VADDIO RoboSHOT 12E USB Bedienungsanleitung

Installation Guide for

RoboSHOT USB Enterprise-Class PTZ

Conferencing Cameras

Including RoboSHOT 12 USB, RoboSHOT 12E USB,

and RoboSHOT 30E USB

Document 411-0000-31 Rev C

May 2019

Contents

Overview 1

What's in this Guide 1

Features 1

Unpacking the Camera 2

A Quick Look at the Camera 4

Front of the Camera 4

Back of the Camera – RoboSHOT 12 USB 5

Back of the Camera – RoboSHOT 12E USB and RoboSHOT 30E USB 6

Installation 7

Don’t Void Your Warranty! 7

Before You Install the Camera 7

Installing the Wall Mount 8

About Ceiling-Mounted Cameras 8

Video Resolution Setting 9

Camera Behavior Settings – RoboSHOT 12 USB 10

RS-232 Serial Communication Settings 11

RS-232 Connector Pin-Out 11

Cabling Notes 12

Connecting the Camera 13

Basic Connections – RoboSHOT 12 USB 13

Basic Connections – RoboSHOT 12E USB or RoboSHOT 30E USB 14

Installing the Camera 15

Powering Up the Camera 16

Status Light 16

Next Steps 16

Operation, Storage, and Care 16

Compliance and Conformity Statements – RoboSHOT 12E USB and RoboSHOT 30E USB 17

FCC Part 15 Compliance 17

ICES-003 Compliance 17

European Compliance 18

Compliance and Conformity Statements – RoboSHOT 12 USB 19

FCC Part 15 Compliance 19

ICES-003 Compliance 19

European Compliance 20

Warranty and Return Policy 21

Photo Credits 25

Index 26

Overview

This guide covers the RoboSHOT®USB enterprise-class PTZ conferencing cameras:

nRoboSHOT 12 USB, North America – 999-9920-000 (silver and

black)

nRoboSHOT 12 USB, Europe and UK – 999-9920-001 (silver and

black)

nRoboSHOT 12 USB, Australia and New Zealand – 999-9920-009

(silver and black)

nRoboSHOT 12E USB, North America – 999-99200-000 (black), 999-99200-000W (white)

nRoboSHOT 12E USB, Europe and UK – 999-99200-001 (black), 999-99200-001W (white)

nRoboSHOT 12E USB, Australia and New Zealand – 999-99200-009 (black), 999-99200-009W (white)

nRoboSHOT 30E USB, North America – 999-99230-000 (black), 999-99230-000W (white)

nRoboSHOT 30E USB, Europe and UK – 999-99230-001 (black), 999-99230-001W (white)

nRoboSHOT 30E USB, Australia and New Zealand – 999-99230-009 (black), 999-99230-009W (white)

Some models may be unavailable at this time.

What's in this Guide

This guide covers:

nUnpacking the camera

nTips for a successful installation

nInstructions for installing the camera mount

nInformation on connecting and mounting the camera

nCamera power-on

Complete product information is available in the Complete Manual for RoboSHOT USBEnterprise-

Class PTZ Conferencing Cameras.

Features

nRoboSHOT 12 USB and RoboSHOT 12E USB:12x optical zoom – perfect for huddle rooms and small

to medium conference rooms

RoboSHOT 30E USB:30x optical zoom – best for medium to large venues such as houses of worship

and lecture theaters

nRoboSHOT 12 USB:Exmor®1/2.8 type image sensor

RoboSHOT 12E USB and RoboSHOT 30E USB: Exmor R™ back-lit 1/2.5 type, high-speed, low-noise

image sensor

nSimultaneous uncompressed USB 3.0 and H.264 IP streaming (RTSP or RTMP)

nSelectable IP stream resolution; USB stream resolution auto-negotiated with conferencing client

nHDMI video output for local display

nSmooth, silent direct-drive motors for precise pan and tilt movements at up to 120° per second

nTri-Synchronous MotionTM simultaneous-arrival pan/tilt/zoom movement between presets

nUniversal Video Class (UVC) drivers supported in Windows®, Mac®OS, and Linux operating systems,

compatible with most UC conferencing applications

nPresenter-friendly IR remote control

nIntegration-ready Telnet and serial RS-232 control

nFull administrative control via web interface; manage the camera remotely while monitoring the stream

separately

Unpacking the Camera

Make sure you have received all the items you expected.

Download manuals, dimensional drawings, and other information from www.vaddio.com/support.

Caution

Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm

will damage it.

Note

Some models may be unavailable at this time.

RoboSHOT 12 USB, North America– 999-9920-000 (silver and black)

RoboSHOT 12 USB, Europe/UK– 999-9920-001 (silver and black)

RoboSHOT 12 USB, Australia/NewZealand – 999-9920-009 (silver and black)

nRoboSHOT 12 USB Camera

nVaddio IR Remote Commander

n12 VDC, 3.0 Amp switching power supply with AC cord set(s)

nThin Profile Wall Mount with mounting hardware, black

nEZCamera RS-232 control adapter, part number 998-1001-232

nUSB 3.0 Type A to Type B cable, 6 ft. (1.8m)

nQuick Start Guide

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

RoboSHOT 12E USB, North America– 999-99200-000 (black); 999-99200-000W (white)

RoboSHOT 12E USB, Europe/UK– 999-99200-001 (black); 999-99200-001W (white)

RoboSHOT 12E USB, Australia/NewZealand – 999-99200-009 (black); 999-99200-009W (white)

nRoboSHOT 12E USB camera, black or white

nThin Profile Wall Mount with mounting hardware, black or white, depending on camera color

nVaddioIR Remote Commander

nPoE+ mid-span power injector with AC cord set(s)

nEZCamera RS-232 control adapter, part number 998-1001-232

nUSB 3.0 Type A to Type B cable, 6 ft. (1.8m)

nQuick Start Guide

RoboSHOT 30E USB, North America– 999-99230-000 (black); 999-99230-000W (white)

RoboSHOT 30E USB, Europe/UK– 999-99230-001 (black); 999-99230-001W (white)

RoboSHOT 30E USB, Australia/NewZealand – 999-99230-009 (black); 999-99230-009W (white)

nRoboSHOT 30E USB camera, black or white

nThin Profile Wall Mount with mounting hardware, black or white, depending on camera color

nVaddio IR Remote Commander

nPoE+ mid-span power injector with AC cord set(s)

nEZCamera RS-232 control adapter, part number 998-1001-232

nUSB 3.0 Type A to Type B cable, 6 ft. (1.8m)

nQuick Start Guide

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

A Quick Look at the Camera

This section covers the physical features of the camera.

Front of the Camera

This photograph shows a RoboSHOT 12 USB camera. The RoboSHOT 12E USB and RoboSHOT 30E

USB are similar in appearance, and are available in either black or white.

Camera and Zoom Lens:

nRoboSHOT 12 USB: 12x optical zoom (12x in Super-Wide mode, 10x in normal mode). Recommended

for small to medium sized conference rooms.

nRoboSHOT 12E USB: 12x optical zoom; recommended for small to medium sized conference rooms.

nRoboSHOT 30E USB: 30x optical zoom; recommended for larger rooms.

IR sensor: Receives signals from the IR remote. Make sure there's nothing directly in front of the camera

base, and point the remote at the camera.

Status light: The multi-colored LED indicates the camera's current state.

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

Back of the Camera – RoboSHOT 12 USB

n12 VDC 3.0 A – EIAJ-04 jack. Connect only the power supply shipped with the camera or approved

replacement 12 VDC, 3A power supply. This connection is not needed if you connect to the network

using a mid-span PoE+ power injector.

nNetwork PoE+ – RJ-45 connector. Connect to the network for network access for IP streaming and

camera control via web interface or Telnet. Optionally connect to the network using a mid-span PoE+

power injector for power, streaming, and control.

nUSB 3.0 – USB type B connector. Connect to a computer for use with soft conferencing applications.

Provides uncompressed USB 3.0 stream.

nHDMIvideo select switch – Select the appropriate HDMI video output resolution for the near-end

video display. USB streaming resolution is auto-negotiated; IP streaming resolution is set in the

administrative web interface.

nCamera Settings – DIP switches to set camera behaviors such as IR frequency, image flip (camera is

invertible), normal or Super-Wide mode, and baud rate. See Camera Behavior Settings.

nHDMI – HDMI video output connector. Connect to the near-end video display.

nRS-232 – RJ-45 connector. Optionally connect to a controller to manage the camera using a modified

VISCA protocol.

Note

A label on the bottom of the camera lists the rotary and DIPswitch settings.

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

Back of the Camera – RoboSHOT 12E USB and RoboSHOT 30E USB

nNetwork PoE+ – RJ-45 connector. Connect to the network via mid-span PoE+ power injector.

Provides power and network access for IP streaming and camera control via web interface or Telnet.

nUSB 3.0 – USB type B connector. Connect to a computer for use with soft conferencing applications.

Provides uncompressed USB 3.0 stream.

nHDMIvideo select switch – Select the appropriate HDMI video output resolution for the near-end

video display. USB streaming resolution is auto-negotiated; IP streaming resolution is set in the

administrative web interface.

nHDMI output – HDMI video output connector. Connect to the near-end video display.

nRS-232 port – RJ-45 connector. Optionally connect to a controller to manage the camera using a

modified VISCA protocol.

Note

A label on the bottom of the camera lists the rotary switch settings.

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

Installation

This section covers:

nSelecting the location for the camera

nInstalling the mount

nRS-232 cable pin-out and communication settings

nSettings for the physical switches on the camera

nConnection diagrams

nConnecting and mounting the camera

And a required safety note here:

Note

PoE type networks connected to this equipment are for intra-building use only and should not be connected

to lines that run outside of the building in which this product is located.

Don’t Void Your Warranty!

Caution

Always support the camera's body when lifting or moving it. Lifting the camera by its head or mounting arm

will damage it.

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

For RoboSHOT 12 USB:Use the power supply included with the camera or recommended for use with it.

Always check the output voltage listed on the power supply label, as power supplies for different products

may look nearly identical. Using the wrong power supply will void the warranty, possibly causing unsafe

operating conditions and damage to the product.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these

things happen, return it to Vaddio for safety and functional testing.

Before You Install the Camera

Things to keep in mind when deciding where to install the camera:

nConsider camera viewing angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions

where the camera is to be mounted.

nEnsure that the camera body can move freely and will normally point away from the ceiling and lights.

The camera will not perform well if it is pointed toward a light source such as a light fixture or window.

nIf the IR Remote Commander will be used, ensure that nothing blocks the IR lens in the camera's base.

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

Prepare for a successful installation:

nBe sure you can identify all cables correctly.

nCheck Cat-5 cables for continuity.

nEnsure that the video resolution rotary switch and the DIP switches (if any) are set appropriately.

nTalk to the network administrator. If installing the camera in a non-DHCP network (one that does not

automatically assign IP addresses), you will need to configure the camera with a static IP address as

directed by the network administrator.

Installing the Wall Mount

The camera is shipped with a wall mount. Other mounting options are available as well. Contact us if you

don’t have the camera mount you need.

You can install the camera wall mount to a 2-gang wall box or directly to the drywall.

nIf you mount it to drywall, use the wall anchors provided with the wall mount.

nIf you mount it to a wall box, use the cover plate screws supplied with the wall box.

If you install the camera wall mount to drywall, use the wall anchors provided with the mount.

About Ceiling-Mounted Cameras

If you use an inverted mount, set the camera's Image Flip DIP switch ON for inverted operation. This

orients the video image correctly and sets the tilt motors to respond appropriately to tilt up and down

commands from the remote, web interface, and connected control devices.For RoboSHOT Elite series

cameras, this switch is available to the administrator on the System page of the web interface.

Note

If mounting this camera using the Half-Recessed Ceiling Mount, you will need to power the mount's IR

receiver separately to use the IRremote with the camera. Use Power Extension Module 999-1005-021.

This camera does not supply power to the mount's IR receiver.

Installation Guide for RoboSHOT USBEnterprise-Class PTZConferencing Cameras

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere VADDIO Sicherheitskamera Handbücher

VADDIO

VADDIO RoboSHOT HDBT Series Bedienungsanleitung

VADDIO

VADDIO ZOOMSHOT 20 Bedienungsanleitung

VADDIO

VADDIO WallVIEW D80 PTZ Bedienungsanleitung

VADDIO

VADDIO CLEARVIEW HD-20SE Bedienungsanleitung

VADDIO

VADDIO WallVIEW CCU HD-18 HD-SDI Bedienungsanleitung

VADDIO

VADDIO CLEARVIEW HD-20SE Bedienungsanleitung

VADDIO

VADDIO IntelliSHOT 999-21100-000 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT HD-SDI Series Bedienungsanleitung

VADDIO

VADDIO PowerVIEW HD-22 Bedienungsanleitung

VADDIO

VADDIO WALLVIEW DVI/HDMI HD-20 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12 Bedienungsanleitung

VADDIO

VADDIO ZoomShot 999-6920-000 Bedienungsanleitung

VADDIO

VADDIO CLEARVIEW HD-18 Bedienungsanleitung

VADDIO

VADDIO WALLVIEW DVI/HDMI HD-20 Bedienungsanleitung

VADDIO

VADDIO PrimeSHOT 20 HDMI Bedienungsanleitung

VADDIO

VADDIO WallVIEW CCU HD-18 HD-SDI Bedienungsanleitung

VADDIO

VADDIO ZOOMSHOT WALLVIEW SR 999-6918-001 Bedienungsanleitung

VADDIO

VADDIO 999-9200-050 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12E NDI Bedienungsanleitung

VADDIO

VADDIO ZOOMSHOT 20 Bedienungsanleitung

VADDIO

VADDIO WallVIEW 50i PTZ HideAway Bedienungsanleitung

VADDIO

VADDIO DOMEVIEW HD Bedienungsanleitung

VADDIO

VADDIO WallView PRO H900 Bedienungsanleitung

VADDIO

VADDIO BU-45H Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung