Vendlet V5 Leitfaden

USING THE VENDLET SYSTEM AS SIDE RAILS

HOW TO USE SIDE RAILS

Vers. 4.0

VENDLET

V5 and V5+

T: +45 9631 0050 • M: vendlet@vendlet.dk • W: vendlet.com

When the VENDLET is being used as side rails, the bars must be raised to secure

a distance between the surface of the mattress and the upper edge of the bars of

min. 22 cm.

Install the plastic plates before leaving the patient unattended in bed. Use two

plastic plates on each bar. If the head end or foot end of the bed will be raised

while the patient occupies the bed, the plastic plates at that end must be removed.

NOTE!

If VENDLET is not to function as side rails, the bars must

be lowered before leaving the patient.

Scan the QR code

to watch instruction

videos

HOW TO ATTACH THE PLASTIC PLATES

1. Adjust the height of the bed to ensure a correct work posture.

2. Press the and buttons to slacken the turning sheet enough to insert

the plastic plates between the mattress and the support bar as shown in the

ﬁgure.

3. When the plastic plates are inserted between the mattress and

the support bar, the spacer at the bottom of the plastic plate must

press against the headboard and footboard. This position ensures

that the ﬁngers of the patient will not get caught.

4. The plastic plates are attached by pressing them down over the bars; the

easiest way is to do it one bracket at a time. Start with the bracket closest to

the headboard or footboard and press it down over the bar.

5. Always remember to attach the foot end plastic plate ﬁrst,

followed by the head end plastic plate, as this prevents the patient

from getting his/her hand or similar caught in the overlap between

the two plastic plates.

HOW TO REMOVE THE PLASTIC PLATES

HOW TO USE SIDE RAILS

Vers. 4.0

Scan the QR code

to watch instruction

videos

VENDLET

V5 and V5+

T: +45 9631 0050 • M: vendlet@vendlet.dk • W: vendlet.com

NOTE!

If VENDLET is to function as side rails, the plastic plates

must be used to ensure that VENDLET fulls all require-

ments to side rails.

Vendlet ApS shall not be liable if the plastic plates and

support bars are not used on beds with raised bars where

patients are left unattended.

1. Adjust the height of the bed to ensure correct work posture when the plastic

plates are removed from the bars.

2. Remove the plastic plates by grabbing them by the side and pulling upwards,

slightly slanted.

3. The plastic plates may break if they get caught. Consequently, plastiv plates

not in use should always hang on the support bar under the bars.

If the plastic plates are not used when the bars are raised, there is a risk that:

• The gap between the headboard/footboard and the VENDLET will

exceed 6 cm which could cause the patient to get pinned between

the parts.

• The distance between the bed frame and the lower edge of the bar

will exceed 12 cm. This could cause the patient to fall through this

opening, head or feet ﬁrst, with a risk of getting pinned between the

parts.

Andere Handbücher für V5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vendlet Medizinische Geräte Handbücher

Vendlet

Vendlet V5S Speed Adjust Bedienungsanleitung

Vendlet

Vendlet Lejrelet Oval Bedienungsanleitung

Vendlet

Vendlet STANDARD Bedienungsanleitung

Vendlet

Vendlet V5 Bedienungsanleitung

Vendlet

Vendlet BASIC Bedienungsanleitung

Vendlet

Vendlet V5S Speed Adjust Bedienungsanleitung

Vendlet

Vendlet STANDARD Bedienungsanleitung

Vendlet

Vendlet V5 Bedienungsanleitung

Vendlet

Vendlet V5S Speed Adjust Bedienungsanleitung

Vendlet

Vendlet BASIC Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

FujiFilm

FujiFilm Sonart Betriebsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung