Uniden X66 Bedienungsanleitung
For more exciting new products please visit our website:
Australia: www.uniden.com.au
X66
Remote Speaker MIC
UHF CB Transceiver
Introduction 3
Controls & Connectors 4
Indicators 6
Included with your X66 Transceiver 7
Connecting the Microphone 8
Mounting the MIC Hanger 9
Operation 12
Turning on the Power 12
Setting the Auto Squelch 13
Monitor 14
Selecting a Channel 14
Programming the Instant Priority Channel 15
Recalling the Instant Channel 15
Transmitting 15
Call Function 15
DUAL Watch 16
Using Repeater Channels 16
Operating the UHF CB Radio in Duplex Mode 17
Scanning 18
Open Scan (OS) Mode 19
Group Scan (GS) Mode 20
Master Scan (MS) Mode 21
Priority Watch 24
Add/Remove Channels from SCAN Memory 24
Selecting the Call tone 25
Busy Channel Lockout 25
Roger Beep 26
CTCSS (Continuous Tone Coded Squelch System) 26
DCS (Digital Coded Squelch) 27
Beep On/Off 27
Backlight 27
LCD Contrast 28
LCD & Key Backlight Colour 28
LCD & Key Backlight Dimmer 29
CTCSS Codes Table 29
DCS Codes Table 30
UHF CB Channel Guidelines 31
UHF CB Channels & Frequencies 32
Warranty 34
2
Contents
UNIDEN X66 UHF CB Transceiver
The Uniden X66 is designed to provide you with years of trouble
free service. Its rugged components and materials are capable of
withstanding harsh environments. Please read this Operating Manual
carefully to ensure you gain the optimum performance of the unit.
NOTE
The citizen band radio service is licenced in Australia by
ACMA Radio-communications (Citizen Band Radio Stations)
Class Licence and in New Zealand by MBIE General User
Licence for Citizen Band Radio and operation is subject to
conditions contained in those licenses.
Features
• Narrow Band (NB) 80 Channel
Radio*
• Mini Compact Black Box
• Remote LCD Speaker
Microphone (Remote SPK/MIC)
and Extension Cable
• 12V DC Power Input
• Built-in AVS Circuitry†
• Transmission Power 5W
• LCD Display with Backlight
• LCD Backlight brightness control
(“HI”, “LO”, “Off”)
• Signal Strength/ Power Meter
• Instant Channel Programming
• One touch Instant Channel recalling
• Dual Watch with Instant Channel
• Duplex Capability*
• Master Scan
• Group Scan and Priority Channel
Watch
• Open Scan
• Scan Channel Memory On/Off
separately with Open Scan,
Group Scan
• Channel Select
• Busy Channel Lock-out Function
• Roger Beep Function On/Off
• 5 Different Call Tones
• 38 Built-in CTCSS (Continuous
Tone Coded Squelch System)
and 104 additional DCS (Digital
Coded Squelch) codes that are
user selectable
• Volume Control
• 7 LCD & Key Backlight Colours
• Base Speaker
• External Speaker Jack
• Power On/Off Push Switch
• Front MIC Jack
• Auto Squelch
• Under and over voltage alert
function
* Refer to p.31 - p.33 for channel
information
†AVS - Automatic Volume Stabilizer
detects and manages incoming
audio to comparable levels.
3
Introduction
UHF CB TransceiverUNIDEN X66
4
Controls & Connectors
3
4
5
2
UNIDEN X66
1
UHF CB Transceiver
23
24
6
8
9
10
11
12
13
14
16
17
18
19
20
21
22
15
7
X66
5
Controls & Connectors
UNIDEN X66 UHF CB Transceiver
1MIC Jack
2Speaker
3Power Input Connection
(13.8VDC)
4EXT SP - External Speaker
Jack
5UHF Antenna Connection
6CALL - Call Tone Button
7INST - Instant Channel Button
8PTT - Push To Talk Button
9MENU - Menu Button
/ENTER - Enter Button
10 DIMMER (press & hold)
11 POWER - Power Button
12 SCAN - Scan Button
/ OS/GS - Open Scan/
Group Scan
- Move selection left
13 MICROPHONE
14 SPEAKER
15 Liquid Crystal Display (LCD)
16 VOL - Volume Up Button
17 VOL - Volume Down
Button
18 SQL - Auto Squelch
/MON - Monitor Button
19 COLOUR (press & hold)
20 MEM - Memory Scan
Channel
21 DCS/CTCSS - DCS &
CTCSS Button
/DUAL - Dual Watch Button
- Move selection right
22 / - Select Up and
Down Buttons
23 RJ45 type plug
24 Front MIC Jack Cover
Base (Front & Rear)
Remote LCD Speaker MIC
6
Indicators
UNIDEN X66
1TX/BUSY - Transmit/Busy
2CALL - Call Tone
3M- Channel in Memory
4Channel Number
5DCS/CTCSS - DCS/CTCSS
selected
6MON/SQT - Flashing:
Monitor/Tight Squelch
7INST - Instant Channel
8DUAL - Dual Watch
9SCAN - Scan mode
10 Signal Power Level
11 GS - Group Scan
12 S/RF- Receive Signal or
Transmit
13 PRI - Priority Channel Watch
14 Channel Frequency
15 BCL - Busy Channel Lockout
16 DCS/CTCSS Code Number
16
13 14
1 2 3 4 5
15
6
7
8
9
10
11
12
UHF CB Transceiver
Optional Accessories:
• UHF Antenna
• External Speaker
Visit the X66 page on the website for more information on the
availability of optional accessories;
www.uniden.com.au for Australia
7
Included in your X66 Transceiver
UNIDEN X66
Remote LCD Speaker
Microphone
(RM800)
Owner’s Manual Microphone Hanger
with screws, washers
Mounting Bracket with
mounting screws
DC Power Cord
with fuse
Extension Cable
(EC770)
X66
Remote Speaker MIC
UHF CB Transceiver
For more exciting new products please visit our website:
Australia: www.uniden.com.au
UHF CB Transceiver
MIC Jack
Before connecting the Microphone Jack decide if you need to use the 2
metre Extension Cable - simply connect the MIC plug into the jack end of
the Extension Cable.
Push the MIC plug or Extension Cable plug into the MIC jack of the radio
until the connection locks into place. Gently tug the MIC or Extension
Cable cord to test that the connection is locked. Use the rubber cover
which is on the cord to seal the MIC jack entry from dust.
Disconnecting the MIC from the MIC Jack
Pull back the rubber cover and move it down along the cord. Using the
ÀDWEODGHRIDVFUHZGULYHURUVLPLODUREMHFWFDUHIXOO\SXVKWKHORFNWDERI
the MIC plug towards the MIC cord and at the same time tug on the MIC
cord to draw back the MIC plug.
8
Connecting the Microphone
UNIDEN X66 UHF CB Transceiver
The Microphone Hanger comes in two parts. How and where you mount
the MIC hanger will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the MIC Hanger only.
Locate a suitable mounting position and mark and drill two 3mm holes.
Fix the MIC Hanger into place with screws.
9
Mounting the MIC Hanger
UNIDEN X66 UHF CB Transceiver
10
UNIDEN X66
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the MIC Hanger using the supplied
binding screws.
Locate a suitable mounting position.
$SSO\KLJKTXDOLW\'RXEOH6LGHGWDSHRQWRWKHÀDWDUHDRIWKH0,&
+DQJHUEDFNSLHFHDQGWKHQSUHVV¿UPO\WRWKHPRXQWLQJSRVLWLRQ
Mounting the MIC Hanger
MIC Hanger mounted over MIC Cable
NOTE
The curly cord of the Remote SPK/MIC can extend up to
1.5m. For practical installation of the MIC Hanger mounted
over MIC Cable use this method with the Extension Cable.
UHF CB Transceiver
Inhaltsverzeichnis
Andere Uniden Transceiver Handbücher
Uniden
Uniden UH036SX-2NB Bedienungsanleitung
Uniden
Uniden UH037SX-2NB Bedienungsanleitung
Uniden
Uniden UH9000 Bedienungsanleitung
Uniden
Uniden 2020 Bedienungsanleitung
Uniden
Uniden UH850S Bedienungsanleitung
Uniden
Uniden UH8055S Bedienungsanleitung
Uniden
Uniden 2020 Bedienungsanleitung
Uniden
Uniden UH9050 Bedienungsanleitung
Uniden
Uniden UH7700NB Bedienungsanleitung
Uniden
Uniden UH001 Bedienungsanleitung
Uniden
Uniden UH078SX-NB Bedienungsanleitung
Uniden
Uniden UH35 Series Bedienungsanleitung
Uniden
Uniden UH078SX-NB Bedienungsanleitung
Uniden
Uniden GRANT XL Bedienungsanleitung
Uniden
Uniden Jackson UT-547C Bedienungsanleitung
Uniden
Uniden UH5040 Bedienungsanleitung
Uniden
Uniden UH810S Bedienungsanleitung
Uniden
Uniden Cell Phone Bedienungsanleitung
Uniden
Uniden UH810S-2 Bedienungsanleitung
Uniden
Uniden BearCat PC78XL+ Bedienungsanleitung
