Ultimaker 2 Extended Bedienungs- und Wartungshandbuch

FABLAB

FabLabBRUGERVEJLEDNING BASIC USER GUIDE

3D-PRINTER ULTIMAKER 2

Marts 2016 March 2016

12345Model 3D object

Export GCode to SD card

Start 3D-printing

Fjern den printede model og sluk for 3D-printeren

Set 3D-printer parameters in CURA

Modeller 3D gur

Indstil 3D-printerens parametre i CURA

Eksporter Gkode til SD kort

Påbegynd 3D-printning

Remove printed object and turn of 3D-printer

PROCESS FORLØB

PROCESS STEPS

3D-PRINTERULTIMAKER2

11. Skab en 3D-model med CAD-/3D modellerings software som f.eks.123d Design, Tinkercad,

Google Sketchup, Blender, OpenSCAD, FreeCAD, Rhino eller Inventor.

1. Create a 3D- model with a CAD-/3D modeling- software such as for example: 123d Design,

Tinkercad, Google Sketchup, Blender, OpenSCAD, FreeCAD, Rhino or Inventor.

2. “Gem/Eksporter” din 3D-model som .stl format.

2. “Save/Export” your 3D-model as a .stl format

Alternativ: Download en eksisterende model

fra en web platform som f.eks. YouMagine,

Thingiverse, Yeggi, Instructables etc.

Alternatively: Download an already existing model

from a web platform such as: YouMagine,

Thingiverse, Yeggi, Instructables etc.

Model 3D object

Modeller 3D gur

2Set 3D-printer parameters in CURA

Indstil 3D-printerens parametre i CURA

2. Vælg en af de følgende predenerede printindstillinger:

- Fast print

- Normal print

- High quality

- Ulti quality

2. Choose one of the following quality presets:

- Fast print

- Normal print

- High quality

- Ulti quality

3. Vælg “Print support structure” såfremt din model indeholder overødigt materiale

(see here for more information about udhæng).

3. Click on “Print support structure” if your model contains any overhang

(see here for more information about overhang).

1. Importer din .stl l til Cura.

1. Import your .stl le into Cura.

31. Tag SD kortet fra en Ultimaker og indsæt det i din computers SD kortlæser.

1. Insert the SD card from one of the Ultimakers into your computer’s SD cardreader.

Export GCode to SD card

Eksporter Gkode til SD kort

2. Klik på disk ikonet for at gemme din models GKode på SD kortet, eller gå til “File” og vælg

“Save GCode”. Vælg herefter SD kortet som drev destination.

2. Click on the disk icon to store the GCode of your model to the SD card OR go to "File" and

"Save GCode". Chose the SD card as your destination source.

3. Fjern herefter SD kortet fra din computers kortlæser.

3. Eject SD card from your computer’s cardreader.

4Start 3D-printing

Påbegynd 3D-printning

1. Tænd 3D-printeren.

1. Turn on the 3D-printer.

2. Tag en limstift. Påfør et tyndt lag lim på glaspladen på det sted, hvor din 3D-model skal

printes. Dette vil gøre det nemmere at fjerne din 3D-model fra pladen efter print.

2. Put a thin layer of glue from the glue stick onto the glass plate in the area where your 3D-object

will be printed. This will simplify the process of getting o your 3D-object from the glassplate.

3. Tag SD kortet ud af din computers kortlæser og indsæt det i en Ultimaker.

3. Take SD card out of your computer’s card reader and put it into the SD slot of one

of the Ultimakers.

4. Benyt “push” og “rotate” knappen på din Ultimaker for at navigere til “Print” og tryk der-

efter knappen til “enter”. Vælg din l og tryk på knappen for at påbegynde printprocessen.

4. Use the push and rotate button on the Ultimaker to navigate to “Print” and press Button to enter.

Then scroll to your le and press Button to start printing process.

5. Forlad ikke 3D-printeren før din 3D-model er færdigprintet. Hold øje med print processen,

så du kan nå at afbryde den, såfremt printet ikke bliver som ønsket.

5. Don’t just walk away and wait until the 3D-printer is done with your print. Have an eye on the

printing process once in a while in order to be able to intervene early enough if the print is not

turning out the way you wanted it to be.

5Fjern den printede model og sluk for 3D-printeren

Remove printed object and turn of 3D-printer

1. Vent 5 minutter med at fjerne din 3D-model fra printpladen, når den er færdigprintet,

så den kan nå at køle ned.

