4VUT .. PE EC
INTRODUCTION
This user’s manual includes technical description, operation, installation and mounting guidelines, technical data for the heat
recovery air handling unit VUT PE EC, hereinafter referred as the unit.
USE
Unit - 1 item
Control panel - 1 item
User’s manual for the air handling unit - 1 item
User’s manual for the control panel - 1 item
Packing box 1 item
Outdoor temperature sensor - 1 item.
DESIGNATION KEY
DELIVERY SET
Control panel
____ — PU SENS 01 with a sensor display
A7 — PU JK 01 with LCD display
Service side
L - left service side
R - right service side
Motor type
EC - electronically commutated motor
Heater type
E - electric heater
Unit type
VUT - heat recovery ventilation
Mounting option
P - suspended mounting
Air capacity [m3/h]
VUT ХХХ PE ЕС Х Х
THE UNIT SHOULD NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED
PHYSICAL, MENTAL, OR SENSORY CAPACITIES, OR THOSE WITHOUT
THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED
ACCESS BY UNATTENDED CHILDREN.
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafés, conference halls, and other
utility and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the
filtered stream of supply air.
The unit is not intended for organizing ventilation in swimming pools, saunas, greenhouses, summer gardens, and other spaces
with high humidity.
Due to the ability to save heating energy by means of energy recovery, the unit is an important element of energy-efficient
premises.
The unit is a component part and is not designed for stand-alone operation.
It is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous
materials, coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic
substances, dust, pathogenic germs).
Relative humidity of transported air must not exceed 80 % at an ambient temperature of +20 °C.
