Velleman CAMIP22 Bedienungsanleitung

CAMIP22

HD IP COLOUR CAMERA - WIFI - INDOOR

HD IP-KLEURENCAMERA - WIFI - GEBRUIK BINNENSHUIS

CAMÉRA COULEUR IP HR - WIFI - USAGE À L'INTÉRIEUR

CÁMARA IP A COLOR HD - WIFI - PARA EL USO EN INTERIORES

HD IP-FARBKAMERA - WIFI - FÜR DEN INNENBEREICH

USER MANUAL 3

GEBRUIKERSHANDLEIDING 12

MODE D'EMPLOI 21

MANUAL DEL USUARIO 30

BEDIENUNGSANLEITUNG 39

CAMIP22

V. 02 –04/06/2015 2 ©Velleman nv

CAMIP22

V. 02 –04/06/2015 3 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle

could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling. This device should be

returned to your distributor or to a local recycling service. Respect the local environmental

rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into

service. If the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

Keep this device away from children and unauthorized users.

Risk of electroshock when opening the cover. Touching live wires can cause life-

threatening electroshocks. Do not disassemble or open the housing yourself. Have the

device repaired by qualified personnel.

There are no user-serviceable parts inside the device. Refer to an authorized dealer for

service and/or spare parts.

3. General Guidelines

Refer to the Velleman®Service and Quality Warranty on the last pages of this manual.

Keep this device away from dust and extreme heat.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it.

All modifications of the device are forbidden for safety reasons.

Only use the device for its intended purpose. Using the device in an unauthorised way will void the

warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and

the dealer will not accept responsibility for any ensuing defects or problems.

DO NOT use this product to violate privacy laws or perform other illegal activities.

4. Features

This camera is equipped with a 1-megapixel sensor. The video quality is maximum 720p. The IR-cut

filter will filter the IR light, so it cannot distort the colour image. When it gets dark, the camera

automatically switches to night mode. In night mode, the camera enables the IR LEDs and disables the

IR-cut filter.

consumer friendly user interface

network access:

owired: Ethernet IEEE802.3, 8P8C (RJ45) connector

owireless: Wifi IEEE 802.11 b/g/n

integrated IR-filter

free DDNS service embedded

720p video quality

indoor use

free smartphone software:

oiPhone®: https://itunes.apple.com/nl/app/foscam-viewer/id740126713?mt=8

oAndroid®: https://play.google.com/store/apps/details?id=com.ipc.newipc&hl=nl_BE

CAMIP22

V. 02 –04/06/2015 4 ©Velleman nv

5. Overview

Refer to the illustrations on page 2 of this manual.

power cable

ceiling

LAN cable

mounting plate

reset button

lens enclosure

lens

positioning ring

IR LED

fixation ring

6. Installation

Refer to the illustrations on page 2 of this manual.

1. Choose a location for the camera, keeping following guidelines in mind:

odo not install the camera in locations where extremely high or low temperatures or excessive

vibrations may occur.

oavoid mounting the camera near high electro-magnetic fields.

odo not aim the camera at the sun or other extremely bright objects or reflections (e.g. metal

doors).

2. Hold the mounting plate [7] and unscrew the fixation ring [10]by turning it counter-clockwise.

Note that the lens enclosure [8] and positioning ring [9] are also released.

3. Use the mounting plate [7] to determine the position of the mounting holes. Drill the holes.

4. Guide the power [1] and LAN cable [2] through one of the cable slots and fix the mounting

plate [7] on the ceiling or wall with the four screws.

5. Position the positioning ring [9] over the lens enclosure [8] onto the mounting plate [7] and then

fix the ensemble by screwing the fixation ring [10]onto the mounting plate [7]. Make sure the

fixation ring is not screwed too tight to leave the option open to position the lens into the direction

of the desired field of operation.

6. Connect the LAN connector [2] to a router (not incl.) using the included Ethernet cable.

7. Connect the power connector [1] to the included 12 VDC power supply.

8. Set up the desired field of observation by adjusting the position of the lens enclosure [8] in the

positioning ring [9].

9. Tighten the fixation ring [10]to secure the camera’s position.

7. Software

1. Insert the included CD-ROM in the CD-ROM drive of your computer.

2. Search for and open the folder [IP Camera Search Tool].

3. Search for the folder [For Windows OS] or [For Mac OS]. Open the appropriate folder according to

your computer’s operating system and copy the tool file onto your desktop.

Remark:

You can always download the free software (see URL above).

8. Operation

8.1 Accessing the Camera

1. Enable the DHCP feature on your router.

2. Launch the software. It should display the camera’s IP address in your LAN.

CAMIP22

V. 02 –04/06/2015 5 ©Velleman nv

3. Double-click the camera listed. The default browser will open up to the camera’s login page.

Download and install the IPCWebComponents when logging in for the first time.

Click [Install].

4. Click [Install] to install the IPCWebComponents.

5. After installation is completed, refresh the browser. Enter [admin] as your username and click

[Login].

Enter [admin] and click [Login].

CAMIP22

V. 02 –04/06/2015 6 ©Velleman nv

6. When setting up your camera for the first time, you will be requested to modify the default

username and/or the password if both are still set to default. Click [Modify] to confirm.

Enter a new username and password.

7. The setup wizard appears after logging in. Set up all necessary parameters.

8. The live video image appears on the web interface.

Live video.

Remarks:

Have you lost your password? Use a pin and hold the reset button on the bottom of the camera

pressed for 5 seconds to reset the camera to factory settings.

CAMIP22

V. 02 –04/06/2015 7 ©Velleman nv

8.2 Wireless Connection

1. Open the [Settings] tab on top of the interface.

2. Click [Network] > [Wireless Settings] on the left side of the interface. Click [Scan].

3. Click the name of your router in the list, and the corresponding SSID and encryption will be

automatically filled on the right side of the page. Enter your password.

Click the router name and enter your password.

4. Click [Save] and disconnect the network cable. Do not power off the camera until it is displayed in

the list.

Enter your password and click [Save].

CAMIP22

V. 02 –04/06/2015 8 ©Velleman nv

8.3 Remote Access

1. Open the [Settings] tab on top of the interface.

2. Click [Network] > [IP Configuration] on the left side of the interface. Uncheck the [Obtain IP DHCP]

case.

Uncheck the [Obtain IP DHCP] case.

3. Click [UPnP] and [DDNS] and enable both functions.

Enable the UPnP and DDNS functions.

CAMIP22

V. 02 –04/06/2015 9 ©Velleman nv

4. Click [Port] and choose your camera in the [HTTPS Port] field.

Choose your camera.

Enabling the UPnP

Skip the following steps if UPnP is enabled.

1. If there is a UPnP function on your router, click [Forwarding] > [UPnP]. Make sure the status is

enabled.

Choose your camera.

2. If there is no UPnP function on your router, click [Forwarding] > [Virtual Servers]. Click [Add New].

Click [Add New].

CAMIP22

V. 02 –04/06/2015 10 ©Velleman nv

3. Enter the port and IP address of your camera and click [Save].

Enter the port and IP address. Click [Save].

4. Access your camera using following URL: https://domain name:HTTPS port. Example:

https://test09.myipcamera.org:443.

8.4 Smartphone Access of the Camera

1. Search and install [IPCam_Viewer] on the App Store for iOS®devices; search and install

[IPCam Viewer] on the Google Play Store for Android®devices.

2. Make sure to connect your smartphone to the router.

3. Run the app and go to the [IPC Management] page. Click the [QR Scan] button.

Click [IPC] and then click [QR Scan].

4. Enter the username and password, and click [OK] to confirm.

Input the username and password.

5. The camera appears in the list. Click it to see the live video.

Inhaltsverzeichnis

Sprachen:

Andere Velleman Sicherheitskamera Handbücher

Velleman

Velleman Camcolbul29 Bedienungsanleitung

Velleman

Velleman CAMIP6 Bedienungsanleitung

Velleman

Velleman CAMZWMBLAH2N Bedienungsanleitung

Velleman

Velleman CAMCOLBUL2 Bedienungsanleitung

Velleman

Velleman CAMCOLD1 Bedienungsanleitung

Velleman

Velleman CAMTVI6 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL11 Bedienungsanleitung

Velleman

Velleman CAMTVI11N Bedienungsanleitung

Velleman

Velleman CAMTVI13 Bedienungsanleitung

Velleman

Velleman CAMCOLD26 Bedienungsanleitung

Velleman

Velleman CAMIP1 Bedienungsanleitung

Velleman

Velleman CAMCOLD12N Bedienungsanleitung

Velleman

Velleman CAMCOLD11 Bedienungsanleitung

Velleman

Velleman CAMCOLD4 Bedienungsanleitung

Velleman

Velleman CAMCOLBBUL16N Bedienungsanleitung

Velleman

Velleman CAMCOLD19 Bedienungsanleitung

Velleman

Velleman CAMMCOLD11N Bedienungsanleitung

Velleman

Velleman CAMCOLD5 Bedienungsanleitung

Velleman

Velleman CAMCOLBUL26 Bedienungsanleitung

Velleman

Velleman CAMCOLD16 Bedienungsanleitung

Velleman

Velleman CAMCOLD16H Bedienungsanleitung

Velleman

Velleman CAMCOLD12N1 Bedienungsanleitung

Velleman

Velleman EtiamPro ECAMIP701 Bedienungsanleitung

Velleman

Velleman CAMTVI4 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung