Velleman CAMCOLVC18 Bedienungsanleitung

CAMCOLVC18

HD COLOUR CAMERA

HD-KLEURENCAMERA

CAMÉRA COULEUR HD

CÁMARA HD A COLOR

HD-FARBKAMERA

USER MANUAL 5

GEBRUIKERSHANDLEIDING 15

MODE D’EMPLOI 26

MANUAL DEL USUARIO 37

BEDIENUNGSANLEITUNG 47

CAMCOLVC18

V. 04 – 06/09/2013 2 ©Velleman nv

CAMCOLVC18

V. 04 – 06/09/2013 3 ©Velleman nv

CAMCOLVC18

V. 04 – 06/09/2013 4 ©Velleman nv

CAMCOLVC18

V. 04 – 06/09/2013 5 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of

the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, don't

install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Caution: Do not operate buttons or adjust settings while in motion

as this may lead to hazardous situations.

There are no user-serviceable parts inside the device. Refer to an

authorized dealer for service and/or spare parts.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages

of this manual.

•Protect this device from heavy shocks and abuse. Avoid brute force

when operating the device.

•Protect the device against extreme heat and dust.

•Familiarise yourself with the functions of the device before actually

using it.

•All modifications of the device are forbidden for safety reasons.

•Only use the device for its intended purpose. Using the device in an

unauthorised way will void the warranty.

•Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for

any ensuing defects or problems.

•Keep this manual for future reference.

CAMCOLVC18

V. 04 – 06/09/2013 6 ©Velleman nv

4. Features

•portable action camera with different mounting brackets

•the video capture camera records images on SD card (not included)

•video recording quality: 720p HD video – 20 fps

•easy and user-friendly setup

•comes with USB cable, A/V cable, and brackets

•weatherproof design

•white LED backlight screen.

5. Overview

Refer to the illustrations on page 2of this manual.

cap

battery compartment

control buttons

microphone

menu button

11 camera base

2b record button 12 camera base handles

2c power button 13 handlebar bracket

display

screw and bolt

lens

helmet bracket

ring

hook-and-loop strap

6 mini-USB port 17 rubber strap

SD card slot

USB cable

video output

video cable

6. Installation

6.1 Connecting the base of the camera

If it is not yet done, screw the base [11]on the bottom of the camera (see

illustration A). The base allows you to fix the camera:

•on the handlebar of your bicycle using the handlebar bracket

•on your helmet using the Velcro or rubber strap using the helmet

bracket

•or directly onto a tripod, using the screw hole in the base.

6.2 Mounting the camera on a handlebar

1. Slide the handlebar bracket [13]over the handlebar (see

illustration B).

Tip: If necessary, insert one or more rubber pads between bracket and

handlebar to ensure a tight grip.

2. Fix the bracket with the screw and bolt [14](see illustration C).

CAMCOLVC18

V. 04 – 06/09/2013 7 ©Velleman nv

3. Slide the camera base in the handlebar bracket until it clicks into place

(see illustration D).

4. Adjust the camera position: loosen the ring [5], adjust, then tighten

again to keep the camera firmly in place.

5. To adjust the bracket position: loosen the bolt [14], reposition the

bracket on the handlebar, then tighten the bolt again (see

illustration E).

6. To take the camera off the bracket again, squeeze the camera base

handles [12]together and slide the camera off the bracket.

6.3 Mounting the camera on a helmet using the rubber strap

1. Thread the rubber strap [17]through the helmet bracket [15](see

illustration F).

2. Fit thestrap over the helmet with the bracket in the desired position

(see illustration G).

3. Make sure thestrap fits tightly around the helmet.

4. Slide the camera into the bracket (see illustration H).

5. Adjust the camera position: loosen the ring [5], adjust, then tighten

again to keep the camera firmly in place.

6.4 Mounting the camera on a helmet using the hook-and-loop

strap

1. Thread the hook-and-loop strap [16]through the helmet bracket [15]

(see illustration F).

2. Place the bracket on the helmet in the desired position and thread the

strap through the helmet vents (see illustration I).

3. Tighten the strap and fix the ends together to keep the bracket in place.

4. Slide the camera into the bracket (see illustration J).

5. Adjust the camera position: loosen the ring [5], adjust, then tighten

again to keep the camera firmly in place.

7. Operation

7.1 Batteries

Do not puncture batteries or throw them in fire as they may

explode. Do not attempt to recharge non-rechargeable batteries

(alkaline). Dispose of batteries in accordance with local regulations.

Keep batteries away from children.

Replace the batteries when the low battery indication appears on the

display. When the batteries are completely empty, you will hear a long beep

and the camera shuts off automatically after 20 seconds.

Note: Always replace all batteries at once.

1. Make sure the camera is switched off.

CAMCOLVC18

V. 04 – 06/09/2013 8 ©Velleman nv

2. Unscrew the cap [1] from the bac of the camera.

3. Push the battery compartment lid [9] downwards to open the battery

compartment.

4. Insert 2 new 1.5V AA al aline batteries (LR6, not incl.) in accordance

with the polarity mar ings. Only use batteries of the same type and

brand.

5. Close the battery compartment.

6. Screw the cap [1] bac onto the bac of the camera.

7.2 Switching on and off

To switch the camera on, press and hold the power button for about

2 seconds. You hear a beep and the display lights up.

The display shows the remaining time for video recording in hours and

minutes.

ote: If the memory card is full, or if there is no memory card in the

camera, the display shows “FULL”.

To switch the camera off, press and hold the power button for about

2 seconds. The display shows “OFF” and you hear a beep. The camera shuts

off after 1 second.

7.3 Memory card

Recommendations

•As the camera records in high definition, use a memory card of at least

8 GB (16 or 32 GB recommended).

•Use high-speed SD cards for best performance and quality.

•Format the memory card before use.

Inserting a memory card

1. Ma e sure the camera is switched off.

2. Unscrew the cap [1] from the bac of the camera.

3. Insert an SD card (not included) in the card slot [7]. Push it in until it

clic s into place.

4. To remove the SD card again, push the card gently so that it pops out.

5. Screw the cap [1] bac onto the bac of the camera.

Formatting a memory card

Caution: Formatting erases all data from the card. If necessary, connect

the camera to a pc to bac up the data before formatting.

1. Ma e sure the camera is switched off.

2. Insert the memory card in the card slot [7].

3. Switch the camera on.

4. Press the record button for about 5 seconds.

The display shows “FOR” (for “formatting’).

CAMCOLVC18

V. 04 – 06/09/2013 9 ©Velleman nv

5. Wait until the display shows the remaining recording time again.

The card is now empty and ready for use with the camera.

7.4 Configuration

Setting the video resolution

You can set the resolution of the recorded video to 720p (1280×720) or

VGA (640x480).

To set the resolution:

1. Switch the camera on.

2. Press and hold the menu button for 2 seconds.

The 720p icon blinks.

3. Press the record button once to switch to VGA. The VGA icon

blinks.

4. Press the menu button to confirm.

Note: The remaining recording time is adjusted to the resolution. You can

record longer in VGA mode (lower resolution) than in 720p mode.

Setting the time and date

1. Switch the camera on.

2. Press and hold the menu button for 2 seconds.

The 720p icon blinks.

3. Press the record button repeatedly until “ALL” appears on the display.

4. Press the menu button for 2 seconds.

“Y” (for “year”) and the third digit of the year blink on the display.

5. Press the record button repeatedly to set the digit. Then press the menu

button to confirm and move to the next digit.

6. Repeat for the last digit of the year, the month (“M”), day (“D”), hour

(“H”), and minutes (“M”).

The camera returns to video recording mode after you set all the digits.

7.5 Recording video

Normal recording

1. Make sure there is a memory card installed in the camera.

2. Switch the camera on. The display shows the remaining recording time.

3. Press the record button to start recording.

The display backlight blinks. The display shows the recording time in

minutes and seconds. The camera saves a video file every 5 minutes.

4. Press the record button again to stop recording.

The display backlight stops blinking. The display shows the remaining

recording time.

Note: When the memory card is full, the display shows “FULL”. The camera

automatically stops recording.

CAMCOLVC18

V. 04 – 06/09/2013 10 ©Velleman nv

Loop recording with USB charger

If you use the camera with a USB charger, you can record continuously. The

camera then saves a video file every 2 minutes. When the memory card is

full, it overwrites the oldest recordings.

There are two possibilities:

•Camera off, batteries installed: Plug the camera into a suitable USB

charger. The camera switches on and starts loop recording

automatically. Press the record button to stop recording. When you

unplug the USB charger, the camera stops recording and switches off

after 2 seconds.

•Camera off, no batteries installed: Plug the camera into a suitable USB

charger. The camera switches on after 6 seconds and starts loop

recording automatically. Press the record button to stop recording.

When you unplug the USB charger, the camera switches off

immediately.

7.6 Playing video

Playing on TV

1. Switch the camera on.

2. Unscrew the cap [1] from the back of the camera.

3. Insert the black plug of the video cable (included) in the video output

[8] of the camera.

4. Insert the other end (yellow, red, white plugs) of the cable in the

corresponding RCA connectors on your TV.

The camera display shows “AU”.

5. Make sure the TV is set to the correct channel.

6. On the camera, press the menu button to select the video file you want

to play.

7. Press the record button to start playback.

8. Press the record button to pause/continue.

9. Press the menu button to stop playback. You can now select a different

video file for playback.

Tip: During playback on TV, you can quickly delete the video file from the

memory card by pressing and holding the menu button. If there are no files

on the memory card, the TV displays “NO FILE”.

Playing on PC

1. Unscrew the cap [1] from the back of the camera.

2. Insert one end of the USB cable (included) in the mini-USB port [6] of

the camera.

3. Insert the other end in a free USB port on your computer.

The camera display shows “PC”.

4. On the pc, open My Computer and look for the drive that represents

the camera.

You can copy, delete, or view the files from here.

Andere Handbücher für CAMCOLVC18

Inhaltsverzeichnis

Sprachen:

Andere Velleman Sicherheitskamera Handbücher

Velleman

Velleman CAMCOLD4 Bedienungsanleitung

Velleman

Velleman CAMCOLD23 Bedienungsanleitung

Velleman

Velleman CAMSETW6 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL2 Bedienungsanleitung

Velleman

Velleman CAMCOLD26 Bedienungsanleitung

Velleman

Velleman CCTVPROM11 Bedienungsanleitung

Velleman

Velleman CAMCOLVC1 Bedienungsanleitung

Velleman

Velleman CAMCOLD24 Bedienungsanleitung

Velleman

Velleman CAMCOLD14 Bedienungsanleitung

Velleman

Velleman CAMCOLBBUL16N Bedienungsanleitung

Velleman

Velleman CAMCOLBUL2N Bedienungsanleitung

Velleman

Velleman CAMCOLD Bedienungsanleitung

Velleman

Velleman camcolvc21 Bedienungsanleitung

Velleman

Velleman CAMCOLD8N Bedienungsanleitung

Velleman

Velleman CAMIP1 Bedienungsanleitung

Velleman

Velleman CAMCOLD12 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL28 Bedienungsanleitung

Velleman

Velleman CAMCLOPIR Bedienungsanleitung

Velleman

Velleman CAMCOLD25W Bedienungsanleitung

Velleman

Velleman CAMTVI8W Bedienungsanleitung

Velleman

Velleman CAMCOLD7 Bedienungsanleitung

Velleman

Velleman CAMTVI6 Bedienungsanleitung

Velleman

Velleman CAMCOLD15 Bedienungsanleitung

Velleman

Velleman CAMD2 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung