US Robotics SureConnect U.S. Robotics SureConnect ADSL Ethernet/USB... Bedienungsanleitung

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

Contents:

US Robotics

SureConnect ADSL

Ethernet/USB Router

Configuration Utility

Summary

Web User Interface

Terminal User Interface

Command Line Interface

Configuration Examples

Installation

Uninstallation

Troubleshooting

Glossary

Regulatory Information

U.S. Robotics SureConnect™ADSL

Ethernet/USB Router User Guide

Windows 95, 98, NT 4.0, Me, 2000, XP or later, Mac

and Linux

Installing the Router

Welcome to the Web page for your U.S. Robotics SureConnect™ADSL

Ethernet/USB Router, Model 9003. This Web page details five aspects

of your router...

●Installation & Uninstallation: Complete instructions on how to

set up your router.

●Configuring the Modem: Command-level discussion of all three

user interfaces, with examples.

●Troubleshooting: Q&A format. Covers typical questions.

●Glossary: ADSL jargon, rendered into English.

●Regulatory Information:. Declaration of Conformity, FCC & CE

compliance statement, etc.

Technical Support

For current product support and contact information, go to the Support section of the U.S.

Robotics Web site:

http://www.usr.com/broadbandsupport

U.S. Robotics

part number

R46.0216.00

file:///P|/T_WRITER/Documentation/Released/9003...de/9003%20(Guiness)%20prac%20template/index.htm (1 of 2) [11/6/2002 8:52:17 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

file:///P|/T_WRITER/Documentation/Released/9003...de/9003%20(Guiness)%20prac%20template/index.htm (2 of 2) [11/6/2002 8:52:17 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

Contents:

US Robotics

SureConnect ADSL

Ethernet/USB Router

Configuration Utility

Summary

Web User Interface

Quick Setup

Service Provider

Settings

Network

Firewall

Tools

Statistics

Terminal User Interface

Command Line

Interface

Configuration Examples

Installation

Uninstallation

Troubleshooting

Glossary

Regulatory Information

U.S. Robotics SureConnect™ADSL

Ethernet/USB Router User Guide

Windows 95, 98, NT 4.0, Me, 2000, XP or later, Mac

and Linux

Web User Interface

Overview

The Web User Interface (WUI) is one of three router user interfaces. The other interfaces

are the Terminal User Interface (TUI) and Command Line Interface (CLI). Each interface

allows you to set up, modify, and view router configuration variables and operational data.

The Web User Interface is a system of graphical menus. Menu pages control router

parameters and provide information about them. The WUI organizes these router

parameters into six topics. Here are the six topics, in the order that the WUI displays them...

•Quick Setup •Firewall Settings

•Service Provider

Settings •Tools

•Network Settings •Statistics

This part of the manual discusses all but the Quick Setup topic. You’ll find information on

using the Quick Setup feature in the Quick Installation Guide.

This manual begins topic discussions with a picture of the top-level menu screen. A

description of screen terms and procedures follows each screen shot. Either text or a table

defines screen variables. Afterward, summarized, step-by-step procedures often follow.

Selecting Topics. When you look at a menu page, notice the divider tabs at the very top of

the page. You can access any of the six router configuration and information topics by

clicking on its tab. The graphic below portrays the six divider tabs as they appear on a

menu.

Divider Tabs •

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (1 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

Configuration Options. Most menus present configuration options and prompt you for a

response. For example, the screen may help you to set up service provider, network or

firewall parameters. Some menus offer additional or more specific options by presenting

lower-level (secondary) screens. The bottom of many screens includes a set of graphical

buttons. Clicking one of the buttons with your mouse determines the disposition of options

on the page. For example…

•Add •Delete

•Modify •Disable

•Configure XXX •Erase

Selecting or Enabling Features. You can select menu options by clicking radio buttons or

checking boxes on the screen. In either case, use your mouse to make selections. Radio

buttons allow you to select only one of several options. Checkboxes allow you to enable

none, one or many features. The graphic below includes examples of both radio buttons

and checkboxes.

Radio Buttons •

Checkboxes •

Accessing the Web User Interface

Your router includes the SureConnect ADSL Web Utility. This Web utility displays after you

complete installation.

To access the Web User Interface, follow these steps…

1. Install your router according to the Quick Installation Guide.

2. Connect the router to the Ethernet or USB port on your PC.

3. Open a Web browser and go to IP address http://192.168.1.1. (Otherwise, go to the

LAN IP designated for the router's management port.)

4. At the prompt, type in your user name and password. The default user name is "root."

The default password is "12345." (Don't type the quotation marks or period.)

Service Provider Setting Page

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (2 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

WAN Setup

Use this menu option to configure an ISP connection. ADSL employs Asynchronous

Transfer Mode (ATM) protocol to send data to the Internet Service Providers. An ATM

circuit uses Permanent Virtual Circuit (PVC) as pathway to identify and route modem data.

The U.S. Robotics Ethernet/USB Router supports multiple PVC connections for multiple

ISPs.

To configure a PVC…

1. Delete any connection that you don’t need.

2. Select the PVC in the Current ATM PVC List.

3. Click Delete.

4. Click the connection type recommended by your ISP. Choose a mode: RFC1483

Bridged, RFC1483 Routed, PPPoE, PPPoA or MER.

• If you chose RFC1483 Bridged mode, follow these steps…

1. Enter VPI / VCI values.

2. Click the radio button for the desired encapsulation mode: LLC/SNAP or VC

Multiplexing.

3. Network Settings: Be sure that options Enable NAPT and Enable DHCP are not

selected.

4. Click Add.

• If you chose RFC1483 Routed mode, follow these steps…

1. Enter the WAN IP Address for your ISP.

2. Enter the WAN Subnet Mask for your ISP.

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (3 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

3. Enter VPI / VCI values.

4. Click the radio button for the desired encapsulation mode: LLC/SNAP or VC

Multiplexing.

5. Network Settings: Be sure that options Enable NAPT and Enable DHCP remain

selected.

6. Click Add.

• If you chose PPPoE mode, follow these steps…

1. Enter Username and Password.

2. Select “Direct” Dialing mode. Only choose “Auto” if you prefer to start and stop

your connection while data is flowing.

3. Enter the IDLE Timeout: This function adjusts the number of minutes of no traffic

before the connection terminates. The idle timeout connection terminates when you

select “Auto” Dialing Mode.

4. Select the Authentication method: Chap or PAP or MS-CHAP.

5. Enter VPI / VCI values.

6. Click the radio button for the desired encapsulation mode: LLC/SNAP or VC

Multiplexing.

7. Network Settings: Be sure that options Enable NAPT and Enable DHCP remain

selected.

8. Click Add.

• If you chose PPPoA mode, follow these steps…

1. Enter Username and Password.

2. Select the Authentication method: Chap or PAP or MS-CHAP.

3. Enter VPI / VCI values.

4. Click the radio button for the desired encapsulation mode: LLC/SNAP or VC

Multiplexing.

5. Network Settings: Be sure that options Enable NAPT and Enable DHCP remain

selected.

6. Click Add.

• If you chose MER mode, follow these steps…

1. Enter the WAN IP Address for your ISP.

2. Enter WAN Subnet Mask for your ISP.

3. Enter VPI / VCI values.

4. Click the radio button for the desired encapsulation mode: LLC/SNAP or VC

Multiplexing.

5. Network Settings: Be sure that options Enable NAPT and Enable DHCP remain

selected.

6. Click Add.

Proceed to the Tools Menu to save your changes.

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (4 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

ADSL Standard

The ADSL Standard menu configures the ADSL protocol. You’ll find four supported

protocols: Multi-mode, T1.413, G.dmt and G.lite. Your ISP determines the protocol to use.

In most cases, Multi-mode should allow a connection to the ISP.

PPPoE Relay

PPPoE Relay protocol supports multiple PPPoE sessions through the router, on a LAN

interface, over an RFC1483 Bridged PVC. The router supports multiple sessions by

maintaining a mapping table. In this table, each entry represents one session. The Client /

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (5 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

Server side MAC address and the Session Id provide the basis for the mapping. Refer to

WAN setup instructions on configuring PPPoE. The PPPoE Relay option requires an ATM

PVC (server) and a LAN interface (client). The client initiates a PPPoE session with the

server via a third-party PPPoE client. Follow these steps…

1. Configure the client and server.

2. Click Enable to start the relay function.

NAPT Bridge

This screen provides the option of enabling or disabling MER PVC. From this screen, you

can also change this PVC’s ATM values. The MER Interface is an RFC1483 Bridged PVC,

terminated in the router with a static public address. The ISP provides the static public

address. This type PVC operates with Network Address Translation (NAT) and DHCP.

These protocols allow the router to serve LAN users with private addresses.

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (6 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

Bridging

You can group router LAN interfaces. Grouping allows forwarding of their Ethernet frames

to an ATM interface. The U.S. Robotics Ethernet/USB Router defaults to bridging on three

ports: ETH1, ETH2 and USB. The router bridges these ports to the atm0 interface or the

first PVC under WAN SETUP.

To change the grouping…

1. Click Erase All.

2. Click Interfaces.Choose the desired LAN Interfaces.

3. Click Apply.

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (7 of 55) [11/6/2002 8:53:37 AM]

U.S. Robotics SureConnect ADSL Ethernet/USB Router User Guide

To bind the LAN Interfaces to an ATM interface, select “Add Bridge.”

1. Select the ATM Interface from the Interface Name drop-down list.

2. Enter the VPI / VCI to which this ATM circuit belongs. Refer to WAN Setup for

information on setting up a bridged PVC.

3. Click Apply.

4. At the List of Bridge Entries, click Enable. This action activates packet forwarding.

Advanced

file:///P|/T_WRITER/Documentation/Released/900...ide/9003%20(Guiness)%20prac%20template/wui.htm (8 of 55) [11/6/2002 8:53:37 AM]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere US Robotics Netzwerk-Router Handbücher

US Robotics

US Robotics USR5430 Bedienungsanleitung

US Robotics

US Robotics USR8200 Bedienungsanleitung

US Robotics

US Robotics USR9114 Bedienungsanleitung

US Robotics

US Robotics Wireless Cable/DSL Router Bedienungsanleitung

US Robotics

US Robotics USR7905 Bedienungsanleitung

US Robotics

US Robotics USR8022 Bedienungsanleitung

US Robotics

US Robotics USR9003 Bedienungsanleitung

US Robotics

US Robotics USR5430 Bedienungsanleitung

US Robotics

US Robotics USR8200 Bedienungsanleitung

US Robotics

US Robotics USR997924 Bedienungsanleitung

US Robotics

US Robotics USR9107 Bedienungsanleitung

US Robotics

US Robotics USR5441 Bedienungsanleitung

US Robotics

US Robotics USR7908 Bedienungsanleitung

US Robotics

US Robotics Wireless MAXg Bridge Bedienungsanleitung

US Robotics

US Robotics USR7908 Bedienungsanleitung

US Robotics

US Robotics USR8011 Bedienungsanleitung

US Robotics

US Robotics USR7908A Bedienungsanleitung

US Robotics

US Robotics USR997924B Bedienungsanleitung

US Robotics

US Robotics USR5454 Bedienungsanleitung

US Robotics

US Robotics USR8022 Bedienungsanleitung

US Robotics

US Robotics SureConnect 9003 Bedienungsanleitung

US Robotics

US Robotics USR8011 Bedienungsanleitung

US Robotics

US Robotics 5430 Bedienungsanleitung

US Robotics

US Robotics USR5416 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise

LevelOne

LevelOne FBR-1416 Bedienungsanleitung