VEVOR EV-B06-US003A Bedienungsanleitung
Technical Support and E-Warranty Certificate www.vevor.com/support
AC EV CHARGER
USR MANUAL
MODEL:EV-B06-US003A/EV-B06-US003B/EV-B06-US007B
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
- 1 -
MODEL:EV-B06-US003A/EV-B06-US003B/EV-B06-US007B
EV-B06-US003A
EV-B06-US003B
EV-B06-US007B
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
AC EV CHARGER
- 2 -
Before the operation, please read the operation manual carefully to
know the equipment and the correct method of use. Please keep it for
future reference.
SAFETY PRECAUTIONS
1. Before installation, please check the grid for single-phase 230 v ±10%
(50 Hz)". Otherwise unable to use it.
2. Detection of the charging device has the function of user network circuit
load capacity; When the electric grid circuit of the user cannot bear the
charging power of the charging device, the device will automatically reduce
the charging power and then charge the electric vehicle. This function can
solve the problem of frequent tripping caused by the user's grid voltage
instability, circuit aging and other problems; At the same time, it can reduce
the safety problems caused by the user's circuit problems. If the charging
power is reduced in use, it is a normal phenomenon.
3. This equipment has over-voltage, under-voltage protection; It also has
overload protection function. After the device automatically adjusts the
charging power, the device will automatically shut down the charging and
stop using if the user's grid voltage is still abnormal.
4. Install the equipment, the total input of the front-end must be installed
circuit breakers.
5.Do not use flammable,explosive, or combustible materials, chemicals,
combustible gas and other dangerous goods near the charging pile.
- 3 -
6. Keep dry and clean on the charging point. If there is any dirt, please use
a clean, dry cloth to wipe it. It is forbidden to touch the point pin.
7. Hybrid car, please recharge again after flame out. In the process of
charging, vehicle driving is prohibited.
8. Children do not get close to the process of charging so as not to cause
harm.
9.In case of rain, thunder, or weather, be a cautious charge, please.
10. It is strictly prohibited that the charging cable breaks, wear and tear,
charging cable nudity, charging pile has obviously been knocked down,
damaged, etc. If the charging post is used, please stay away from the
charging post immediately and contact the staff.
11. If there is a fire in the process of charging electric shock and other
abnormal situation occurs, immediately press the stop button to ensure
personal safety.
12. Please do not try to remove, maintain, or modify the charging
pile.Improper use may cause damage, leakage, and so on and so forth.
PRODUCT INTRODUCTION
EV-B06-US series portable charger is designed for the pain points in the
portable charging industry. It is characterized by convenient installation,
use, and debugging, simple operation and maintenance, accurate
measurement, and complete protection functions. It has good compatibility,
and meets the charging requirements of national standard.
EV-B06-US series portable charger has a protection level of IP66, and has
good dustproof and waterproof functions, enabling safe indoor and outdoor
operation.
- 4 -
1. Product Parameters
Type no.
EV-B06-US003A
EV-B06-US003B
EV-B06-US007B
In put voltage
AC 120V or
AC 240V
AC 240V
AC 240V
Ou tput voltage
AC 120V or
AC 240V
AC 240V
AC 240V
Power output
3.8KW
7.7kw
Maximum
output current
16A
32A
Class of
protection
IP66
Protection
Function
Fire protection, over current, over voltage, under voltage, ground protection,
over temperature protection, self monitoring and recovery,
Indicator light
Standby - Green on; Charging - Yellow blinking; Alarm - red on
Liquid crystal
screen
3*LED light indicator
3*LED light indicator
3*LED light indicator
1.5-inch LCD
Mode of
charging
Plug and Play/APP charging
Charging
interface
SAE J1772
Input plug
NEME 6-20P
NEME 10-30P
NEME 14-50P
Material of
case
PC+ABS
Operating
temperature
-30~45°C
Relative
humidity
5% to 95% no condensation
Overall
dimensions
245*105*63mm(H*W*D)
Standard of
reference
CCS1 (combo/Type 1)
AC Level 1 and 2
charging
CCS1 (combo/Type 1) AC Level 2 charging
- 5 -
QUIPMENT INSTRUCTIONS
2. After the device is powered on, it enters the standby state. The device
standby interface is shown below:
2.1 After inserting the charging gun head into the vehicle charging port,
the charging interface is shown below:
2.2 Adjust the charging current: click the button to adjust the
charging gear:16A-13A-10A-8A-16A Cycle the current in this order.After
switching the usage current, plug in the gun head to charge.
- 6 -
2.3 Appointment charging: Click to increase the reservation time.You
can choose between 0 and 12H.After the appointment time, it will
automatically enter the charging state.All models included in this manual
can be charged by APP Appointment charging.
OBILE PHONE APP CHARGING OPERATION INSTRUCTIONS
3. APP download and binding use
a. To download the smart APP, enter the following address in the mobile
browser:
https://developer.tuya.com/cn/docs/iot/tuya-smart-app-smart-life-app-adva
ntages?id=K989rqa49rluq
Click the website and follow the prompts to install.
b. Qr code download：
Open the mobile browser or other social software, scan the QR code, and
- 7 -
follow the APP according to the prompts.
3.1 Binding and Using Devices
Open the installed APP, click Agree privacy Statement, you can register
with your mobile phone number, social software binding registration, and
log in to the APP after a successful registration.
Long press A on the charging panel, and APP START appears on the
display screen to enter the APP mode;
Press and hold on the charging panel again, and the display screen will
display Plug and Charge to enter the Plug and Play charging mode. Open
the Location, Bluetooth, and Wifi of the mobile phone. If the charging
device is in standby state, the APP will automatically search for the
charging device and the device name will be displayed.
- 8 -
c. Click Add to add the device, enter the WIFI pairing interface,
automatically identify the WIFI name of the phone.Click Next, and the
device will be automatically bound. After the binding is successful, a
message will be displayed indicating that the device has been successfully
added. Finally, click the icon of "Finish" and wait about 5 seconds for the
device to be bound.
d. You can also click "+" in the upper right corner of the APP to manually
add the device, select the category of "Energy saving" in the left column,
pull up the device type, find the device "Car charging pile (Bluetooth +
WIFI)", click to enter, and then click "Confirm indicator flashing" and "Fast
flashing" as prompted. Enter the WIFI password (WIFI password
connected to the mobile phone) and click Next to match the password, and
always set the bound device as prompted. After binding the device, charge
it according to the APP interface.
e. Device WIFI is reset：
EV-B06-US
003A and
EV-B06-US
003B
Press both and buttons on the
lower panel simultaneously for 3 seconds
device display panel for 3 seconds ，After
waiting for the display screen to display WIFI
Reset, the device's WiFi will be reset.
Under the WiFi reset
interface, simultaneously
press the and
buttons on the device panel
for 2 seconds to return to the
device status interface.
EV-B06-EU
007B
Press both and buttons on the
lower panel simultaneously for 3 seconds
device display panel for 3 seconds ，After
waiting for the display screen to display WIFI
Reset, the device's WiFi will be reset.
Under the WiFi reset
interface, simultaneously
press the and
buttons on the device panel
for 2 seconds to return to the
device status interface.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere VEVOR Autozubehör Handbücher
VEVOR
VEVOR Type 1 Portable Charger Bedienungsanleitung
VEVOR
VEVOR RB033 Bedienungsanleitung
VEVOR
VEVOR HL10000 Bedienungsanleitung
VEVOR
VEVOR 16A-TYPE2 Bedienungsanleitung
VEVOR
VEVOR BYCD-002 Bedienungsanleitung
VEVOR
VEVOR 15A-TYPE1 Bedienungsanleitung
VEVOR
VEVOR COV-22 Bedienungsanleitung
VEVOR
VEVOR XMS-1 Bedienungsanleitung
VEVOR
VEVOR CB1203S Bedienungsanleitung
VEVOR
VEVOR TYGJ0062 Bedienungsanleitung
