Vents 100 Style Eco Bedienungsanleitung

AXIAL FAN

User’s manual

www.ventilation-system.com

100 Style Eco

CONTENTS

Delivery set.............................................................................................................................................................................................................................................6

Brief description .................................................................................................................................................................................................................................. 6

Operation guidelines .......................................................................................................................................................................................................................6

Designation key................................................................................................................................................................................................................................... 7

Installation and set-up..................................................................................................................................................................................................................... 7

Connection to power mains ....................................................................................................................................................................................................... 8

Fan control.............................................................................................................................................................................................................................................. 9

Maintenance..........................................................................................................................................................................................................................................22

Storage and transportation regulations............................................................................................................................................................................... 22

Manufacturer’s warranty................................................................................................................................................................................................................23

This user’s manual is a main operating document, intended for technical, maintenance, and operating staﬀ.

The manual contains information about the purpose, technical details, operating principle, design, and installation of the

100 Style Eco unit and all of its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems and should

be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the

territory of the country.

The information in this user’s manual was correct at the time of the document’s preparation.

The Company reserves the right to modify the technical characteristics, design, or conﬁguration of its products at any time

in order to incorporate the latest technological developments.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means in any

information search system or translated into any language in any form without the prior written permission of the Company.

READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.

COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG

SERVICE LIFE OF THE UNIT.

KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO RE-

READ THE INFORMATION ON THE PRODUCT SERVICING.

FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND

TROUBLE-FREE OPERATION OF THE UNIT.

Disconnect the unit from power supply prior to any connection, servicing, maintenance, and repair

operations.

Only qualied electricians with a work permit for electrical units up to 1000 V are allowed

for installation and maintenance. The present user’s manual should be carefully read

before beginning works.

• Single-phase power mains must comply with the acting local electrical norms and standards.

• Fixed electrical wiring must be equipped with an automatic circuit breaker.

• The unit must be connected to power mains through a QF automatic circuit breaker integrated

into the ﬁxed wiring system. The gap between the circuit breaker contacts on all poles must be

not less than 3 mm. Check the unit for any visible damages of the impeller and the casing before

starting installation. The casing internals must be free of any foreign objects that can damage the

impeller blades.

• While mounting the unit, avoid compression of the casing! Deformation of the casing may result

in the motor jam and noisy operation. Misuse of the unit and any unauthorised modiﬁcations are

not allowed.

• Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into

the room through open chimney ﬂues or other ﬁre-protection devices. Suﬃcient air supply must

be provided for proper combustion and exhaust of gases through the chimney of fuel burning

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED MUNICIPAL WASTE.

equipment to prevent back drafting. Transported air must not contain any dust or other solid

impurities, sticky substances, or ﬁbrous materials.

• Do not use the unit in a hazardous or explosive environment containing spirits, gasoline,

insecticides, etc.

• Do not close or block the intake or extract vents in order to ensure the eﬃcient air ﬂow.

• Do not sit on the unit and do not put objects on it.

• The unit is allowed to be used by children aged from 8 years old and above and persons with

reduced physical, sensory, or mental capabilities or no experience and knowledge provided that

they have been given supervision or instruction regarding safe use of the unit and understand

the risks involved.

• Do not allow children to play with the unit.

BRIEF DESCRIPTION

The unit described herein is an axial fan for exhaust ventilation of small to medium-sized premises heated during winter.

The fan ﬁts 100 mm air ducts.

OPERATION GUIDELINES

The fan is connected to 100...240 V/50 (60) Hz single-phase AC mains and is designed for continuous operation without

disconnection from the electric mains. Air motion direction in the system must match the pointer on the fan casing. The fan

is designed for indoor application with the ambient temperature ranging from +1 °C up to +45 °C.

Ingress protection rating against access to hazardous parts and water ingress is IP44.

The fan design is regularly improved, so some models may slightly diﬀer from those ones described herein.

DELIVERY SET

Fan — 1 pc.

Screws and dowels — 4 pcs.

Plastic screwdriver — 1 pc.

User’s manual — 1 pc.

Packing box — 1 pc.

INSTALLATION AND SET-UP

The fan is designed for wall mounting with direct air exhaust to the ventilation shaft or into the round air duct of matching

diameter. Fan installation with direct air discharge upwards is not allowed (Fig. 2).

Fan installation sequence:

Step 1. Cut oﬀ power supply and make sure electricity has been turned oﬀ (Fig. 3).

Step 2. Run the power cable to the vent hole (Fig. 4).

Step 3. Remove the front panel from the fan (Fig. 5).

Step 4. Mark and drill holes for mounting the fan and then install the fan (Fig. 6-8).

Step 5. Remove the two ﬁxing screws that retain the cover to enable access to the terminals. Route the power cable as

shown in Fig. 9 and connect the fan to power mains in compliance with the external wiring diagram, see page 8. Fix the

power cable and the signal cables with a cable clamp. After completion of the electrical connection re-install the cover in

site.

Step 6. Install the cover and the front panel back to the fan casing (Fig. 10).

Step 7. Supply power voltage to the fan (Fig. 11).

DESIGNATION KEY

100 Style Eco LED

Backlight of the unit’s interior

(only for the fans with the LED option)

Fan series

Outlet duct diameter [mm]

CONNECTION TO POWER MAINS

The fan is rated for connection to single-phase AC 100-240 V/50 (60) Hz

power mains.

For electric installations use insulated, durable and heat-resistant electric

leads (cables, conductors) with the minimum cross section 0.5 up to

0.75 mm² for the power cable and 0.25 mm² for the control cables.The cable

cross-section is given for reference only.

Use copper wires for all the electric connections! Connect the unit to power

mains via the terminal block in compliance with the wiring diagram and

terminal designation.

Connect the unit to power mains through the external automatic circuit

breaker with a magnetic trip integrated into the ﬁxed wiring system.

DISCONNECT THE UNIT FROM POWER MAINS PRIOR TO ANY OPERATIONS. THE UNIT MUST

BE CONNECTED TO POWER MAINS BY A QUALIFIED ELECTRICIAN. THE RATED ELECTRICAL

PARAMETERS OF THE UNIT ARE GIVEN ON THE MANUFACTURER’S LABEL.

SQF

WIRING DIAGRAM

TERMINAL DESIGNATIONS ON THE WIRING DIAGRAM

L — phase

N— 0

LT — fan speed control circuit

QF — automatic circuit breaker

S — switch for speed change

FAN CONTROL

The fan is controlled by the application on the mobile device. The application is available for download at App Store, Play

Market or via the QR code.

App Store download link Play Market download link

Your mobile device must have an operating system matching the following parameters:

• iOS – 7 or later. Compatible with iPhone, iPad, iPod.

• Android – 4 or later.

By default, the fan operates as a Wi-Fi access point. After installing the application,

connect the mobile device to the fan as to a Wi-Fi access point (FAN: + 16 characters

of the ID number) indicated on the control board and on the fan casing.

Wi-Fi access point password: 11111111.

Run the installed application on the mobile device connected to the fan. When

starting the application, a message on the absence of communication with the fan

appears on the screen if the device is not connected to the fan.

SETTING CONNECTION WITH THE APP

Select a desired connection type.

1. Enter the app menu.

2. Select Connection-Connection list.

3. If the fan is operating in Wi-Fi access point mode, select the Default connection. Connection is initiated automatically.

4. If the fan is connected to a home Wi-Fi network, search for devices on the network.

5. In the list, you will see a connection with the ID number of the fan. Highlight it.

6. If necessary, change the connection name.

7. Save the updated details.

4 6

Andere Handbücher für 100 Style Eco

Inhaltsverzeichnis

Andere Vents Lüfter Handbücher

Vents

Vents Solo RA1-35A-9 P Bedienungsanleitung

Vents

Vents KSK Series Bedienungsanleitung

Vents

Vents VKV Series Bedienungsanleitung

Vents

Vents M1 Series Bedienungsanleitung

Vents

Vents Solid Bedienungsanleitung

Vents

Vents VN Series Bedienungsanleitung

Vents

Vents 150 Quiet T Bedienungsanleitung

Vents

Vents TwinFresh Comfo SA-50 Bedienungsanleitung

Vents

Vents VKP SERIES Bedienungsanleitung

Vents

Vents VS 355 4E Bedienungsanleitung

Vents

Vents HBF Series Bedienungsanleitung

Vents

Vents ICF Series Bedienungsanleitung

Vents

Vents TwinFresh Expert Bedienungsanleitung

Vents

Vents TwinFresh Comfo RA-25 Bedienungsanleitung

Vents

Vents Quiet Bedienungsanleitung

Vents

Vents VKMz 125 Bedienungsanleitung

Vents

Vents VKV Series Bedienungsanleitung

Vents

Vents TT PRO Series Bedienungsanleitung

Vents

Vents Alta 100 Bedienungsanleitung

Vents

Vents VKMz 100 Bedienungsanleitung

Vents

Vents TwinFresh Atmo Wi-Fi Bedienungsanleitung

Vents

Vents VOX-M Bedienungsanleitung

Vents

Vents VKMz 100 Bedienungsanleitung

Vents

Vents iFan Celsius Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung