V-tech Go! Go! Cory Carson DJ Train Trax & the Roll... Montageanleitung
DJ Train Trax & the Roll Train™
Parent’s Guide
91-003795-000 US
2
Dancing Platforms
SmartPoint®Location
Mini Cory Mini Chrissy
Spinning Handle
INTRODUCTION
Thank you for purchasing the Go! Go! Cory Carson™DJ Train Trax
& the Roll Train™!
Get ready to dance with Cory, Chrissy and DJ Train Trax! Help Cory
and Chrissy dance on stage or roll DJ Train Trax to light up his rainbow
smoke stack while building motor skills and listening to sounds and
phrases from the show. Wicky-wicky, woo-woo!
DJ’s Parking Spot
Hat Button PlayZoneTM Location
Mixing Table
Turntables
3
INCLUDED IN THIS PACKAGE
Go! Go! Cory Carson™DJ Train Trax & the Roll Train™
• One DJ Train Trax
• One mixing table
• One mini Cory
• One mini Chrissy
• Parent’s guide
NOTE:
This toy is not intended for teething.
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
4
Unlock the Packaging Locks
GETTING STARTED
Battery Removal and Installation
DJ Train Trax
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of DJ Train Trax, use a screwdriver to
loosen the screw and open the battery
cover.
3. Remove old batteries by pulling up on one
end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
5. Replace the battery cover and tighten the screw to secure.
Turn the packaging lock counterclockwise
several times.
Pull out the packaging lock and discard.
Rotate the packaging lock 90 degrees
counterclockwise.
Pull out the packaging lock and discard.
5
Mixing Table
1. Make sure the unit is turned OFF.
2. Locate the green battery cover on
the top of the Mixing Table, use a
screwdriver to loosen the screw and
open the battery cover.
3. Remove old batteries by pulling up on
one end of each battery.
4. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended for
maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc), rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
6
PRODUCT FEATURES
DJ Train Trax
1. On/Off Switch
To turn DJ Train Trax ON, slide the
On/Off Switch to the ON position.
To turn DJ Train Trax OFF, slide
the On/Off Switch to the OFF
position.
2.
Automatic Shut-Off
To preserve battery life, DJ Train Trax will automatically shut
off after approximately 35 seconds without input. The unit can
be turned on again by pressing the Hat Button or pushing DJ
Train Trax quickly.
NOTE:
This product is in Try-Me mode in the packaging. After opening
the package, turn the unit off and on again to proceed with normal
play. If the unit powers down while playing, please install a new set
of batteries.
Mixing Table
1. On/Off Switch
To turn the Mixing Table ON, slide
the On/Off Switch to the ON
position. To turn the Mixing Table
OFF, slide the On/Off Switch to the
OFF position.
7
2.
Automatic Shut-Off
To preserve battery life, the Mixing Table will automatically shut
off after approximately 35 seconds without input. The unit can
be turned on again by putting Mini Cory or Mini Chrissy on
the Mixing Table, twisting the Turntables,turning the Spinning
Handle or placing DJ Train Trax in DJ’s Parking Spot.
NOTE:
This product is in Try-Me mode in the packaging. After opening
the package, remove Mini Cory and Mini Chrissy, place DJ Train
Trax in DJ’s Parking Spot or take out and reinsert the batteries
to proceed with normal play. If the unit powers down while playing,
please install a new set of batteries.
ACTIVITIES
DJ Train Trax
1. Hat Button
Press the Hat Button to hear
fun sounds, songs, phrases and
melodies.The smoke stack will flash
with the sounds.
2. Sounds and Melodies
Push DJ Train Trax to hear fun
sounds. While a melody or song is
playing, continue pushing DJ Train
Trax to add in fun sounds on top of
the melody or song.The smoke stack
will flash with the sounds.
8
Mixing Table
1. PlayZone™Location
Place Mini Cory, Mini Chrissy or
other Go! Go! Cory Carson™ mini
characters on the PlayZone™
Location to trigger fun sounds, short
tunes and phrases.
2. Spinning Handle
When Mini Cory and Mini Chrissy
are on the Dancing Platforms, turn
the Spinning Handle or twist the
Turntables to watch them dance.
Lights will flash with the sounds.
3. DJ’s Parking Spot
Place DJ Train Trax in DJ’s Parking
Spot to press the button and trigger
fun sounds and short tunes. The
lights will flash with the sounds.
4. Turntables
Twist the Turntables on the Dancing
Platforms back and forth to hear
fun sounds, short tunes, phrases
and a song. If a short tune or song
is playing, twist the Turntables back
and forth to add fun sounds on top
of the music.The lights will flash with
the sounds.
9
5. SmartPoint®Location
Place a SmartPoint®character (sold
separately) on the SmartPoint®
Location on the DJ’s Parking
Spot to hear fun phrases and sound
effects.
SONG LYRICS
DJ Train Trax
1. Take me out on the dance stage.
Take me out with the crowd.
Time to get groovy and roll some tunes.
Move those bumpers and shake those tires.
2. He rocks on the dance floor all day long,
Movin’ and a groovin’ and a singing his song.
All the groo-vy cars in Bump-er-ton,
Can’t wait to shake their fenders to their favorite songs.
Keep on chugggin, woo, woo, woo.
Wickey-wicky, woo, woo, woo.
Mixing Table
1. Come on down to the show,
We’ll dance fast and we’ll dance slow,
And the party will go on all day!
10
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2.
Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the unit still does not work, install a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and filling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.
Inhaltsverzeichnis
Andere V-tech Spielzeug Handbücher
V-tech
V-tech Sparklings Mia Montageanleitung
V-tech
V-tech BLUEY JOTBOT Bedienungsanleitung
V-tech
V-tech Alpha-Boat Bedienungsanleitung
V-tech
V-tech Marble Rush Magnetic Magic Bedienungsanleitung
V-tech
V-tech V.Smile Baby Backyardigans Big Backyard... Bedienungsanleitung
V-tech
V-tech Go! Go! Smart Wheels Race & Play Adventure... Montageanleitung
V-tech
V-tech 3-in-1 Tummy Time Roll-a-Pillar Montageanleitung
V-tech
V-tech InnoTab Software - Disney Planes Bedienungsanleitung
V-tech
V-tech Learn & Discover Driver Bedienungsanleitung
V-tech
V-tech Baby Amaze Peek & Learn Doll Bedienungsanleitung
V-tech
V-tech Disney Junior MICKEY MOUSE FUNHOUSE Explore & Learn... Bedienungsanleitung
V-tech
V-tech Sing & Discover Story Piano Bedienungsanleitung
V-tech
V-tech Play & Go Puppy Salon Montageanleitung
V-tech
V-tech Language Lab Laptop Bedienungsanleitung
V-tech
V-tech Kidi Star Karaoke Machine Montageanleitung
V-tech
V-tech Girl Fun PC Bedienungsanleitung
V-tech
V-tech Repair & Race Truck Montageanleitung
V-tech
V-tech Fun Phonics Yellow Taxi Cab Bedienungsanleitung
V-tech
V-tech ZoomiZooz Waterpark Montageanleitung
V-tech
V-tech V.Flash: SpongeBob Squarepants Idea Sponge Bedienungsanleitung
