V-tech Grow & Discover Tree House Bedienungsanleitung
91-002863-000
© 2013 VTech
Printed in China
User’s Manual
US
Grow & Discover Tree HouseTM
2
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Grow & Discover Tree House™
learning toy!
Learning is so much fun in the Grow & Discover Tree House™ by
VTech®! Your child’s senses will be running wild as they explore and
discover with ball play, shape sorting, turning gears and so much
more. They will develop language and motor skills as the smart
sensors teach colors, numbers and daily life concepts or just play
peek-a-boo. With so many fun activities, your little one will never want
to come down from their tree house!
ON/OFF/VOLUME
CONTROL SWITCH
BEE SLIDER
TURNING
CLOCK ARM
FIVE
NUMBER
BUTTONS
THREE SHAPE
SORTER SLOTS THREE CHARACTER BALLS
TURNING
GEARS
PEEK-A-BOO
WINDOW
FLIPPING
GATES
INCLUDED IN THIS PACKAGE
One electronic panel One fabric ball track panel with fabric tent cover
One spinning gears piece One ring One gate
One bird Two front feet Two connection sheets
Two connection poles Two connection poles
with curtains
Three ball tracks 3
Included In This Package
4
Three character balls Three shape sorter pieces Eleven screws
One user’s manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep this user’s manual as it contains important
information.
Included In This Package
CAUTION:
Adult assembly required. This package contains
small screws. For your child’s safety, do not let your
child play with the toy until it is fully assembled.
5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the activity panel. Use a screwdriver
to loosen the screw.
3. Install 2 new “AA” (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started
6
ASSEMBLY INSTRUCTIONS
With the VTech®Grow & Discover Tree House™,safetycomesrst.
To ensure your child’s safety, this product is only to be assembled by
an adult.Adultsupervisionrequired.
1. Attach the ring: Press the ring onto the
electronic panel until you hear it click
into place. Use a screwdriver to fasten
two of the screws into the holes on the
back of the unit.
2. Attach the front feet:Insertthefeet
into the holes on the bottom of the
activity panel. Use a screwdriver to
fasten three of the screws into the holes
on the bottom of both the feet.
3. Attach the spinning gears: Insert the
piece with the spinning gears into the
bottom of the electronic panel. Use a
screwdriver to fasten one of the screws
into the hole on the back of the unit.
Assembly Instructions
7
Assembly Instructions
4. Attach the gate: Use a small
screwdriver to press down the button
on the support foot. Slide the gate into
place and release the button to secure.
5. Attach the long connection pole:
Slide the long connection pole through
the fabric at the bottom of the mesh ball
track panel. Insert the ends of the pole
into the holes in each of the support
feet until you hear them click into place.
6. Attach the fabric tent cover: Insert
the two poles from the fabric tent cover
into the top of the round support posts
until you hear them click into place.
Insert the shorter connection pole
into the sides of the round support
posts. Use the screws to secure the
connection pole in place.
7. Attach the ball tracks:Inserttheball
tracks to the round openings, press
down until you hear the tracks click into
place.
8
8. Attach the connection sheets:
Please note, the connection sheets are
different lengths and are marked with
a letter on the bottom. Please make
sure to match the letter on the bottom
of the connection sheets with the
corresponding letters on the bottom of
the support feet. Insert the connection
sheets into the slots on the bottom of
the support feet until you hear them
click into place.
9. Attach the fabric tent cover to the
electronic panel: Insert the remaining
two poles on the fabric tent cover into
the slots on the activity panel until you
hear them click into place. Next attach
the fabric loops on the fabric tent cover
to the hooks on the back of the activity
panel.
10. Attach the connection poles with
the curtains: Insert the ends of the
connection poles into the holes in the
back of the activity panel and into the
round support posts until you hear
them click into place.
11. Attach the bird: Insert the bird into
the top of tree on the electronic panel.
Press down on the bird until you hear
it click into place.
Assembly Instructions
9
Disassembly Instructions
DISASSEMBLY INSTRUCTIONS
Remove the connection poles
1. Remove the pole from the top of
the mesh ball track panel: Use a
screwdriver to loosen the screw, then
remove the pole.
2. Remove the connection poles with
the fabric curtains and the fabric
tent cover: Insert a small screwdriver
into the hole on the side of the round
support post and push on the small
button to release the fabric tent cover
and the connection pole. Repeat this
process with the three remaining sides.
3. Remove the connection sheets
from the support feet: Insert a small
screwdriver into the holes on the
bottom of each of the support feet and
push on the small button to release the
connection sheets.
Inhaltsverzeichnis
Andere V-tech Spielzeug Handbücher
V-tech
V-tech Count & Colors Bouncing Frog Bedienungsanleitung
V-tech
V-tech Twist 'n' Play Koala Montageanleitung
V-tech
V-tech Laptop Deluxe Bedienungsanleitung
V-tech
V-tech Marble Rush Bedienungsanleitung
V-tech
V-tech Peppa Pig Play Smart Laptop Bedienungsanleitung
V-tech
V-tech Switch & Go Dinos - SkySlicer the Allosaurus Bedienungsanleitung
V-tech
V-tech Winnie the Pooh Spin n Teach Tree Bedienungsanleitung
V-tech
V-tech Mickey Mouse Cafe Montageanleitung
V-tech
V-tech Bounce & Discover Frog Bedienungsanleitung
V-tech
V-tech Tote & Go Laptop Bedienungsanleitung
V-tech
V-tech Explore & Learn Mat Bedienungsanleitung
V-tech
V-tech NITRO Bedienungsanleitung
V-tech
V-tech Smartwave PC Bedienungsanleitung
V-tech
V-tech Call & Count Phone Bedienungsanleitung
V-tech
V-tech InnoTab 3 The Learning App Tablet Bedienungsanleitung
V-tech
V-tech Light-Up Baby Touch Tablet Bedienungsanleitung
V-tech
V-tech Explore & Crawl Learning Cub Bedienungsanleitung
V-tech
V-tech Smart Start Premier Plus Bedienungsanleitung
V-tech
V-tech Disney TALK & TRACE CLIPBOARD Bedienungsanleitung
V-tech
V-tech Starshine the Bright Lights Unicorn Montageanleitung
