Uniden Guardian App Cam Solo Bedienungsanleitung

Uniden

App Cam Solo

Battery Powered Camera

OWNER’S MANUAL

For more exciting new products please visit our website:

Australia: www.uniden.com.au

IMPORTANT SAFETY INSTRUCTIONS

Damages caused by non-compliance with this Owner’s Manual will void the

warranty! We will not assume any liability for damages to items or persons

caused by improper handling or non-compliance with the safety notices! Any

warranty claim will be null and void in such cases.

•Do not drop, puncture or disassemble the camera. DO NOT expose the

camera to excessive water or moisture.

•Never tug on the power cords. Use the plug to unplug it from the outlet.

•Do not expose the camera to high temperature or leave it in direct

sunlight. Doing so, may damage the camera or cause temporary camera

malfunction.

•Use the devices with care. Avoid pressing hard on the camera body.

•For your own safety, avoid using the camera or power off the camera when

there is a storm or lightning.

•Disconnect the power adaptor during long periods between usage.

•Use only the accessories and power adaptors supplied by Uniden.

Ensure the signal reception is acceptable between the camera(s) and the WiFi

router. If necessary, reduce the distance between them to improve overall

system performance. As local internet environments may vary, your device

may indicate that the camera is disconnected or may display a black screen. If

this occurs, refresh the app.

Item Requirement/Recommendation

Internet Bandwidth 1 Mbps upload/download speed

Network Requirement WiFi or 4G (optimize download speed)

Memory Card microSD, CLASS10, up to 32GB

Device Processor 1.5GHz dual core processor or equivalent

WIRELESS DEVICES OPERATING RANGE

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS ........................................................ 2

OVERVIEW ..................................................................................................... 4

WHAT’S IN THE BOX? ................................................................................... 5

GETTING TO KNOW YOUR CAMERA ........................................................... 6

INSTALLING THE BATTERY ......................................................................... 7

INSTALL UNIDEN SOLO APP...................................................................... 7

DEVICE MANAGEMENT............................................................................ 10

PLACING THE CAMERA ............................................................................. 17

QUICK ACCESS ICONS ............................................................................... 19

LIVEVIEW/PLAYBACK ................................................................................ 22

LIVEVIEW ................................................................................................... 22

PLAYBACK ................................................................................................. 24

ADVANCED SETTING .................................................................................. 25

PIR SENSOR SETTING ............................................................................. 25

E-MAIL SETTINGS ..................................................................................... 28

VIDEO QUALITY & ON SCREEN DISPLAY SETTING ............................. 30

DATE AND TIME SETTING ....................................................................... 33

IMPORTANT INFORMATION ..................................................................... 34

SD CARD ................................................................................................... 34

BATTERY ................................................................................................... 35

SPECIFICATION ........................................................................................... 37

WARRANTY .................................................................................................. 38

The App Cam Solo is a full HD, weatherproof smart camera. Completely

wirefree, the app cam is battery powered with advanced power-saving

technology featuring up to 180 days standby time. With quick and easy

installation, the camera can be placed anywhere inside or outside of the

home.

Offering a 130-degree viewing angle, which provides a greater field of vision,

the Guardian App Cam Solo can be fitted to any flat surface with an easy-to

install magnetic base. Also included is an optional screw base for those more

easy-to-reach areas, such as the front door. Cameras can be twisted to an

angle to suit any situation and easily moved around the home without the

need to re-wire or place near a power source, providing complete flexibility

when setting up viewing angles.

The App Cam Solo connects directly to the local Wi-Fi network and features

motion detection recording directly to an SD card. Users can access the App

Cam Solo with a Smart phone or tablet via the free to download Uniden Solo

app, which also provides users remote access to the cameras to check-in from

anywhere in the world. With optional app push notifications when motion or

sound is detected, users can be reassured the home is safe while at work or

on holiday.

Users can connect as many cameras as they wish in areas such as, the

driveway, garage, front and back entrances and upstairs. The camera can

even be used to check on pets or babies while in other areas of the house.

The camera features PIR motion sensor, which detects movement and will

send notifications to the user via the app. Users have the ability to two-way

talk in real time through the camera, for easy communication with visitors

including couriers, while also acting as a deterrent to unwanted guests.

The flexible, innovative Uniden App Cam Solo camera provides peace of mind

at home or while away.

OVERVIEW

WHAT’S IN THE BOX?

Twin Pack includes 2 single packs of AppCam Solo.

Quad Pack includes 4 single packs of AppCam Solo.

CR123A

AppCam Solo Camera

Reset Needle

Flat Mount

Screw Mount

CR 123A Batteries

Screws (in pack)

Stick

If any item is missing or damaged, contact your place of purchase

immediately.

Never use damaged products!

Need Help? Get answers at our website:

www.uniden.com.au for Australian model

GETTING TO KNOW YOUR CAMERA

Micro SD Card Slot

Reset Button

Daylight Sensor

Lens

Status LED

Built-in Mic

Speaker

Flat Mount

Working Mode

App Cam Solo has two working modes:

Standby Status: The camera is in the power-saving mode; there is no live

view or motion recording.

Working Status : The camera is running at full capacity. It enters the working

status when someone is accessing the camera via Uniden Solo App or the

PIR motion sensor detects a movement.

LED Status

Color Mea

Colour Connection Status

Red WiFi Connection failed Blinking: Standby

On: Working

Blue WiFi Connection is successful Blinking: Standby

On: Working

Note: LED will flash every 20 seconds when the camera is in Standby status.

Appearance

Built-in PIR Motion Sensor

INSTALLING THE BATTERY

CR123A

Step 1 Step 2 Step 2

Please use the stick to

press the white button,

and then rotate to sepa-

rate the backing casing

from the camera.

Insert four batteries

into the battery slot.

Close the back cas-

ing. Please press

both end of the cas-

ing to make it close

rmly for good weath-

erproof performance.

Insert the Batteries into the Camera

Install Uniden Solo App

System Requirement

Uniden Solo App will run on both the Android and iOS devices.

System Requirement:

iOS devices: iOS 8.0 or higher.

Android devices: Android 3.0 or higher.

Install the App

1. Search “Uniden Solo” in App Store or Google Play, download and install the

app.

2. After successfully installed it, tap the icon to launch the Uniden Solo App.

INSTALLING THE UNIDEN SOLO APP

User Interface

: More Option , tap this icon to show more configuration icons.

: Help , tap to read the tips regarding camera usage and installation.

: Share the QR code, tap this icon to get the QR code/UID of the camera.

: Edit Device , tap this icon to edit the login parameters of the camera.

: Delete , tap this icon to delete the camera from the device list.

: Battery Status , tap this icon to enter the battery usage page.

/ : Push Notification, tap this icon to enable or disable Push Notification.

/ : PIR Motion Sensor, tap the button to enable or disable the PIR.

: Wi-Fi Settings, tap this icon to enter the WiFi settings page.

: Device Settings , tap this icon to enter the setup menu of the camera.

: Play , tap this icon to enter the live view page to view the video stream.

: Settings , tap this icon to enter the settings page of the App.

Device Management

This part will introduce how to add new device, modify the device information

and modify device login password etc.

Add New Device

You can add the camera by scanning QR code (on camera’s back) or

manually entering camera UID (below QR code).

1. Tap to start.

2. Option 1: Scan the QR Code

Scan the QR code on the back of camera to continue.

Note: In the dark environment, please turn on the flashlight on your phone by

tapping .

Inhaltsverzeichnis

Andere Uniden Sicherheitskamera Handbücher

Uniden

Uniden LightCam 40HD Bedienungsanleitung

Uniden

Uniden AppCam 50HD Bedienungsanleitung

Uniden

Uniden SOLO+ Bedienungsanleitung

Uniden

Uniden GC43 Bedienungsanleitung

Uniden

Uniden AppCam 4OPT Bedienungsanleitung

Uniden

Uniden G101 Bedienungsanleitung

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden UDR744 Bedienungsanleitung

Uniden

Uniden App Cam Spotlight Bedienungsanleitung

Uniden

Uniden Guardian GC45 Bedienungsanleitung

Uniden

Uniden Guardian GC45 Service-Handbuch

Uniden

Uniden UDRC58HD Bedienungsanleitung

Uniden

Uniden APPCAM PAN/TILT Bedienungsanleitung

Uniden

Uniden App Cam Spotlight+ Bedienungsanleitung

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden UDR444 Bedienungsanleitung

Uniden

Uniden APPCAM23 Bedienungsanleitung

Uniden

Uniden AppCam 25HD Bedienungsanleitung

Uniden

Uniden NVR - 8 Bedienungsanleitung

Uniden

Uniden UDW10055 Benutzerhandbuch

Uniden

Uniden APPCAM23 Service-Handbuch

Uniden

Uniden Guardian G710PTZC Bedienungsanleitung

Uniden

Uniden UWS1100 Bedienungsanleitung

Uniden

Uniden UDWC25 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung