
5
INTRODUCTION
This user’s manual includes technical description, operation, installation and mounting guidelines, technical data for the heat
recovery air handling unit VENTS VUT PE EC, hereinafter referred as the unit.
USE
The unit with heat recovery and electric heater is designed to save heat energy by means of heat recovery and is one of the energy
saving components used in the buildings and premises. VUT PE EC is a component unit and is not designed for independent operation.
The unit is designed to provide permanent controlled air exchange by means of mechanical ventilation in houses, oces, hotels,
cafés, meeting halls and other mechanically ventilated premises as well as utilization of extract air heat energy to warm up supply
puried air.
Transported air must not contain any ammable or explosive mixtures, evaporation of chemicals, coarse dust, soot and oil particles,
sticky substances, brous materials, pathogens or any other harmful substances.
Unit - 1 item
Control panel - 1 item
User’s manual for the air handling unit - 1 item
User’s manual for the control panel - 1 item
Packing box 1 item
Outdoor temperature sensor - 1 item.
DESIGNATION KEY
DELIVERY SET
Control panel
____ — PU SENS 01 with a sensor display
A7 — PU JK 01 with LCD display
Service side
L - left service side
R - right service side
Motor type
EC - electronically commutated motor
Heater type
E - electric heater
Unit type
VUT - heat recovery ventilation
Mounting option
P - suspended mounting
Air capacity [m/h]
VUT PE
TECHNICAL PARAMETERS
The unit is designed for indoor application with the ambient temperature ranging from +1 °C up to +40 °C and relative humidity up
to 80%.
The unit is classied as a class I electric appliance.
Hazardous parts access and water ingress protection standard:
IP 44 for the unit motors;
IP 22 for the assembled unit connected to the air ducts.
The unit design is regularly being improved, so some models can slightly dier from those ones described in this manual.
THE UNIT IS NOT INTENDED TO BE USED BY CHILDREN, PHYSICALLY OR MENTALLY DISABLED PERSONS, PERSONS
WITH SENSORY DISORDER, PERSONS WITH NO APPROPRIATE QUALIFICATION.
ANY OPERATIONS WITH THE UNIT MUST BE PERFORMED ONLY BY PROPERLY QUALIFIED PERSONNEL AFTER THE
APPROPRIATE SAFETY BRIEFING.
THE UNIT INSTALLATION SITES MUST PREVENT ACCESS BY UNATTENDED CHILDREN.