Uniden TWX955 Series Bedienungsanleitung

UNIDEN

CORDLESS

TELEPHONES

TWX955 Series

Welcome

Congratulations on your purchase of the Uniden TWX955

waterproof accessory handset. You can place this fully featured

cordless handset anywhere your home has AC power-- even

outside by the pool!

What Exactly does “Waterproof Handset” Mean?

Your handset complies with the JIS7 water submersion

specications. This means the handset can remain submerged

under 3 feet of water for up to 30 minutes without damage or

loss of functionality.

The handset will still receive calls even if it is under water, but

you probably won’t be able to hear the ringer. To avoid any

accidents, do not try to use the handset while it is still under

water.

After your handset is submerged in water, you might notice

that the sound is distorted. This is because there is still water

remaining in and around the speaker and microphone. Just

shake the handset to clear excess water, and the sound should

return to normal.

Is the Charging Cradle Waterproof?

The charging cradle is not waterproof: it is water resistant.

The cradle uses a special method called magnetic inductive

charging, so it can charge your handset without exposing any

electronic components. (You may notice that the charging

contacts are enclosed in plastic and there is no metal showing.)

This charging method makes the cradle safe to use near water

or in highly humid environments, but is it not designed to be

submerged in water.

If the charging cradle falls into water, unplug it before

attempting to remove it from the water. Allow the cradle to dry

completely before reconnecting the power.

Accessibility

Uniden provides a customer service hotline for accessibility

questions. If you have a disability and need customer service

assistance or if you have any questions about how Uniden's

products can accommodate persons with disabilities, please call

the accessibility voice/TTY line: 1-800-874-9314.

Our customer care hours as well as accessibility information

can be found on our website, www.uniden.com, under the

"Accessibility" link. If your call is received outside of our business

hours, you can leave us a message and we will call you back.

Important!

The TWX955 accessory handset will not operate until it is

registered to a Uniden base. This manual describes how to set

up your new handset; for more detailed instructions on operating

your new handset, please refer to the manual supplied with your

base. The TWX955 waterproof accessory handset operates just

like a regular TRU9500 series handset.

Terminology Used in this Manual

Accessory

Handset

A handset that works with an expandable phone base.

Accessory handsets must be registered to a base.

Base The main part of the phone that connects to your phone

line, and lets you make and receive calls.

Charging

cradle

A cradle that charges an accessory handset. It connects to

power but not to a phone line.

Standby

The handset is not in use. No line has been activated.

(It doesn’t matter whether the handset is in the cradle.)

No dial tone is present.

Station Any registered handset or the base.

Talk A dial tone has been enabled, so you can dial and carry on

a conversation with an outside party.

Note: Illustrations in this manual are used for explanation purposes.

Some illustrations may differ from the actual unit.

Uniden®is a registered trademark of Uniden America Corporation.

Compatible Bases

This handset is compatible with Uniden's 5.8 GHz Digital

Expandable phone system: the TRU9500 series. Please visit

our website at www.uniden.com for the most up-to-date list of

compatible bases.

Installing the Accessory Handset

Checking the Package Contents

Make sure your package contains the following items. If any

items are missing or damaged, contact our Customer Service

Hotline. See the back cover page for contact information.

• Cordless Handset • Belt Clip

• Charging cradle • Printed Material

• AC Adapter (model # PS-0011: Input 120V AC, 60 Hz; Output

19V DC, 100 mA)

• Rechargeable NiMH Battery Pack (model # BT-446: Capacity

800 mAh, 3.6V)

Activate the Handset

The handset is powered by a rechargeable battery pack already

installed in the handset’s battery compartment.

Note: Use only the Uniden BT-446 rechargeable battery pack supplied

with your cordless telephone.

Before charging

the battery for the

first time, push

the activation

pin, located on

the bottom of

the handset

(see label with

instructions).

Once you activate

the handset, remove

the label.

Before charging

the battery for the

first time, push

the activation

pin, located on

the bottom of

the handset

(see label with

instructions).

Once you activate

the handset, remove

the label.

Charging the Accessory Handset

Use only the Uniden PS-0011 AC adapter with the charging

cradle.

What if the charge LED

doesn’t light up?

Check the AC adapter connection.

Make sure you are not using an outlet

that’s controlled by a wall switch.

Make sure that the

charge LED

illuminates when the

handset is seated.

Connect the AC

adapter to a

standard 120V

AC wall outlet.

Connect the AC adapter to the

DC IN 19V jack on the bottom

of the charging cradle, and

place the cord through the

molded wiring channel.

Place the handset in the charging

cradle with the display facing forward.

Charge your handset at least 25 hours before

using your new handset for the first time.

What if the charge LED

doesn’t light up?

Check the AC adapter connection.

Make sure you are not using an outlet

that’s controlled by a wall switch.

Make sure that the

charge LED

illuminates when the

handset is seated.

Connect the AC

adapter to a

standard 120V

AC wall outlet.

Connect the AC adapter to the

DC IN 19V jack on the bottom

of the charging cradle, and

place the cord through the

molded wiring channel.

Place the handset in the charging

cradle with the display facing forward.

Charge your handset at least 25 hours before

using your new handset for the first time.

Notes: • For best results, wipe off dirt or shake water from handset

before placing in the charging cradle.

• Due to the magnetic inductive charging used with this model

the bottom of the handset might be warmer than room

temperature when you rst remove it from the charging cradle.

However, the warmth should not be excessive or

uncomfortable to touch.

• Do not place the power cord where it creates a trip hazard or

where it could become chafed and create a re or electrical

hazard.

Caution:

Keep magnetic items away from the handset.

Don’t place the handset where it will be subjected to direct

sunlight for long periods of time.

Registering the Handset

If you have purchased this accessory handset separately, it must

be registered to a TRU9500 series base before you can use it.

Notes: • The handset must be fully charged before attempting to

• Only one handset can be registered at a time.

Handsets that have not been registered display:

To register to a TRU9565 base:

• Disconnect the base AC adapter. Then press and hold

[Int’com] while you reconnect the adapter. Keep pressing

[Int’com] until the charge/in use LED starts to blink.

To register to a TRU9585 base:

• With the phone in standby, press [menu/select] on

the base. Press [ ] to move the cursor to REGISTER

HANDSET and then press [menu/select]. HANDSET

REGISTERING appears.

On the handset, press and hold [#] until the handset beeps

and displays HANDSET REGISTERING.

When the handset nishes registering, it shows

REGISTRATION COMPLETE in the display.

Resetting the Handset

If you want to register the handset to a different base or replace

a handset with another one, you must rst clear the registration

information from the base and the handset.

Press and hold [ ] and [#] for at least ve seconds, until the

SYSTEM RESET menu appears.

Select the DEREGISTER HS

submenu by pressing [menu/

select]. WHICH HANDSET?

appears in the display.

Use [ ] or [ ] to select the handset ID to be de-

registered from the list, and then press [menu/select].

DEREGISTER HS appears.

Press [ ] to move the cursor to YES, and then press

[menu/select]. You will hear a conrmation tone.

Resetting the Handset Without the Base

If the original base this handset was registered to is not

available for some reason (for example, it is lost or somehow

incapacitated), you can still reset the handset and use it with

another base.

Press and hold [ ] and [#] for at least ve seconds, until the

SYSTEM RESET menu appears.

Press [ ] to move the cursor to BASE UNAVAILABLE and

then press [menu/select]. BASE UNAVAILABLE appears.

Press [ ] to move the cursor to YES, and then press

[menu/select]. You hear a conrmation tone, and the

handset deletes its own link to the base without trying to

contact the base.

Now you are ready to register the handset to the new base.

9JKEJ*CPFUGV!

*CPFUGV

*CPFUGV

9JKEJ*CPFUGV!

*CPFUGV

*CPFUGV

What if the display shows REGISTRATION FAILED?

Repeat the process starting with step 1.

Replace the Rechargeable Handset Battery Pack

Remove the four screws

holding the battery

compartment with a

screwdriver and take off

the battery cover. Remove

the old battery pack from

the battery compartment.

Line up the red and black

wires with the polarity label

in the battery compartment

(the connector only ts one

way). Push the connector

in rmly; you should hear

the connector click into

place.

Tug on the battery wires

slightly to make sure you

have a good connection.

Before placing the battery

cover back on the handset,

check the rubber seal

located on the under side

of the cover: make sure

that the seal is in good

condition and that there

is no foreign matter under

the seal.

Note: If the rubber seal

appears warn, nicked, or dried

out, replacement seals are

available through the Uniden

Parts Department. See the

back cover page for contact

information.

Insert the bottom end of

the cover into the grooves

on the handset and lay

the cover over the battery

compartment. Tighten the

four screws securely.

Notes: • If there is any foreign

matter on the rubber seal

located on the under side

of the battery cover, the

handset may not be

water tight.

• The rubber seal should

be replaced every two

years, even if it does not

look worn.

Installing the Belt Clip

Insert the tabs on the sides of the belt clip

into the holes on either side of the handset.

Press the belt clip down until it clicks into

place. (Tug on the clip to make sure it’s

secure.)

To remove the belt clip, gently pull the tabs

out of the holes, then slide the belt clip off

of the handset.

Using the Interface

Parts of the Handset

[ ] key (down)

[ ] key (caller ID/right)

[menu/select] key

[ ] key (end call)

[#] key

[ ] key (speaker)

Microphone

[ ] key (up)

new message LED

Earpiece

Display (LCD)

[clear/int’com] key

(clear/intercom)

[ ] key (phonebook/left)

[ /flash] key (talk/flash)

Belt clip hole

Speakerphone

speaker and ringer

Battery compartment

Twelve-key dial pad

[ /mute] key

(messages/mute)

[ /tone] key

[redial/pause] key

[ ] key (down)

[ ] key (caller ID/right)

[menu/select] key

[ ] key (end call)

[#] key

[ ] key (speaker)

Microphone

[ ] key (up)

new message LED

Earpiece

Display (LCD)

[clear/int’com] key

(clear/intercom)

[ ] key (phonebook/left)

[ /flash] key (talk/flash)

Belt clip hole

Speakerphone

speaker and ringer

Battery compartment

Twelve-key dial pad

[ /mute] key

(messages/mute)

[ /tone] key

[redial/pause] key

Inhaltsverzeichnis

Andere Uniden Schnurloses Telefon Handbücher

Uniden

Uniden XDECT R003 Bedienungsanleitung

Uniden

Uniden XC 320 Bedienungsanleitung

Uniden

Uniden DSS7815 +1 Series Bedienungsanleitung

Uniden

Uniden EXS 2060 Montageanleitung

Uniden

Uniden TRU9085 Series Bedienungsanleitung

Uniden

Uniden EXI 6960 Bedienungsanleitung

Uniden

Uniden XCAI680 Bedienungsanleitung

Uniden

Uniden EXP2800 Bedienungsanleitung

Uniden

Uniden TRU 8860 Series Bedienungsanleitung

Uniden

Uniden XDECT R006 Bedienungsanleitung

Uniden

Uniden EXS9500 Bedienungsanleitung

Uniden

Uniden EXI 3965 Bedienungsanleitung

Uniden

Uniden DMX 776 SERIES Bedienungsanleitung

Uniden

Uniden DCX730 Series Bedienungsanleitung

Uniden

Uniden DECT4096RE Service-Handbuch

Uniden

Uniden DECT1588 Series Bedienungsanleitung

Uniden

Uniden DSS3415+1 Bedienungsanleitung

Uniden

Uniden EXT1160 Bedienungsanleitung

Uniden

Uniden DXI665 Bedienungsanleitung

Uniden

Uniden DX 834 Series Bedienungsanleitung

Uniden

Uniden DX14560 DX14561 Bedienungsanleitung

Uniden

Uniden EXV 990 Bedienungsanleitung

Uniden

Uniden DWX207 Series Bedienungsanleitung

Uniden

Uniden EXS 2050 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

Panasonic

Panasonic KX-TGK210HK Bedienungsanleitung

Panasonic

Panasonic KX-TCA181EX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Panasonic

Panasonic KX-TG1831NZ Bedienungsanleitung

Panasonic

Panasonic KX-TG7301E Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung