TYAN Transport GX18 B3095 Bedienungsanleitung

Transport GX18

B3095

Service Engineer’s Manual

PREFACE

This publication, including all photographs, illustrations, and software, is protected

material contained herein, may be reproduced without written consent of the manufac-

turer.

Version 1.0

Disclaimer

Information contained in this document is furnished by TYAN Computer Corporation

and has been reviewed for accuracy and reliability prior to printing. TYAN assumes

no liability whatsoever, and disclaims any express or implied warranty, relating to sale

and/or use of TYAN products including liability or warranties relating to ﬁtness for a par-

ticular purpose or merchantability. TYAN retains the right to make changes to product

descriptions and/or speciﬁcations at any time, without notice. In no event will TYAN be

held liable for any

direct or indirect, incidental or consequential damage, loss of use, loss of data or other

malady resulting from errors or inaccuracies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names contained in this man-

ual are property of their respective owners including, but not limited to the following.

TYAN and Transport GX18 B3095 are trademarks of TYAN Computer Corporation.

Intel, Xeon, and combinations thereof are trademarks of Intel Corporation.

AMD, Opteron, Athlon, and combinations thereof are trademarks of AMD Corporation.

Phoenix, AwardBIOS, PhoenixBIOS, and combinations thereof are trademarks of

Phoenix Technologies.

Microsoft Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

Winbond is a trademark of Winbond Electronics Corporation.

Portable Document Format (PDF) is a trademark of Adobe Corporation.

Federal Communications Commission (FCC)

Notice for the USA Compliance Information Statement (Declaration of

Conformity Procedure) DoC FCC Part 15: This device complies with

part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference, and

2) This device must accept any interference received including interference that

may cause undesired operation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try one or more of the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and the receiver.

— Plug the equipment into an outlet on a circuit different from that of the

receiver.

Consult the dealer on an experienced radio/television technician for help.

Notice for Canada

This apparatus complies with the Class B limits for radio interference as speci-

ﬁed in the Canadian Department of Communications Radio Interference Regula-

tions. (Cet appareil est conforme aux norms de Classe B d’interference radio tel

que speciﬁe par le Ministere Canadien des Communications dans les reglements

d’ineteference radio.)

Notice for Europe (CE Mark) This product is in conformity with the

Council Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture, mutilate, or

dispose of battery in ﬁre. Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by manufacturer.

Dispose of used battery according to manufacturer instructions and in accordance

with your local regulations.

iii

About this Manual

This manual provides you with instructions on installing your Transport GX18

B3095. This manual is intended for experienced users and integrators with hard-

ware knowledge of personal computers.

This manual consists of the following parts:

— Chapter 1: Descrives features of the Transport GX18 B3095 bare-

bone, and provides an overview of the system and packing

list.

— Chapter 2: Covers procedures on installing the mainboard components

and rack mounting.

— Appendix: Compares the differences between mainboard BIOS and

system BIOS. The technical support section also provides

helpful information of system maintenance and service.

For information on the mainboard, please refer to the attached mainboard user’s

manual. You can ﬁnd the detailed description about jumper and BIOS settings from

the motherboard manual.

SAFETY INFORMATION

Before installing and using the Trophy NR18 B3095, take note of the following

precautions:

— Read all instructions carefully.

— Do not place the unit on an unstable surface, cart, or stand.

— Do not block the slots and opening on the unit, which are provided for

ventilation.

— Only use the power source indicated on the marking label. If you are not sure,

contact the Power Company.

— The unit uses a three-wire ground cable, which is equipped with a third pin to

ground the unit and prevent electric shock. Do not defeat the purpose of this

pin. If your outlet does not support this kind of plug, contact your electrician to

replace your obsolete outlet.

— Do not place anything on the power cord. Place the power cord where it will

not be in the way of foot trafﬁc.

— Follow all warnings and cautions in this manual and on the unit case.

— Do not push objects in the ventilation slots as they may touch high voltage

components and result in shock and damage to the components.

— When replacing parts, ensure that you use parts speciﬁed by the

manufacturer.

— When service or repairs have been done, perform routine safety checks to

verify that the system is operating correctly.

— Avoid using the system near water, in direct sunlight, or near a heating device.

— Cover the unit when not in use.

Table of Contents

Chapter 1: Overview

1.1 About the Trophy NR18 B3095 1-1

1.2 Features 1-2

1.3 Accessories 1-5

1.4 Product View 1-6

Chapter 2: System Setup

2.1 Installing Motherboard Components 2-3

2.1.1 Removing the Chassis Cover 2-3

2.1.2 Installing CPU and Heatsink 2-4

2.1.3 Installing Memory 2-6

2.1.4 Installing the HDD 2-7

2.1.5 Installing PCI Card (optional) 2-10

2.2 Rack Mounting 2-12

Appendix: BIOS Differences A-1

Technical Support A-2

1-1

Chapter 1: Overview

1.1 About the Transport GX18 B3095

Congratulations on your purchase of the TYAN Transport GX18 (B3095),

a highly-optimized rack-mountable barebone system. The Transport GX18

(B3095) is designed to support single Intel® Yonah/Merom 2.33GHz pro-

cessor with 667/533MHz FSB, providing a rich feature set and incredible

performance. Leveraging advanced technology from Intel, the Transport

GX18 server system is capable of offering scalable 32 and 64-bit comput-

ing, high-bandwidth memory design, and a lightning-fast PCI bus imple-

mentation. The Transport GX18 not only empowers your company in to-

day’s demanding IT environment but also offers a smooth path for future

application usage.

The Transport GX18 uses TYAN’s latest tooling-made chassis featuring a

robust structure, tool-less and modularized design, and a solid mechanical

enclosure. All of this provides the Transport GX18 the power and ﬂexibility

to meet the needs of nearly any server application.

1-2

1.2 Features

Enclosure

— Industry 1U rack-mount chassis

— Dimension: W 17.13” x D 15.47” x H 1.73”

(W 435mm x D 393mm x H 43.5mm)

— HDD Tray: 3.5” SATA HDD x 2

Processor

— Intel 479-pin socket x 1, support single Intel Yonah/Merom 2.33GHz

CPU or higher

— Supports FSB 667/533MHz

Chipset

— Intel 945GM Memory Controller Hub

— Intel ICH7M-DH I/O Controller Hub

— Intel 82551QM FE LAN Controller

— Intel 82573V PCI-E Gigabit LAN Controllers

Memory

— 240-pin DDR2 socket x 2, supports 128MB, 256MB, 512MB, 1GB memory

— Dual channel memory bus

— Supports unbuffered DDR2 667/533/400 memory

Graphics

— Integrated Graphics support

Expansion Slot

— PCI 32bit slot x 1, support external output PCI card with 1-to-1 Riser Card

(optional)

Storage

— Supports 50-pin Compact Flash Type II x 1

— Supports 3.5” SATA HDD x 2

Inhaltsverzeichnis

Andere TYAN Server Handbücher

TYAN

TYAN Transport GX21 B2735 Bedienungsanleitung

TYAN

TYAN FT77-B7015 Kurzanleitung

TYAN

TYAN B8236G70W8HR-HE-IL Bedienungsanleitung

TYAN

TYAN GT90-B7113 Kurzanleitung

TYAN

TYAN TS65-B8036 Kurzanleitung

TYAN

TYAN Tank GT20 B5372-LH Bedienungsanleitung

TYAN

TYAN GT24B-B7076 Kurzanleitung

TYAN

TYAN GT62B-B7076 Kurzanleitung

TYAN

TYAN YR188-B537M Bedienungsanleitung

TYAN

TYAN B8226 Kurzanleitung

TYAN

TYAN GA88-B5631 Kurzanleitung

TYAN

TYAN Transport GX18 Bedienungsanleitung

TYAN

TYAN TA77-B7061 Kurzanleitung

TYAN

TYAN GT24 B8212 Bedienungsanleitung

TYAN

TYAN Transport GX28 B2881 Bedienungsanleitung

TYAN

TYAN FT48-B8812 Kurzanleitung

TYAN

TYAN Transport GT20 Bedienungsanleitung

TYAN

TYAN TA70-B8237 Kurzanleitung

TYAN

TYAN Transport GT14 B2933 Bedienungsanleitung

TYAN

TYAN GT24 B7016 Bedienungsanleitung

TYAN

TYAN YR190-B8228 Bedienungsanleitung

TYAN

TYAN Transport GT20 B5151 Bedienungsanleitung

TYAN

TYAN Transport GT20 B3970-U Kurzanleitung

TYAN

TYAN GT62A-B5512 Kurzanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

Planet

Planet NAS-7410 Bedienungsanleitung

Lenovo

Lenovo ThinkSystem SR635 V3 Bedienungsanleitung