Unitech MS140 Bedienungsanleitung

Overview

This slot reader supports PC/AT, XT, notebooks and Macintosh computers.

It can read most popular bar codes like Code 39, UPC/EAN, Interleaved 2 of

5, Standard 2 of 5, Code 128, Codabar, MSI, Code 11, Code 93, etc.

Setup of the reader can be done in two ways:

•Through keyboard of a desktop PC/AT machine.

•Or use custom labels (batch setup).

Installation:

The picture below shows how to connect the reader to a computer. Follow the

procedures for installation:

1. Turn off computer power.

2. Unplug keyboard from computer. Plug the reader to computer’s

keyboard port and keyboard to the reader.

3. Turn on power. One long beep from the reader indicates successful

power-up.

MS140

The default device ID of the reader is set to PC/AT. If your computer is not a

PC/AT, please do the setup on a PC/AT machine first to select a correct device

ID. The device ID “06” (Keyboardless) is for notebook computers.

Setup

The reader’s behavior can be changed through a setup routine in the reader.

Setup can only be performed on a PC/AT computer under DOS

environment. After typing “COPY CON NUL” command under DOS

prompt, there are two ways to enter setup:

•Swipe “Enter Setup” bar code label located on the cover page of this

manual.

•Or press left SHIFT and right SHIFT keys at the same time within about

20 keystrokes after computer power up.

The second method applies when the reader has device ID set to PC/AT

interface already. If you have this manual handy, the first method is preferred.

When the reader enters the setup mode, a selection menu will be displayed on

the screen like,

Use numerical keys on the top of alphabetic keys for digit input.

0-Device 1-Scanner 2-Bar Code 3-Other

4-Default 5-Dump Setting 6-Exit

Selectè

Follow the prompting and make your selections accordingly. The setup

procedure is just that easy.

Batch Setup

Having configured a reader, you may duplicate the settings of the reader

(master) to the others. You can do this by producing a set of custom setup

labels derived from the master reader and scanning these labels by other

readers. When selecting Dump command in setup mode, the settings of the

reader will dump to the screen as one or several ASCII string(s). Printing the

string(s) into bar code labels in Code 39, you get the batch setup labels to

duplicate other readers.

Selectable Parameters and their Defaults

Parameters Selections Default

Device ID IBM PC/XT;

IBM PC/AT, PS/2 mod 40, 60, 80 etc

IBM PS/2 MOD 25, 56, 70, 90

Macintosh ADB bus

Wand Emulation (Native Mode)

Keyboardless Wedge

Wand Emulation (Code 39 Mode)

IBM PC/AT

Beep Tone None/Low/Medium/High/Low to High/

High to Low Medium

Inter-char delay 1 ms /5 ms/10 ms/20 ms/50 ms/100 ms 1 ms

Inter-block delay 10 ms/50 ms/100 ms/1 s/5 s 10 ms

Function Code On/Off On

CapsLock Auto_trace/Low case/Upper case Auto_trace

Language US/UK/Swiss/Swedish/Spanish/

Norwegian/Italian/German/French/

Alt Key Mode

Double verification Off/On Off

Label Type Positive /Positive and Negative Positive

Output of Wand Bar high, space low/

Bar high,

Bar low, space high space low

Level Duration 200 us/600 us 200 us

Terminator Enter/Field Exit/ Return/ None Enter

Code ID None/ User Defined/ Default Set I/

Default Set II None

Define Code ID 00-Code 39 Full ASCII

01-Code 39 Standard

02-EAN-13

03-UPC-A

04-EAN-8

05-UPC-E

06-I 2 of 5

07-Codabar

08-Code128

09-Code 93

10-S 2 of 5

11-MSI

12-Code 11

13-Code 32

14-Dalta Code

15-Label Code

16-Plessey Code

18-Toshiba Code

Data Length Exclude/ Include Exclude

Preamble Define up to 16 characters None

Postamble Define up to 16 characters None

Code 39 Disable/Enable Enable

Full ASCII/Standard Standard

Check Digit Check and Send/ Check but

Not Send/ Not Check Not Check

Send/Not Send Start & Stop Not Send

Min 0 / Max 48 0 / 48

Code 32 Disable/Enable Disable

Leading Character Send / No Send Send

Tailing Character Send /No Send Send

Interleaved 2 of 5

Disable/Enable Enable

Fix Length On/Off (by first three reads) On

Check Digit Check and Send/ Check but

Not Send/ Not Check Not Check

First Digit Suppressed/ Last Digit Not

Suppressed/ Not Suppressed. Not

Suppressed

Min 4 / Max 64 10 / 64

Standard 2 of 5 /

Disable/Enable Disable

Toshiba Fix Length On/Off On

Check Digit Check and Send/ Check but

Not Send/ Not Check Not Check

Min 1 / Max 48 8/48

Delta distance Disable/Enable Disable

code Check Digit Not Send / Send Not Send

Check Digit Check/Not Check Not Check

Code 128 / Disable/Enable Enable

Label Code Min 1 / Max 48 1 / 48

MSI / Plessey Disable/Enable Disable

Code CD Send / No Send No Send

CD Double Module 10/ CD Double

Module 11 Plus 10/CD single Module 10 CD Double

Module 10

Min 1 / Max 16 1 / 16

Code 93 Disable/Enable Enable

Min 1 / Max 48 1 / 48

Code 11 Disable/Enable Disable

One/Two CD Two CD

CD Send / No Send No Send

Min 1 / Max 48 1 / 48

UPC-ADisable/Enable Enable

Leading Digit Send / No Send Send

CD Send / No Send Send

UPC-EDisable/Enable Enable

Leading Digit Send / No Send Send

CD Send / No Send Send

Zero Expansion On / Off Off

EAN-13 Disable/Enable Enable

Leading Digit Send / No Send Send

CD Send / No Send Send

Bookland EAN Enable / Disable Disable

EAN-8Disable/Enable Enable

Leading Digit Send / No Send Send

CD Send / No Send Send

Supplement Code

2 Add-on Code Off / On Off

5 Add-on Code Off / On Off

Transmitted if Present/ Must Present

Must Present

Space Added / Not Added Not Added

Andere Handbücher für MS140

Inhaltsverzeichnis

Andere Unitech Scanner Handbücher

Unitech

Unitech MS626 Bedienungsanleitung

Unitech

Unitech MS852DPM ESD Bedienungsanleitung

Unitech

Unitech MS840P Bedienungsanleitung

Unitech

Unitech MS810 Installations- und Betriebshandbuch

Unitech

Unitech MS180 Bedienungsanleitung

Unitech

Unitech MS912 Bedienungsanleitung

Unitech

Unitech MS842DPM Bedienungsanleitung

Unitech

Unitech MS912 Bedienungsanleitung

Unitech

Unitech MS380 Bedienungsanleitung

Unitech

Unitech ES922 Bedienungsanleitung

Unitech

Unitech MS912 Bedienungsanleitung

Unitech

Unitech MS926 Bedienungsanleitung

Unitech

Unitech Hamster Bedienungsanleitung

Unitech

Unitech MS810 Installations- und Betriebshandbuch

Unitech

Unitech MS837 Bedienungsanleitung

Unitech

Unitech RP901 Bedienungsanleitung

Unitech

Unitech PS306 Bedienungsanleitung

Unitech

Unitech MR550 Bedienungsanleitung

Unitech

Unitech MS916 Bedienungsanleitung

Unitech

Unitech MS832 Bedienungsanleitung

Unitech

Unitech PT-500 Bedienungsanleitung

Unitech

Unitech MS916 Bedienungsanleitung

Unitech

Unitech MS920 Bedienungsanleitung

Unitech

Unitech MS852P Bedienungsanleitung

Beliebte Scanner Handbücher anderer Marken

Plustek

Plustek Scanner Bedienungsanleitung

Z/I Imaging

Z/I Imaging PhotoScan 2001 Bedienungsanleitung

Renkforce

Renkforce DS100-5M Bedienungsanleitung

Image Access

Image Access WideTEK A2 Bedienungsanleitung

Canon

Canon imageFORMULA CR-120N Bedienungsanleitung

Fujitsu

Fujitsu FI-4860C2 Bedienungsanleitung

GeoSlam

GeoSlam ZEB Horizon Montageanleitung

Kodak

Kodak i5800 Scanner Bedienungsanleitung

Kodak

Kodak i7300 Bedienungsanleitung

Revopoint

Revopoint POP Bedienungsanleitung

Fujitsu

Fujitsu fi-4860C Bedienungsanleitung

Eddyfi Technologies

Eddyfi Technologies Floormap X Bedienungsanleitung

Faselase

Faselase F6 Bedienungsanleitung

Fujitsu

Fujitsu CardMinder Bedienungsanleitung

Uniden

Uniden BC340CRS Bedienungsanleitung

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Bedienungsanleitung

Mustek

Mustek PageExpress 4800 Pro Bedienungsanleitung

Optex

Optex 750830 Bedienungsanleitung