1. When the print is done wait for ca. 5 minutes before you take your printed 3D-object from the

printing plate in order for the printing plate to cool down.

Print teknologi Fused lament fabrication (FFF)

Bygge volumen 23 x 22,5 x 20,5 cm

Lag opløsning - 20 mikrometre (ultrahøj opløsning)

- 60 mikrometre (høj opløsning)

- 100 mikrometre (medium opløsning)

- 200 mikrometre (lav opløsning)

Glødetrådens diameter 2.85 mm

Dyse diameter 0.4 mm

Print hastighed 30 mm/1 - 300 mm/s

Rejse hastighed 30 mm/1 - 350 mm/s

Fil typer STL / OBJ / DAE / AMF

Support til netværksoperativsystem Windows (XP 32 bit / 7+), Ubuntu Linux (12.04+) & Mac OS X (10.6 64bit +)

Print technology Fused lament fabrication (FFF)

Build Volume 23 x 22,5 x 20,5 cm

Layer resolution - 20 micrometre (Ultra high resolution)

- 60 micrometre (High resolution)

- 100 micrometre (Medium resolution)

- 200 micrometre (Low resolution)

Filament diameter 2.85 mm

Nozzle diameter 0.4 mm

Print speed 30 mm/1 - 300 mm/s

Travel speed 30 mm/1 - 350 mm/s

File types STL / OBJ / DAE / AMF

Operating system support Windows (XP 32 bit / 7+), Ubuntu Linux (12.04+) & Mac OS X (10.6 64bit +)

Specikationer for Ultimaker 2

Specications for Ultimaker 2

Find ere informationer omkring Ultimaker 2 her: https://ultimaker.com/en/support/view/16554-user-manual

For more details about the Ultimaker 2 specs have a look here: https://ultimaker.com/en/support/view/16554-user-manual

BASIS SPECIFIKATIONER

BASIC SPECS

3D-PRINTERULTIMAKER2

Andere Handbücher für 2 Extended

Inhaltsverzeichnis

Andere Ultimaker 3D-Drucker Handbücher

Ultimaker

Ultimaker ORIGINAL+ Bedienungsanleitung

Ultimaker

Ultimaker Ultimaker S5 Pro Bundle Bedienungsanleitung

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker ORIGINAL+ Bedienungsanleitung

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker 2+ Connect Gebrauchs- und Pflegehandbuch

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker Original Bedienungsanleitung

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

Ultimaker

Ultimaker EXTRUSION UPGRADE Bedienungsanleitung

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker 3 Extended Betriebsanleitung

Ultimaker

Ultimaker 3 Extended Leitfaden

Ultimaker

Ultimaker 3 Extended Leitfaden

Ultimaker

Ultimaker 3 Extended Einrichtungshandbuch

Ultimaker

Ultimaker 3 Extended Leitfaden

Ultimaker

Ultimaker 2 Extended Bedienungsanleitung

Ultimaker

Ultimaker 3 Extended Leitfaden

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

Ultimaker

Ultimaker S5 Material Station Bedienungsanleitung

Beliebte 3D-Drucker Handbücher anderer Marken

EcubMaker

EcubMaker TOYDIY Bedienungsanleitung

AnyCubic

AnyCubic Kossel Plus Bedienungsanleitung

ReDeTec

ReDeTec ProtoCycler Bedienungsanleitung

Kywoo3D

Kywoo3D Tycoon IDEX Bedienungsanleitung

CraftBot

CraftBot PLUS PRO Bedienungsanleitung

3DGence

3DGence INDUSTRY F340 Bedienungsanleitung

HP Jet Fusion 4200 Betriebsanleitung

Rokit

Rokit AEP Series Bedienungsanleitung

AnkerMake

AnkerMake M5 Bedienungsanleitung

DIYElectronics

DIYElectronics PRUSA I3 Montageanleitung

Ackuretta

Ackuretta FreeShape 120 Bedienungsanleitung

LONGER

LONGER LK5Pro Bedienungsanleitung

Stratasys

Stratasys J850 Bedienungsanleitung

MakerBot

MakerBot Replicator Bedienungsanleitung

Stratasys

Stratasys FDM Vantage Series Bedienungsanleitung

ZYYX

ZYYX Pro II Bedienungsanleitung

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Benutzerhandbuch

LONGER

LONGER LK4 Pro Bedienungsanleitung