.5" (optional, w/

o PCI-E support)

Internal Drive

Bay Supported HDD

Interface SATAII

FAN (3) 4cm fans

System Cooling

Configuration Air Duct (1) Air duct

Type EPS12V

Input Range Full-range AC(100-240V)

Frequency 60 Hertz

Power Supply

Output Watts 300 Watts

Supported CPU

Series

Intel Pentium 4, Pentium D and Core 2

Duo processors: CedarMill / Presler /

Conroe

Socket Type / QTY LGA775 / (1)

Processor

System Bus (MHz) 533/800/1066

MCH / ICH Intel Q965 / ICH8

Chipset Super I/O SMSC SCH5027

Supported DIMM

Qty (2) DIMM sockets

DIMM Type / Speed Unbuffered Non-ECC DDR2 /

800/667/533

Capacity Up to 4GB

Memory channel 2-Channel

Memory

Memory voltage 1.5V

PCI-E (1) PCI-E x16 slot

Expansion Slots Pre-install TYAN

Riser Card M2083-RS, PCI-E x16 1U riser card (left)

Port QTY (2)

LAN Controller Intel 82573V

Chapter 1: Overview

Inhaltsverzeichnis

Andere TYAN Server Handbücher

TYAN

TYAN Thunder n3600QE S4980 Bedienungsanleitung

TYAN

TYAN Transport VX50 Bedienungsanleitung

TYAN

TYAN GT90-B7113 Kurzanleitung

TYAN

TYAN GT24 B7016 Bedienungsanleitung

TYAN

TYAN Tank TA26 B5380 Bedienungsanleitung

TYAN

TYAN Transport TA26-B3892 Bedienungsanleitung

TYAN

TYAN Transport GX28 B2881 Bedienungsanleitung

TYAN

TYAN GT24B-B7076 Kurzanleitung

TYAN

TYAN Transport GX18 B3095 Bedienungsanleitung

TYAN

TYAN TN70-B7016 Kurzanleitung

TYAN

TYAN TA77-B7061 Kurzanleitung

TYAN

TYAN TS65A-B8036 Kurzanleitung

TYAN

TYAN Transport GT28 B2935 Bedienungsanleitung

TYAN

TYAN GT24-B7016-LE Kurzanleitung

TYAN

TYAN B8028Y190X2 Kurzanleitung

TYAN

TYAN Transport GT26-B4987 Bedienungsanleitung

TYAN

TYAN GT75-BP012 Kurzanleitung

TYAN

TYAN Tank GT25 B5381 Kurzanleitung

TYAN

TYAN TA77-B7061 Kurzanleitung

TYAN

TYAN GT62B-B7076 Kurzanleitung

TYAN

TYAN GT24-B8236-IL Kurzanleitung

TYAN

TYAN Transport GT24 (B2932) Bedienungsanleitung

TYAN

TYAN FT83-B7119 Kurzanleitung

TYAN

TYAN FT77A-B7059 Kurzanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung