Vents VENTS TT Series Bedienungsanleitung

CENTRIFUGAL INLINE FAN

USER’S MANUAL

www.ventilation-system.com

CONTENTS

Delivery set ...............................................................................................................................................................................................................6

Brief description ....................................................................................................................................................................................................6

Fan modiﬁcations .................................................................................................................................................................................................6

Operation guidelines ..........................................................................................................................................................................................7

Designation key ....................................................................................................................................................................................................8

Mounting ..................................................................................................................................................................................................................9

Maintenance ...........................................................................................................................................................................................................12

Transportation and storage rules ................................................................................................................................................................12

Manufacturer’s warranty...................................................................................................................................................................................13

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation

of the TT unit and all its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems

and should be able to work in accordance with workplace safety rules as well as construction norms and

standards applicable in the territory of the country.

All user’s manual requirements as well as the provisions of all the

applicable local and national construction, electrical, and technical

norms and standards must be observed when installing and

operating the unit.

Disconnect the unit from the power supply prior to any connection,

servicing, maintenance, and repair operations.

Only qualied electricians with a work permit for electrical units

up to 1000 V are allowed for installation and maintenance. The

present user’s manual should be carefully read before beginning

works.

• Check the unit for any visible damage of the impeller, the casing,

and the grille before starting installation. The casing internals must

be free of any foreign objects that can damage the impeller blades.

• While mounting the unit, avoid compression of the casing!

Deformation of the casing may result in motor jam and excessive

noise.

• Misuse of the unit and any unauthorised modiﬁcations are not

allowed.

• Do not expose the device to adverse atmospheric agents (rain, sun,

etc.).

• Transported air must not contain any dust or other solid impurities,

sticky substances, or ﬁbrous materials.

• Do not use the unit in a hazardous or explosive environment

containing spirits, gasoline, insecticides, etc.

• Do not close or block the intake or extract vents in order to ensure

the eﬃcient air ﬂow.

• Do not sit on the unit and do not put objects on it.

• The information in this user’s manual was correct at the time of the

document’s preparation.

• The Company reserves the right to modify the technical

characteristics, design, or conﬁguration of its products at any time in

order to incorporate the latest technological developments.

WARNING! Similar to the use of any other household electrical

appliances when operating this fan, the following basic rules

must be followed:

• Never touch the unit with wet or damp hands.

• Never touch the unit when barefoot.

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure that they do not play with

the appliance.

The connection to the supply mains must be made through a

means of disconnection, which is incorporated in the ﬁxed wiring in

accordance with the wiring rules, and has a contact separation in all

poles that allows for full disconnection under overvoltage category III

conditions.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC WASTE.

If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent, or similarly qualiﬁed persons in order

to avoid a safety hazard.

If the cord set is damaged, it must be replaced by a special cord set

available from the manufacturer or its service agent.

CAUTION: In order to avoid a safety hazard due to inadvertent

resetting of the thermal cut-out, this appliance must not be supplied

through an external switching device, such as a timer, or connected

to a circuit that is regularly switched on and oﬀ by the utility.

Ensure that the appliance is switched oﬀ from the supply mains

before removing the guard.

Precautions must be taken to avoid the back-ﬂow of gases into the

room from the open ﬂue of gas or other fuel-burning appliances.

DELIVERY SET

Fan: 1 pc.

Screws and dowels: 4 pcs.

User’s manual: - 1 pc.

Packing box: 1 pc.

BRIEF DESCRIPTION

The unit described herein is an mixed-ﬂow fan for supply or exhaust ventilation of premises.

The fan are designed for connection to Ø 4”, 5”, 6”, 8”, 10”, 12 3/8” ducts.

FAN MODELS

VENTS TT XXX: basic model contains 2-speed-switch and power cord

XXX: spigot diameter, mm

OPERATION GUIDELINES

The fan is rated for connection to single-phase ac 120 V/60 Hz power mains.

The unit is rated for continuous operation.

The unit is rated as a Class II electrical appliance.

The arrow on the fan casing must match the air direction in the system.

Ingress protection rating against access to hazardous parts and water ingress is IPX4.

The fan is rated for operation at the ambient air temperature from +34 °F up to +104 °F.

Transported air temperature — from -13 °F up to +140 °F.

Ø D B H L

TT 100 3 3/4” 6 9/16” 7 1/2” 9 11/16”

TT 125 4 13/16” 6 9/16” 7 1/2” 9 11/16”

TT 150 5 3/4” 8 3/4” 9 13/16” 11 5/8”

TT 200 7 13/16” 9 7/16” 10 1/4” 11 5/8”

TT 250 9 3/4” 11 5/16” 12 11/16” 15 1/16”

TT 315 12 3/8” 14 1/4” 16 1/16” 22 15/16”

MOUNTING

The fan is designed for horizontal or vertical installation on the ﬂoor, on the wall or on the ceiling (Fig. 1). The

fan can be installed independently or as part of a set with parallel or in-series connection (Fig. 2).

To be installed on the intake spigot side:

• 3.28 ft long air duct in case of horizontal fan installation

• ventilation hood in case of vertical fan installation

The exhaust spigot must always be connected to the air duct.

The fan mounting steps are shown in Fig. 3–10.

MAINTENANCE

Clean the fan surfaces of dirt and dust each 6 months (Fig. 11–17).

Disconnect the fan from power supply prior to any maintenance operations.

For cleaning the fan use a soft cloth or a brush wetted in a mild detergent solution.

Avoid water dripping on the electric components (Fig. 16)!

Wipe the fan surfaces dry after cleaning.

STORAGE AND TRANSPORTATION REGULATIONS

• Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with

temperature range +41...+104 °F and relative humidity up to 70 %.

• Storage environment must not contain aggressive vapors and chemical mixtures provoking corrosion,

insulation, and sealing deformation.

• Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.

• Follow the handling requirements applicable for the particular type of cargo.

• The unit can be carried in the original packaging by any mode of transport provided proper protection

against precipitation and mechanical damage. The unit must be transported only in the working position.

• Avoid sharp blows, scratches, or rough handling during loading and unloading.

• Prior to the initial power-up after transportation at low temperatures, allow the unit to warm up at operating

temperature for at least 3-4 hours.

MANUFACTURER’S WARRANTY

Production meets standard operating requirements in the USA and Canada.

Vents US warrants to the original purchaser of the unit that it will be free from defects in materials or workmanship

for a period of 60 months from the date of original purchase. The Vents US warrants to the original purchaser

of the unit that the integrated control unit will be free from defects in materials and workmanship for a period

of 60 months from the date of original purchase.

THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During the stated warranty period, Vents US will, at its option, repair or replace, without charge, any product

or part which is found to be defective under normal use and service. This warranty does not cover (a) normal

maintenance and normal service or (b) any products or parts which have been subject to misuse, negligence,

accident, improper maintenance or repair (other than by Vents US), faulty installation or installation contrary to

recommended installation instructions. Labor to remove and replace products is not covered. The duration of

any implied warranty is limited to the time period speciﬁed for the express warranty. Some states do not allow

limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

VENTS US OBLIGATION TO REPAIR OR REPLACE, AT VENTS US OPTION, SHALL BE THE PURCHASER’S

SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. VENTS US SHALL NOT BE LIABLE FOR

INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH

PRODUCT USE OR PERFORMANCE.

Andere Handbücher für VENTS TT Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vents Lüfter Handbücher

Vents

Vents VKMz 100 Bedienungsanleitung

Vents

Vents Solo RA1-35-9 R Bedienungsanleitung

Vents

Vents 100 Ace Bedienungsanleitung

Vents

Vents VK EC Series Bedienungsanleitung

Vents

Vents TT Silent-M 450-4E Bedienungsanleitung

Vents

Vents VKP Bedienungsanleitung

Vents

Vents Solo RA1-35 R Bedienungsanleitung

Vents

Vents SO Series Bedienungsanleitung

Vents

Vents VKM Series Bedienungsanleitung

Vents

Vents VKM 100 Bedienungsanleitung

Vents

Vents SERIES Bedienungsanleitung

Vents

Vents TwinFresh Expert RW-30 V.2 Bedienungsanleitung

Vents

Vents KSK Series Bedienungsanleitung

Vents

Vents iFan Wi-Fi Bedienungsanleitung

Vents

Vents D Series Bedienungsanleitung

Vents

Vents VKP PS 125 Bedienungsanleitung

Vents

Vents CBF LP 110 DC Bedienungsanleitung

Vents

Vents KSB Bedienungsanleitung

Vents

Vents KSB315R1 Bedienungsanleitung

Vents

Vents KSB EC Series Bedienungsanleitung

Vents

Vents VKV EC Series Bedienungsanleitung

Vents

Vents VDK Series Bedienungsanleitung

Vents

Vents 100 Style Eco Bedienungsanleitung

Vents

Vents TT Silent-M Series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung