Ubiquiti NanoSwitch N-SW Bedienungsanleitung

Outdoor 4-Port PoE

Passthrough Switch

Model: N-SW

Introduction

Thank you for purchasing the Ubiquiti Networks®

NanoSwitch™. This Quick Start Guide is designed to guide you

through installation and also includes warranty terms.

Package Contents

Outdoor 4-Port PoE

Passthrough Switch

Model: N-SW

NanoSwitch Self-Tapping

Screw

Metal Straps

(Qty. 2)

Quick Start

Guide

Installation Requirements

Mounting accessories and drain wire are not included.

Pole-Mounting

• Drill with a 4.5 mm Drill Bit

• 7 mm Socket Wrench or Screwdriver

Wall-Mounting

• (2) Screws (≤ 5 mm Screw Head)

• (1) Drain Wire, Optional (≤ 16 AWG, ≤ 40 cm)

Cables

• Shielded Category 5 (or above) cabling with drain wire

should be used for all wired Ethernet connections and

should be grounded through the AC ground of the PoE.

We recommend that you protect your networks from

harmful outdoor environments and destructive ESD events

with industrial-grade, shielded Ethernet cable from Ubiquiti

Networks. For more details, visit

www.ubnt.com/toughcable

product warranty. TOUGHCable™is designed for outdoor installations. It is the professional

installer’s responsibility to follow local country regulations, including operation within legal

frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.

• Surge protection should be used for all outdoor installations.

We recommend that you use two Ethernet Surge Protectors,

model ETH-SP, one near the N-SW and the other at the entry

point to the building. The ETH-SP will absorb power surges

and safely discharge them into the ground.

To LAN

ETH-SP

US-8-150W

N-SW

Hardware Overview

System LEDs

Port Cover

LED

The LED will light blue when the device is powered on.

PoE In

PoE Out

Ground Bonding

Point with a

Machine Screw

and Nut

RJ45 LEDs

LED State Status

Link Green Link Established

Activity Amber Flashing Indicates Activity

Ports

Port Description

PoE In RJ45 port supports 10/100/1000 Ethernet

connections, and supports 24V passive PoE to

power the switch.

PoE Out 1-3 RJ45 ports support 10/100/1000 Ethernet

connections, and the three 24V passive PoE

ports provide up to 36W PoE output.

Ground Bonding Point The NanoSwitch must be grounded

in one of the following ways:

• Use the Self-Tapping Screw to ground the NanoSwitch

directly to a grounded metal pole or structure.

• Use a Machine Screw and Nut to attach a drain wire (not

included) that is connected to a remote grounding block or

structure.

Connect a Drain Wire (Optional)

If a drain wire is used to ground the NanoSwitch, attach it to

the Ground Bonding Point with the Self-Tapping Screw and nut.

At the installation site, secure the other end of the drain wire

to a grounded mast, pole, tower, or grounding bar.

Note: The drain wire should be a short as possible and no

longer than one meter in length.

Hardware Installation

Install the NanoSwitch either on a pole or a wall. Follow the

appropriate steps for your installation:

Pole-Mounting

1. Feed the included Metal Straps through the slots located

on the back of the NanoSwitch.

2. Wrap the Metal Straps around the pole. Use a 7 mm socket

wrench or screwdriver to turn the screws clockwise and

securely fasten the straps to the pole.

3. Remove the Port Cover by pressing on its center and sliding

it down.

Note: If you are using a drain wire for grounding,

proceed to the Connecting Power section.

4. Remove the Self-Tapping Screw and nut from the Ground

Bonding Point, and drill a 4.5 mm pilot hole into the pole.

4.5 mm

Drill Bit

5. Insert the Self-Tapping Screw into the pilot hole. Securely

fasten the screw to ensure the Ground Bonding Point is

bonded to the pole.

Wall-Mounting

1. Secure two screws (not included) to the wall, spaced

38mm apart.

2. Leave a gap of 3 mm from each screw head to the wall.

≤ 5 mm

3mm

3. With the drain wire already attached, insert the screw

heads into the Keyhole Slots on the back of the NanoSwitch.

Press down on the NanoSwitch to secure it.

Keyhole

Slots

*640-00314-01*

640-00314-01

Inhaltsverzeichnis

Andere Ubiquiti Schalten Handbücher

Ubiquiti

Ubiquiti ES-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti USW-24 Bedienungsanleitung

Ubiquiti

Ubiquiti ES-48-500W Bedienungsanleitung

Ubiquiti

Ubiquiti USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 24 US-24-250W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch ES-16-150W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 5XP Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch 48 LITE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-16-POE Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeSwitch ES-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti ETHERMAGIC EM-S Bedienungsanleitung

Ubiquiti

Ubiquiti EdgePoint S16 Bedienungsanleitung

Ubiquiti

Ubiquiti USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti TS-16-CARRIER Bedienungsanleitung

Ubiquiti

Ubiquiti US-16-XG Bedienungsanleitung

Ubiquiti

Ubiquiti TS-5-POE ToughSwitchPoE Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi US-8-60W Bedienungsanleitung

Ubiquiti

Ubiquiti EdgeRouter PoE ERPoe-5 Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi Switch 24 Bedienungsanleitung

Ubiquiti

Ubiquiti TS-16-CARRIER Bedienungsanleitung

Ubiquiti

Ubiquiti UniFi USW-Industrial Bedienungsanleitung

Ubiquiti

Ubiquiti ES-24-250W Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch