Vicon HPOE-100 Bedienungsanleitung

HPOE-100

Network Camera Housing

INSTALLATION GUIDE

1.

Mounting Configuration and Dimensions

2.

Component Description

1

January 2016

3.

Power Consumption

D-Fog Heater

Always On (9W)

Heater

15°C On, 25°C Off (10W)

IR LEDs

3W

4.

Installation Recommendations

If you plan to install this camera enclosure into a tropical, sea coastal, or an environment where salt

water or corrosive industrial waste water/moist are present, please seal each stainless steel screws

and fittings with a silicon grease compounds. This will help prevent electrolysis to occur and extend

the life span of the camera and housing.

5.

Installation

A.

Prepare a CAT5e Ethernet cable. Pass it through the waterproofconnectors.

B.

You may need to remove the RJ45 connector, and use a crimping tool to connect the

Ethernet wires to an RJ45 connector inside the enclosure. Use an Ethernet cable ofthe

width of 5 ~ 6.5mm.

2

January 2016

C.

When done, tighten up the waterproof connectors.

D.

Align the buffer pad with the mounting hole at the bottom of the camera

E.

Place the mounting plate on top of buffer pad and then secure it to the camera. You may need

adjust its position so that the lens module can flush align with the tempered glass.

F.

Secure the camera to the enclosure by securing screws through the keyholeslots.

3

January 2016

G.

Connect PoE input to the power unit. Connect a short Ethernet cable between thePoE

output and the Ethernet port on the camera. If using the media converter, connect the

wires to the 12V output on the PSU unit.

H.

Connect the day/night signal lines from the IR unit to the relay connectors on the

camera's terminal block. The day/night mode relay connection enables the

synchronization of IR light and the automated day/night switching mechanism onthe

camera.

I.

Having the wiring done inside the enclosure, you can install the enclosure bracket to a

preferred location at your installation site. Drill mounting holes and a cable routing hole(if

preferred) on a wall. Install the bracket.

J.

Lift the whole enclosure up to the installation position, and pass the Ethernetcable

through the bracket.

PoEINfrom

external

PoEOUTto

12VDCOUT

12Vpowertothe

4

K.

Mount the enclosure on to the installed bracket, and secure the connection bytightening

the 4 socket screws. Due to the weight of the enclosure, it is best to have two men

mounting the enclosure.

January 2016

5

Vicon Industries Ltd

www.vicon-security.com

6

January 2016

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon Roughneck V920D Series Bedienungsanleitung

Vicon

Vicon VN-755IP Bedienungsanleitung

Vicon

Vicon V662V-Series Betriebsanleitung

Vicon

Vicon VC355-DSP Bedienungsanleitung

Vicon

Vicon Roughneck V894CSH Series Bedienungsanleitung

Vicon

Vicon I-Onyx MPD-955DN-O Bedienungsanleitung

Vicon

Vicon roughneck V900 Bedienungsanleitung

Vicon

Vicon V662-D-2 Betriebsanleitung

Vicon

Vicon VC2200-12 Benutzerhandbuch

Vicon

Vicon VC-700W Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000 Series Bedienungsanleitung

Vicon

Vicon SurveyorVF SVFT-M Bedienungsanleitung

Vicon

Vicon VC-620 Bedienungsanleitung

Vicon

Vicon VC-632 Bedienungsanleitung

Vicon

Vicon V940B Bedienungsanleitung

Vicon

Vicon V661-N-1 Series Betriebsanleitung

Vicon

Vicon CE102B Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000D Series Bedienungsanleitung

Vicon

Vicon Roughneck AI V2000D Series Bedienungsanleitung

Vicon

Vicon V8360W Series Bedienungsanleitung

Vicon

Vicon V992B-IR4 Bedienungsanleitung

Vicon

Vicon S10-CH Mini Bedienungsanleitung

Vicon

Vicon V992E Bedienungsanleitung

Vicon

Vicon surveyor 2000 XX004 Betriebsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung