VADDIO RoboSHOT 12 HDBT Bedienungsanleitung

Installation Guide for

RoboSHOT 12 HDBT and

RoboSHOT 30 HDBT

High-Performance PTZ Cameras

Document 411-0003-31 Rev B

February 2017

Contents

Overview 1

What's in this Guide 1

Camera Features 1

Unpacking the Camera 2

A Quick Look at the Camera 5

Front of the Camera 5

Back of the Camera 6

Switch Settings 6

Video Resolution 6

Camera Settings 7

Installation 8

Before You Install the Camera 8

Don’t Void Your Warranty! 8

Operation, Storage, and Care 8

Cabling Notes 9

Installing the Wall Mount 10

About Ceiling-Mounted Cameras 10

Basic Connection Diagram 11

Options for Power and Other Connections 11

Installing the Camera 12

Powering Up the Camera 13

Next Steps 13

Compliance Statements and Declarations of Conformity 14

FCC Part 15 Compliance 14

ICES-003 Compliance 14

European Compliance 15

Warranty Information 16

Index 17

Overview

This guide covers the RoboSHOT™ 12 and 30 HDBT PTZ cameras:

nRoboSHOT 12 HDBT (silver), North America – 999-9960-000

nRoboSHOT 12 HDBT (silver), Europe and UK – 999-9960-001

nRoboSHOT 12 HDBT (silver), Australia and New Zealand – 999-

9960-009

nRoboSHOT 30 HDBT (black), North America – 999-9963-000

nRoboSHOT 30 HDBT (black), Europe and UK – 999-9963-001

nRoboSHOT 30 HDBT (black), Australia and New Zealand – 999-9963-009

nRoboSHOT 30 HDBT (white), North America – 999-9963-000W

nRoboSHOT 30 HDBT (white), Europe and UK – 999-9963-001W

nRoboSHOT 30 HDBT (white), Australia and New Zealand – 999-9963-009W

What's in this Guide

This guide covers:

nUnpacking the camera

nTips for a successful installation

nInstructions for installing the camera mount

nInformation on connecting and mounting the camera

nCamera power-on

Complete product information is available in the Integrator's Complete Guide to RoboSHOT HDBT

High-Performance PTZ Cameras.

Download manuals, dimensional drawings, and other information from www.vaddio.com/support.

Camera Features

nRoboSHOT 12 HDBT: Exmor® 1/2.8 type, high-speed, low-noise image sensor; 12X optical zoom; 73°

horizontal field of view in wide mode – perfect for small to medium rooms

nRoboSHOT 30 HDBT: Exmor R™ back-lit 1/2.8 type, high-speed, low-noise image sensor; 30X optical

zoom; 65° horizontal field of view for medium to large venues – houses of worship, lecture theaters,

IMAG systems

n2.38 megapixels total, full HD (native 1080p/60)

nIP H.264 streaming – view real-time video from the camera using any standards-based media viewer

nTri-Synchronous Motion™ simultaneous 3-axis pan/tilt/zoom movement between presets

nSmooth, silent direct-drive motors – ultra-accurate positioning, from 120° per second down to 0.35° per

second

nDesigned for use with the Vaddio OneLINK™ HDMI extension module for HDBaseT Cameras

nWeb interface for remote administration and operation, integration-ready Telnet or RS-232 control,

presenter-friendly IR remote control

Unpacking the Camera

Make sure you received all the items you expected. Here are the packing lists for the RoboSHOT HDBT

cameras.

Caution

Always support the camera's base when picking it up. Lifting the camera by its head or mounting

arm will damage it.

RoboSHOT 12 HDBT, North America – 999-9960-000

nRoboSHOT 12 HDBTCamera (998-9960-000)

nThin Profile Wall Mount with Mounting Hardware (535-2000-240)

nVaddio IR Remote Commander (998-2100-000)

n12 VDC, 3.0 Amp Switching Power Supply

nAC Cord Set for North America

nQuick-Start Guide (342-1219)

RoboSHOT 12 HDBT, Europe and UK – 999-9960-001

nRoboSHOT 12 HDBTCamera (998-9960-000)

nThin Profile Wall Mount with Mounting Hardware (535-2000-240)

nVaddio IR Remote Commander (998-2100-000)

n12 VDC, 3.0 Amp Switching Power Supply

nEuro Power Cord

nUK Power Cord

nQuick-Start Guide (342-1219)

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

RoboSHOT 12 HDBT, Australia and New Zealand – 999-9960-009

nRoboSHOT 12 HDBTCamera (998-9960-000)

nThin Profile Wall Mount with Mounting Hardware (535-2000-240)

nVaddio IR Remote Commander (998-2100-000)

n12 VDC, 3.0 Amp Switching Power Supply

nPower Cord for Australia and New Zealand

nQuick-Start Guide (342-1219)

RoboSHOT 30 HDBT, North America, black – 999-9963-000

RoboSHOT 30 HDBT, North America, white – 999-9963-000W

nRoboSHOT 30 HDBT Camera (998-9963-000 or 998-9963-000W)

nThin Profile Wall Mount with Mounting Hardware, black or white depending on camera color (535-2000-

240 or 535-2000-240W)

nVaddio IR Remote Commander (998-2100-000)

n12 VDC, 3.0 Amp Switching Power Supply

nAC Cord Set for North America

nQuick-Start Guide (342-1219)

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

RoboSHOT 30 HDBT, Europe and UK, black – 999-9963-001

RoboSHOT 30 HDBT, Europe and UK, white – 999-9963-001W

nRoboSHOT 30 HDBT Camera

nThin Profile Wall Mount with Mounting Hardware, black or white depending on camera color (535-2000-

240 or 535-2000-240W)

nVaddio IR Remote Commander (998-2100-000)

n12 VDC, 3.0 Amp Switching Power Supply

nEuro Power Cord

nUK Power Cord

nQuick-Start Guide (342-1219)

RoboSHOT 30 HDBT, Australia and New Zealand, black – 999-9963-009

RoboSHOT 30 HDBT, Australia and New Zealand, white – 999-9963-009W

nRoboSHOT 30 HDBT Camera

nThin Profile Wall Mount with Mounting Hardware, black or white depending on camera color (535-2000-

240 or 535-2000-240W)

nVaddio IR Remote Commander (998-2100-000)

n12 VDC, 3.0 Amp Switching Power Supply

nPower Cord for Australia and New Zealand

nQuick-Start Guide (342-1219)

Download manuals, dimensional drawings, and other information from www.vaddio.com/support.

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

A Quick Look at the Camera

The RoboSHOT 12 and 30 models are similar. The RoboSHOT 12 is the camera on the left in the photo.

Front of the Camera

nCamera and Zoom Lens: The 12 and 30 models use different optical components.

oRoboSHOT 12 HDBT:12X optical zoom lens (12X in Super-Wide mode and 10X in normal mode),

Exmor 1/2.8-type, high-speed, low noise image sensor

oRoboSHOT 30 HDBT: 30X optical zoom lens, Exmor-R 1/2.8 type, backlit, high-speed, low-noise,

image sensor

nIR Sensors: Sensors in the front of the camera base receive signals from the remote. Make sure

there's nothing directly in front of the camera base, and point the remote at the camera.

nStatus indicator: The multicolored LED indicates the camera's current state.

oBlue: Normal operation (blinks off momentarily when the camera receives a command from the

remote)

oPurple: In standby mode or booting

oYellow: Firmware update in progress

oFlashing purple: Error

oRed: On-air tally

Caution

Do not remove power or reset the camera while the indicator is yellow, showing a firmware update in

progress. Interrupting a firmware update can make the camera unusable.

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

Back of the Camera

Rear panel connections are identical for both models.

From left to right:

nPower connector: If not using a OneLINK HDMI extension module, use the 12 VDC, 3.0 A power

supply shipped with the camera.

nOneLINK HDBaseT/Network RJ-45 connector: If not using a OneLINK HDMI extension module,

connect to the network.

nHDMI connector: HDMI video output; connect to a display if not using a OneLINK HDMI extension

module.

nVideo Resolution Select switch: Select the video output resolution.

nCamera Settings DIP switches: Settings for IR remote frequency, baud rate and image flip.

Switch Settings

RoboSHOT cameras use a rotary switch to set the video resolution and a set of DIP switches that

determine certain camera functions. A label on the bottom of the camera provides a quick reference for

setting the switches.

Note

Set the switches appropriately before mounting the camera.

Video Resolution

Set the desired output resolution for the camera with the rotary switch. Switch positions 9 through D are not

used.

Switch position Resolution

0 720p/59.94

1 1080i/59.94

2 1080p/59.94

3 720p/60

4 1080i/60

5 1080p/60

6 720p/50

7 1080i/50

8 1080p/50

9 – D Not used

E 1080p/30

F 1080p/25

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

Camera Settings

Use the DIP switches to set camera behaviors.

Note

When the camera is right side up, switches are in their default positions when they are up.

IR Frequency Selection:The IR Remote Commander can control up to three cameras in the same room

independently, if they are configured with different IR frequencies. Use switches 1 and 2 to select the

frequency to identify the camera as camera 1, 2, or 3; then use the Camera Select buttons at the top of the

remote to select the camera you want to control.

IR: Leave switch 3 in the default UP position if the IR remote will be used.

Image Flip: If mounting the camera upside-down, set switch 4 to the DOWN position: IMAGE FLIP ON.

Super Wide Mode (RoboSHOT 12 HDBT only): To use Super-wide mode, set switch 5 to the DOWN

position. This gives 12X zoom with a 73º horizontal angle of view. Normal mode provides 10X zoom with a

67.2º horizontal field of view (HFOV).

Baud Rate:Set the baud rate for RS-232 communication using switch 6. Most applications use 9600 bps

(switch 6 UP), which is recommended when using long cable runs. Use the 38,400 bps setting (switch 6

DOWN) for short control lines only.

Leave Switch 7 in the default UP position unless sRGB color output is needed.

Switch 8 is not currently used.

Pro Tip

Double-check switch settings before you mount the camera.

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

Installation

This section covers

nSiting the camera

nInstalling the mount

nConnecting the camera

nInstalling the camera

Before You Install the Camera

nChoose a camera mounting location that will optimize camera performance. Consider camera viewing

angles, lighting conditions, line-of-sight obstructions, and in-wall obstructions where the camera is to be

mounted.

nIf the IR Remote Commander will be used, ensure that nothing blocks the IRlens in the camera's base.

nEnsure that the camera body can move freely and point away from the ceiling and lights.

nFollow the installation instructions included with the camera mount.

Don’t Void Your Warranty!

Caution

This product is for indoor use. Do not install it outdoors or in a humid environment without the appropriate

protective enclosure. Do not allow it to come into contact with any liquid.

Use only the power supply included with this product. Using a different one will void the warranty, and

could create unsafe operating conditions or damage the product.

Do not install or operate this product if it has been dropped, damaged, or exposed to liquids. If any of these

things happen, return it to Vaddio for safety and functional testing.

DomeVIEW enclosures are available to allow outdoor installation of RoboSHOT cameras. Learn more at

www.vaddio.com/products.

Operation, Storage, and Care

For smears or smudges on the product, wipe with a clean, soft cloth. Use a lens cleaner on the lens. Do not

use any abrasive chemicals.

Keep this device away from food and liquids.

Do not operate or store the device under any of the following conditions:

nTemperatures above 40°C (104°F) or below 0°C (32°F)

nHigh humidity, condensing or wet environments

nInclement weather

nSevere vibration

nBetween converging tectonic plates

nDry environments with an excess of static discharge

Do not attempt to take this product apart. There are no user-serviceable components inside.

Installation Guide for RoboSHOT HDBT High-Performance PTZ Cameras

Andere Handbücher für RoboSHOT 12 HDBT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere VADDIO Sicherheitskamera Handbücher

VADDIO

VADDIO VADDIO/CANON BU Series Bedienungsanleitung

VADDIO

VADDIO CLEARVIEW HD-18 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12E HDBT Bedienungsanleitung

VADDIO

VADDIO ZOOMSHOT 20 Bedienungsanleitung

VADDIO

VADDIO WIDESHOT WALLVIEW MINI 999-6911-100 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

VADDIO

VADDIO WALLVIEW PRO HD1 Bedienungsanleitung

VADDIO

VADDIO PrimeSHOT 20 HDMI Bedienungsanleitung

VADDIO

VADDIO WallView Bedienungsanleitung

VADDIO

VADDIO WALLVIEW PRO H700 Bedienungsanleitung

VADDIO

VADDIO CLEARVIEW HD-20 Bedienungsanleitung

VADDIO

VADDIO ZOOMSHOT WALLVIEW SR 999-6918-001 Bedienungsanleitung

VADDIO

VADDIO WALLVIEW DVI/HDMI HD-20 Bedienungsanleitung

VADDIO

VADDIO WallVIEW 50i PTZ HideAway Bedienungsanleitung

VADDIO

VADDIO CeilingVIEW 70 PTZ HideAway Bedienungsanleitung

VADDIO

VADDIO Wallview CCU HD-20 HD-SD Bedienungsanleitung

VADDIO

VADDIO WallVIEW HD-USB PRO System Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 20 UHD Bedienungsanleitung

VADDIO

VADDIO WallVIEW CCU HD-19 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12E NDI Bedienungsanleitung

VADDIO

VADDIO CeilingVIEW 70 PTZ Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12 Bedienungsanleitung

VADDIO

VADDIO RoboSHOT 12 HD-SDI Bedienungsanleitung

VADDIO

VADDIO IntelliSHOT Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung