Uniden GC43 Bedienungsanleitung
GC43 ACCESSORY CAMERA
USER’S MANUAL
WHAT’S IN THE BOX
GC43 video camera
AC adapter
Three Wall Anchors
and screws
(Not Shown)
If any items are missing or damaged, contact our Customer Care Line
immediately. Never use damaged products!
Need Help? Get answers 24/7 at our website: www.uniden.com.
If You... Contact Uniden’s... Phone Number
have a question or problem Customer Care
Line*
817-858-2900 or
800-658-8068
need a replacement part or accessory Parts Department* 800-554-3988
need special help due to a disability Accessibility Help
Line
800-874-9314
(voice or TTY)
* During regular business hours, Central Standard Time. Visit our website for detailed
business hours.
Important Safety Instructions!
This manual contains important information about this product’s operation. If
you are installing this product for others, you must leave this manual or a copy
with the end user.
When using your equipment, always follow basic safety precautions to reduce the risk of
re, electric shock and injury to persons, including the following:
•This equipment is NOT waterproof.
•DO NOT immerse any part of the product in water. Do not use this product near water,
e.g., near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near
a swimming pool.
•To avoid any risk of electric shock from lightning, avoid handling any electronic
devices (except battery powered ones) during an electrical storm.
•Use only the power cord and/or batteries indicated in this manual. Never dispose of
any batteries in a re: they may explode. Check with local codes for possible special
disposal instructions.
•Never tug or pull on any power cord: be sure to leave some slack in the cord when
placing your equipment, and always use the plug to unplug cord from the wall outlet.
•Never leave power cords where they can become crushed, cut, or frayed; when
running power cords, avoid letting them rub against any sharp edges or lie across any
high trac areas where people might trip over them.
•Do not use the device if the adapter cords or plugs have been damaged, the unit has
been exposed to liquids, or the unit has been dropped or is damaged.
Warnings to Parents and Other Users
Failure to follow these warnings and the assembly instructions could result in serious
injury or death. This product is not designed or intended for use as a medical monitor,
nor should this product be used as a substitution for medial or parental supervision.
Always be sure that both the transmitter and receiver are working properly and are
within range of each other.
•STRANGULATION HAZARD. Keep the adapter cords out of the reach of children.
•WARNING: KEEP OUT OF THE REACH OF CHILDREN. This product is not a toy and is not
intended for use by any children under the age of 13. If you are between the ages of
13 and 18, review these terms, conditions and safety warnings with your parents or
guardian to make sure that you and your parent or guardian understand these terms,
conditions, and safety warnings.
•Allow for proper ventilation when units are in use. Do not cover the camera or receiver
with any object such as a blanket. Do not place it in a drawer or in any location which
would mue the sound or interfere with the normal ow of air.
SAVE THESE INSTRUCTIONS!
For best results:
To avoid damage to your equipment, follow these simple precautions:
•Do not drop, puncture or disassemble any part of the equipment. There are no user-
serviceable parts inside.
•Do not expose the equipment to high temperatures; avoid leaving the equipment in
direct sunlight for more than a few minutes. Heat can damage the case or electrical
parts.
•Do not place heavy items on top of the equipment or expose the equipment to heavy
pressure.
•Remove the power adapter during long periods between usages.
•Clean only with a dry cloth.
Failure to follow the instructions in this operating manual will void the warranty.
Uniden assumes no liability for damages to property or injury to persons caused
by improper handling or failure to comply with these safety instructions.
4
GETTING TO KNOW THE CAMERA
CAMERA CONTROLS AND INDICATORS
LINK
POWER
Camera lens
Light sensor
Antenna (flip up)
Antenna (flip up)
Swivel stand receiver
AC adapter
power jack
LINK
POWER LED
LINK LED
CHARGE LED
Microphone
CONTENTS
Important Safety
Instructions! .......................2
Warnings to Parents and
Other Users ................... 2
For best results: .................... 3
Getting to know the camera .4
Camera Controls and
Indicators ................................. 4
What the lights mean ............. 5
Mount the Camera Stand ......5
General Guidelines .................. 5
Placement Considerations ... 6
Mount the stand....................... 6
Attach the camera ................... 7
Connect to power .................... 7
Pairing Cameras .....................8
Some things to know about
pairing cameras ..................... 8
Pair Camera ................................ 8
Troubleshooting camera
Pairing ....................................... 9
Additional Information .......10
Product Specications .........10
Lithium-Polymer Battery
Warning ............................11
Recycling and Disposal
Information ......................12
FCC Compliance Information 12
Part 15 Compliance
Statement .....................12
RF Exposure Information 13
IC Compliance Information .13
Radio Equipment Notice 13
CE Compliance Information 13
One-year Limited Warranty 14
5
WHAT THE LIGHTS MEAN
Light State What it means
Power
status
On
(Blue) The camera is on.
Off The camera is off.
Link
status
Flashing The camera is in pairing mode.
On
(Amber) The camera is connected to the receiver.
Off The camera is in standby.
Charge
status
On
(Green) The battery is charging.
Off The battery has charged.
MOUNT THE CAMERA STAND
GENERAL GUIDELINES
The Uniden Guardian GC43 camera not weatherproof.
Also, as dust, grime, and cobwebs accumulate on the camera glass, they can
reflect light from the infrared LED and might lower video quality. Periodically
clean the lens glass with a soft cloth.
PLACEMENT CONSIDERATIONS
Consider the following when placing cameras:
•The clearest line-of-sight between the camera and monitor is best.
6
— Walls, especially brick and concrete, shorten the transmission distance.
•Optimized motion detection range is 6 - 12 feet for the GC43 camera. The
farther away an object is, the less accurate the motion detection.
•Avoid having a direct light source in the view of the camera, including street
lights, ceiling or floor lamps, etc.
MOUNT THE STAND
You can mount the camera with the stand on the bottom (on a wall or table-
top) or on the ceiling (the camera mount swivels 360°). When positioning the
camera, you might want to bring the receiver along; it’s much easier to get the
camera into the right position when you have the display handy.
1. Hold the base of the camera stand where you want to mount it and mark
the location of the screw holes.
2. Use the included screws and anchors to attach the base to the wall or
ceiling.
7
ATTACH THE CAMERA
Slide the camera on to the stand swivel mount until it clicks in place.
CONNECT TO POWER
1. Connect one end of an AC adapter
to the camera’s power pigtail and
plug the other end into a 120 volt
AC (standard indoor) power outlet.
2. Make sure the
Power status
light
turns on. If it doesn’t,
try reconnecting the AC
adapter, and make sure
the power outlet isn’t
controlled by a wall switch.
AC adapter
power plug
LINK
8
PAIRING CAMERAS
SOME THINGS TO KNOW ABOUT PAIRING CAMERAS
•If a camera is already assigned to the selected channel, the receiver
overwrites that camera link with the new one.
•Only pair one camera at a time! The receiver links to the first camera it
detects. If two or more cameras are in pairing mode, you can’t control which
camera the receiver will detect first.
PAIR CAMERA
1. From the Pairing Camera screen (refer to the G455/G755 Owner’s Manual),
tap the camera image you want to pair. A processing icon displays for a 60
second countdown.
2. During the 60 second countdown, quickly press and release
LINK
on the
camera (see “Camera Controls and Indicators” on page 4 and refer to the
G455/G755 Owner’s Manual).
3. The system automatically adjusts the Camera On screen accordingly.
If you have any trouble, consult the table on page 9.
Use this Pairing Camera procedure to move a camera from one channel
to a different channel.
9
TROUBLESHOOTING CAMERA PAIRING
Consult the following table for camera pairing troubleshooting suggestions:
If... Try...
the camera’s signal
status icon shows no
bars
• making sure the camera is plugged in and the green
LED is on.
• making sure that the camera’s antenna is swiveled
up in position and the receiver’s antenna is
extended.
• making sure the camera is paired to the correct
channel
• re-pairing the camera and receiver
the camera’s signal
status icon shows
one or two bars or the
video quality is poor
See “General Guidelines” on page 5 for tips on
improving video quality.
the camera won’t pair
with the receiver
• making sure the camera is plugged in and the green
LED is on.
• pressing and releasing the pairing button quickly. Do
not press and hold
LINk
.
10
ADDITIONAL INFORMATION
PRODUCT SPECIFICATIONS
Radio Frequency Transceiver
RF Frequency 2.4 GHz
Modulation GFSK
Spread spectrum Frequency Hopping
Anti Interference Clean Channel Dynamic Select
Selectable camera channel 4
Data rate 2 Mbps
Transmitting range 500 feet (152 meters) in an open area (line of
sight)
Image Specification
Output Image resolution 480 X 272/ 320 x 240 (QVGA)
Image processing H.264
Exposure Auto
White balance Auto
Camera Specifications
Weight 4.1 oz (118 g)
Dimension 3.5 x 2.9 x 0.8” (90 x 49 x 20 mm)
Operating temperature +14° F (-10° C) to 122° F ( +50° C)
Battery charging temp. 0° C (32° F) to +45° C (113° F )
Input voltage 100-240 V AC @ 60 or 50 Hz
Operating voltage 5 V DC @ 1 Amp
Power consumption 650 mA max
Low light solution 12 IR LEDs, 1 Low light sensor
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Uniden Sicherheitskamera Handbücher
Uniden
Uniden App Cam Spotlight+ Bedienungsanleitung
Uniden
Uniden App Cam Solo+ Bedienungsanleitung
Uniden
Uniden App Cam Solo Pro Series Bedienungsanleitung
Uniden
Uniden App Cam Solo PT Bedienungsanleitung
Uniden
Uniden APPCAM PAN/TILT Bedienungsanleitung
Uniden
Uniden AppCam 50HD Bedienungsanleitung
Uniden
Uniden UDR744 Bedienungsanleitung
Uniden
Uniden Guardian GC45 Bedienungsanleitung
Uniden
Uniden UDS655 Bedienungsanleitung
Uniden
Uniden Pro710NPTZC Bedienungsanleitung
Uniden
Uniden App Cam 4K Bullet-S Bedienungsanleitung
Uniden
Uniden App Cam Floodlight Bedienungsanleitung
Uniden
Uniden APPCAM23 Bedienungsanleitung
Uniden
Uniden APP CAM 25 HDA Bedienungsanleitung
Uniden
Uniden UDRC58HD Bedienungsanleitung
Uniden
Uniden UDR444 Bedienungsanleitung
Uniden
Uniden AppCam Solo 2 Bedienungsanleitung
Uniden
Uniden Guardian G710PTZC Bedienungsanleitung
Uniden
Uniden Guardian App Cam Solo Bedienungsanleitung
Uniden
Uniden LightCam 40HD Bedienungsanleitung
