Uniden App Cam Solo Pro Series Bedienungsanleitung

App Cam Solo Pro

Series

Quick Start Guide

What’s in the Box

Screw Kit

Micro USB Cable

Straping Mount

App Cam Solo Pro

Magenetic Mount

Metal Mount

Quick Start Guide

Mounting Template

Reset Needle

General Introduction

Red LED (WiFi connection failed)

Blinking: Standby status

On: Working status

Blue LED (WiFi connection succeeded)

Blinking: Standby status

On: Working status

Built-in Mic

Status LED

Lens

Daylight Sensor

Built-in PIR Sensor

Reset Hole

Press more than 5 seconds to restore

the device to factory settings

Power Switch

Micro SD Card Slot

Speaker

Micro USB Power Port

Battery Status LED

Spotlight

Charge the Battery

There is a status LED under the micro USB port of the camera, indicating the battery charging status.

Green LED: Fully charged Orange LED: Charging

LED Battery Status

* The battery is built-in,please do not remove it from the camera.

* Please note that the USB charger and Solar Panel are NOT included in the package. You can buy the

solar panel separately.

1. Charge the battery with a

power adapter.

2. Charge the camera with

Uniden solar panel.

Note:

If the camera will not be in use for

a very long time, it’s suggested to

turn it off.

Turn on the Camera

The camera is turned off by default, please turn it on before setting up the camera.

App Cam Solo Pro is not designed for 24/7 full capacity running or around-the-clock live streaming.

It’s designed to record motion events and remotely view live streaming only when you need it.

1. Please charge the rechargeable battery with a standard and high-quality DC 5V or 9V battery charger.

2. If you want to power the battery via the solar panel, please note that the battery is ONLY compatible with SPS-01/

SPS-02 solar panel. You cannot charge the battery with other solar panel brands.

3. Please charge the battery in temperatures between 0°C and 45°C.

4. Always use the battery in temperatures between -20°C and 60°C.

5. Please keep the USB charging port dry, clean and free of any debris and make sure the battery contacts are aligned.

6. Always make sure the USB charging port is clean.

7. Please cover the USB charging port with the rubber plug after the battery has been fully charged.

8. Never charge, use or store the battery near any ignition sources, such as re or heaters.

9. Always store the camera in a cool, dry and ventilated environment.

10. Never store the camera with any hazardous or combustible objects.

11. Do keep the battery away from children.

12. Do not short-circuit the battery by connecting wires or other metal objects to the positive (+) and negative (-)

terminals. Do NOT transport or store the battery with necklaces, hairpins or other metal objects.

13. Do NOT disassemble, cut, puncture, short-circuit the battery, or make it dispose of in water, re,microwave ovens and

pressure vessels.

14. Do NOT use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal

in any ways. If the battery is being used or charged, remove the battery from the device or the charger immediately,

and stop using it.

15. Always follow the local waste and recycle laws when throwing the used battery away.

Important Safeguards on Rechargeable Battery Use

Install Uniden Solo App

Set up the Camera

There are two ways to get the Uniden Solo App:

• Search “Uniden Solo” in App Store (for iOS),

download and install the app.

• Search “Uniden Solo” in Google Play (for Android),

download and install the app.

Please follow the prompt tone to

congure the camera

Camera has been started

up. Please run app, add the

camera and set it up.

1. Please tap the “ ” button in the

top right corner to add the camera.

2. Scan the QR code on the back

of the camera.

3. Tap “WiFi Not Congured”

to continue.

Note:

When the setup for the

camera is completed, your

family can access the cam-

era simply by clicking “WiFi

Already Congured” without

reconguring it.

App Cam Solo Pro Camera

can only connect to 2.4GHz

Wi-Fi.

4. Select “I have heard the voice prompt”

and tap “Next” to enter the next page.

If you did not hear the voice prompt, please

press “I didn’t hear the voice prompt” for help.

5. Enter the Wi-Fi password of the selected

Wi-Fi network and tap “Next” to continue.

6. Tap “Scan Now” to proceed. A QR code will be generated on the phone. Please place the QR

code on your phone towards App Cam Solo Pro camera’ lens at a distance of about 20cm to let

the camera scan the QR code. Please make sure that you’ve ripped the protection lm of the

camera’s lens.

Note: To help scanning, please tap the QR code to display in full screen

Scan succeeded. Camera is connecting to the router. Please wait.

7. If you hear the above voice prompt, please

press “I heard ‘Wi-Fi connection failed’ ”

for help.

Connection to the router failed!

8. If you hear the above voice prompt, please

press Select “I have heard the voice prompt”

and tap “Next” to enter the next page.

to nish the quick setup.

Connection to the router succeeded.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Uniden Sicherheitskamera Handbücher

Uniden

Uniden App Cam 4K Bullet-S Bedienungsanleitung

Uniden

Uniden UDS655 Bedienungsanleitung

Uniden

Uniden Pro710NPTZC Bedienungsanleitung

Uniden

Uniden APPCAM23 Service-Handbuch

Uniden

Uniden APPCAM25HD Bedienungsanleitung

Uniden

Uniden UDRC14 Bedienungsanleitung

Uniden

Uniden App Cam Spotlight+ Bedienungsanleitung

Uniden

Uniden LightCam 40HD Bedienungsanleitung

Uniden

Uniden G101 Bedienungsanleitung

Uniden

Uniden APPCAM23 Bedienungsanleitung

Uniden

Uniden APPCAM23A Bedienungsanleitung

Uniden

Uniden App Cam Home Bedienungsanleitung

Uniden

Uniden NVR - 8 Bedienungsanleitung

Uniden

Uniden Guardian App Cam Solo Bedienungsanleitung

Uniden

Uniden UDWC25 Bedienungsanleitung

Uniden

Uniden UDRC58HD Bedienungsanleitung

Uniden

Uniden App Cam Solo PT Bedienungsanleitung

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden SOLO+ Bedienungsanleitung

Uniden

Uniden AppCam 4OPT Bedienungsanleitung

Uniden

Uniden Guardian GC45 Service-Handbuch

Uniden

Uniden UDS655 Bedienungsanleitung

Uniden

Uniden UWS1100 Bedienungsanleitung

Uniden

Uniden UDS655 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung