Uclan Denys 2.2 Bedienungsanleitung
User manual English language
Digital DVB-S / S2 / T2-MI / MS HDTV
receiver / IPTV / OTT media player
Denys 2.2
CAUTION!
To avoid the risk of electric shock, do not disassemble the receiver.
There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
This receiver was manufactured in accordance with international safety standards.
Please read the following precautions carefully.
Safety Instructions and Precautions:
- Power supply network connection (100-240V ~ 50/60Hz)
• Connect this receiver only to the type of network indicated on the label
• Unplug the receiver from the electrical outlet before beginning any maintenance or installation
- Connecting to antenna
• Disconnect the receiver from the network before connecting or disconnecting the cable from the
antenna
• Failure to do so may result in damage to the receiver or antenna
**
- Connecting to a TV
• Unplug the receiver from the electrical outlet before connecting or disconnecting the cable from
the TV
Failure to comply may result in damage to the receiver or TV
- Liquids
• The receiver must not be exposed to liquids of ANY kind!
**
- Cleaning
• Unplug the receiver from the electrical outlet before cleaning
• To remove dust, use a light damp cloth, without solvents
**
- Ventilation
• Do not place the receiver on furniture or carpets
• Do not place any objects on top of the receiver
• Do not restrict air circulation around the receiver
****
- Earthing
• The antenna cable must be grounded!
**
- Foreign objects
• Do not insert anything through the openings in the receiver, since you can touch a hazardous
voltage point or damage the receiver
- Location
• Use the receiver indoors, to avoid damaging it by weather
• Do not install the receiver near a radiator or other heat source
• Dropping the product may result in personal injury and serious damage to the receiver
- Lightning, storm
• Unplug the receiver from the wall outlet and disconnect the antenna during a lightning storm or
when unused for long periods of time
• This will prevent damage to the circuit due to lightning or voltage fluctuations
**- Repair
• If it is necessary to repair, it is necessary to be sure of the qualification of the service
• Unauthorized repairs can lead to additional damage
- FRONT PANEL:
• Digital channel / time display
Displays the current channel number or time (depending on the menu setting)
• LED status indicator
Displays the current status of the receiver (red / green)
• Receiver of IR signals
The sensor of the IR signals from remote control
- REAR AND SIDE PANELS:
• LNB IN
Satellite dish connection. Use F-type plug only!
• AV
Composite AV output for old (CRT) TV-set connection
• SPDIF
Digital audio output
• HD OUT
High quality digital audio and video output (up to 1080p60Hz)
• ETHERNET
Ethernet LAN connection to network 10/100Mbps
• DC 12V
Power socket. Attention! You must use the original power adapter included in the box!
Output adapter: 12 volts
• LED/IR
To connect an external IR sensor with LED display
• 2 USB ports
Used to play media files, update software and work with WiFi / 3G / USB dongles
• RECOVERY (emergency button)
Used to enter procedure emergency update software for repair system files.
REMOTE CONTROL with LEARNING FUNCTION
Note: Learning functions procedure manual placed on the bottom of remote control unit!
Button
Function
Button
Function
On/Off STB power supply
+ PAGE -
Change channel + or -
Mute
0 ~ 9
Direct input channel number
AUDIO
Choose audio
SAT
Call satellites list
MENU
Show Main menu
EXIT
Exit to last menu
OK
Perform action
← →
For move in menu
LEFT/RIGHT
↑ ↓
For move in menu
UP/DOWN
EPG
Call EPG (Electronic
Program Guide)
INFO
Show channel or event
Information
TV/RADIO
Switch between TV and
RADIO
FAV
Show Favorites list
RECALL
Last channel call
SUBTITLE
Subtitles
TEXT
Teletext mode
SLEEP
Sleep timer
REC
Press for record
F1-F4
Programmable buttons
V.FORMAT
Change screen format
OPTION
Options button
RESOLUTION
Change screen resolution
Stop play or record
PAUSE
Press for PAUSE
Press for Rewind
Press for Fast Forward
YouTube
Directly open YouTube app
Media
Directly open USB
resources
Weather
Directly open Weather app
TV Control
Learning buttons for TV
SET
- INSTALLATION
Connection antenna
Connect your dish to LNB IN
Using HDTV cable
For digital television, it is recommended to connect using an HD cable.
In case the TV has an input HD connector, it is advisable to use it to get a better image quality.
Using RCA cable
If no HD input on your TV-set, then can connect STB to TV-set using the RCA cable.
- START USING STB
Switch ON STB
Plug the STB power adapter into an electrical outlet.
Press the power button located on the remote control.
First installation and channels search
The first time you turn on the receiver, you will see the First install menu:
In this menu, you can select the menu language and go to the antenna setup:
In the antenna setup menu, you must select the satellites available to you, set the corresponding
LNB settings and DiSEqC switches. Then you can start the search by pressing the red button.
... when the search is over, you will see a list of the channels found.
Channels editor
After searching, you can edit the channel list if you want.
To do this, go to the Channel Editor:
Using the function buttons, you can edit the channel list according to your preferences.
Audio/Video settings
If necessary, you can adjust the format and resolution (quality) of the image, and also configure
the digital audio output using the Audio / Video settings menu:
- Access password
If the receiver asks for an access password, enter it ... By default, the factory password is 0000.
- EPG (Electronic Program Guide – TV Guide)
TV Gude: Electronic program guide for the week ahead, provided by the operator for each
received satellite channel. To enter the program, press the EPG button on the remote control.
There are 2 options for displaying the TV guide: vertical and horizontal.
- Mediaplayer
Denys 2 allows you to play high-quality media files on USB or on the local network using SAMBA
or DLNA.
- DLNA
Denys 2 Allows you to work with DLNA, for this there is no need to make any special settings:
DLNA function is enabled and works constantly.
- Connecting to the Internet
To connect to the network, Denys 2 is equipped with an Ethernet LAN port, and also supports the
connection of external USB-WiFi or USB-3G adapters.
- Software update
Software updates for Denys 2, can be found in the receiver menu:
TECHNICAL SPECIFICATIONS
In accordance with the Directive 2012/19/UE of the European Parliament and of the Council of 4
July 2012 on waste electrical and electronic equipment, the device is to be properly disposed of
once its lifetime is over. The device cannot be disposed of with the municipal waste. The device
consists of metal, polymer and electrical elements. The device is to be disposed of at an e-waste
collection point. We hereby inform that the main objective of the European regulations and of the
Act of 11 September 2015 on waste electrical and electronic equipment is to limit the amount of
waste from equipment, ensure an adequate level of collection, recovery and recycling of waste
electrical as well as increase public awareness of the equipment’s harmful effect on natural
environment.
CORRECT DISPOSAL OF ELECTRICAL EQUIPMENT PRESERVES VALUABLE RESOURCES
AND PREVENTS THE NEGATIVE IMPACT THAT IMPROPERLY HANDLED WASTE
ELECTRICAL MAY HAVE ON HUMAN HEALTH AND ENVIRONMENT.
Tuner
Frequency range
950 ~ 2150MHz
Input level
-80 ~ -20dBm
Modulation
DVB-S: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6,
8/9, 9/10, (QPSK) 3/5, 2/3, 3/4, 5/6,
8/9, 9/10 (8PSK), 16APSK, 32APSK
Video
Decoder format
MPEG2/4, H.264, H265, AVS, AVS
plus, JPEG/MJPEG HD
Picture resolutions
HD 1.4 (1080p, 1080i, 720p, 576p,
480p)
Picture format
4:3, 16:9, Auto
Outputs
HD OUT(1.4), CVBS
Audio
Decoder format
MPEG1, MPEG2 Layer 1&2, DD AC3,
DD++, AAC/HE-AAC, MP3
Audio outputs
RCAx2(L/R), DIGITAL OUT
USB2.0 x 2
Volume support
No limited
Data formats supported
MP3, WMA, JEPG, BMP, AVI, MKV
and others
Power supply
Power adapter
100~240V 50/60Hz (external power
supply) to 12v DC
Maximum energy
consumption
10W
Energy consumption in
STBY mode
<0.5W
Інструкція користувача Українська мова
Цифровий DVB-S / S2 / T2-MI / MS HDTV
приймач / IPTV / OTT медіаплеєр
Denys 2.2
Inhaltsverzeichnis
Sprachen:
Andere Uclan Empfänger Handbücher
