Vicon Series 234-00-02 Betriebsanleitung

www.vicon-security.com

Installation and Operation Guide

XX234-00-02

V660B-488IR

High-Resolution Bullet Camera

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet your requirements or that the

operation will be entirely error free or perform precisely as described in the documentation. This system has not been designed

to be used in life-critical situations and must not be used for this purpose.

Vicon Industries Inc., 89 Arkay Drive, Hauppauge, New York 11788

Tel: 631-952-2288 Fax: 631-951-2288 Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON (800-348-4266) UK: 44/(0) 1489-566300

Document Number: 8009-8234-00-02

Product specications subject to change without notice.

Issued: 0512

WARNING

CAUTION

CAUTIONCAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to

the presence of important operating and maintenance (servicing) instructions in the

literature accompanying the product.

Should any liquid or solid object fall into the cabinet,

unplug the unit and have it checked by the qualified

personnel before operating it any further.

Unplug the unit from the wall oulet if it is not going to

be used for several days or more. To disconnect the

cord, pull it out by the plug. Never pull the cord itself.

Allow adequate air circulation to prevent internal heat

build-up. Do not place the unit on surfaces (rugs,

blankets, etc.) or near materials(curtains, draperies)

that may block the ventilation holes.

Height and vertical linearity controls located at the

rear panel are for special adjustments by qualified

personnel only.

Clean the unit with a slightly damp soft cloth.

Use a mild household detergent. Never use

strong solvents such as thinner or benzine as

they might damage the finish of the unit.

Retain the original carton and packing

materials for safe transport of this unit in the

future.

Safety ----------------------------------------- Cleaning --------------------------------------

PRECAUTIONS

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR

MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR

OTHER OPENINGS ON THE EQUIPMENT.

iii

FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL

DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE

LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION

AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS

OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT

GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY

ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH

THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE

TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN

A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL

INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION : CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE

COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN

ICES-003.

NORME NMB-003 DU CANADA.

WARNING

This is a Class A product. In a domestic environment this product

may cause radio interference in which case the user may be required

to take adequate measures.

CE COMPLIANCE STATEMENT

FCC COMPLIANCE STATEMENT

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4 . Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer,

or sold with the apparatus.

When a cart is used,use caution when moving

the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been moisture, does

not operate normally, or has been dropped.

15. CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK

OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER

THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS

UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed

Class 2 power source only.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT : The user of this camera is responsible for checking

and complying with local, state, and federal laws and statutes concerning

the recording and monitoring of audio signals.

The camera provides high-quality images using Sony CCD technology especially

applications.

designed for closed-circuit television (CCTV) and security surveillance

Features:

INTRODUCTION

High resolution and high performance 1/3" Sony Super HAD Technology

Excellent picture quality

600 lines(Color) of resolution

22x Optical Zoom( f=4.1~88mm) Lens F1.6~3.7

Zoom and Focus Control via Remote or Keyboard Controller

0.1 lux(Color), 0 lux(B/W) with LEDs on @ F1.2, 30IRE Sensitivity

shutter modes

Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic

OSD (On Screen Display)

Auto and manual white balance modes

(Digital Wide Dynamic Range)

DWDR

OSD Font Color ( 16 Color)

BLC (Back Light Compensation)

Day&Night (Auto / DAY / NIGHT / EXT)

Private Mask (8 position, 16 Colors)

AGC (Auto Gain Control)

MIRROR (ON/OFF)

Motion Detection(4 point)

Zoom Preset 1~5

HLC (High Light Compensation)

DPC (Dead Pixel Cancellation)

IR Range distance up to 60M

RS-485 Control (Compatible with Pelco D and Pelco P protocols)

ALARM External IN / ALARM (Motion) External OUT

Day & Night External Control

Operates in AC24V ± 10% / DC12V ± 10%

Weatherproof housing IP66

Use Certified / Listed Class 2 power source only

Camera Mount : camera mounts directly to the wall or ceiling

CAMERA CONNECTIONS

1. Lens : 22x Optical Zoom( f=4.1~88mm) Lens for wide area monitoring

. Video : BNC connector used to connect the camera to a monitor, switcher, etc.

3. Power : 24V AC input / 12V DC input power source from a DC 12V or AC 24V ac +/-10%

60/50Hz +/-1Hz.

Use Certified/Listed Class 2 power supply transformer only.

If using DC 12V power adaptor, use a power supply capable of supplying 10 Watts.

4. RS 485 CONTROL

GREEN : RS485+

BLUE : RS485 -

5. Day & Night External CONTROL

6. ALARM IN

7. ALARM OUT

8. GROUND

How to Adjust ZOOM /FOCUS

Remote Controller

Insert the din jack of remote controller to the hall of housing

Adjust the zoom using up/down key

Adjust the focus using up/down key

Keyboard controller

Connect the 485(+)(-) of Keyboard controller with 485(+)(-) Terminal Block

Adjust the zoom using tele/wide key

Adjust the focus using near/far key

REMINDER:

Never aim the camera directly into the sun.

GND

ALARM -OUT

AC/DC-

AC/DC+

D/N EXT -IN

ALARM-IN

SUNSHIELD

SUNSHIELD-BOLT SCREWS REMOTE CONTROLLER

CAMERA

Screw Firmly attach the bracket to the wall or ceiling

DIMENSIONS

WATER INGRESS PREVENTION

UNIT : mm (inches)

REMOTE CONTROL PORT CAP

After using the Remote Control cable,

disconnect it and insert the Remote Control Port Cap.

Secure it tightly.

PACKAGE CONTENTS

Caution : This is a sealed camera with no internal

adjustments and as such opening the case may

invalidate the warranty.

(3.4) (6.5)

(10.9)

CAMERA FIXING

CAMERA ADJUSTMENT

REMOTE CONTROL PORT CAP

The camera is supplied with a remote control set up tool. To connect the remote control

to the camera, first remove the Remote control port cap at the rear of the camera:

Use the 3 location holes around the base of

the bracket to secure the camera to a wall or

ceiling using fixing suitable to the type of surface

CAMERA CONNECTION

Connect the remote control using the 6 pin din connector end to the socket within the camera:

Connect the BNC to a set up monitor to view the picture and On Screen Menus.

To Enter the menus press the button on the remote control.

To Navigate the menus, move the button left/Right/Up and Down, press the button to Enter.

END - takes you back a step in the OSD or exits from the OSD

THE DEFINITION OF TERMS

White Balance

Compensates for deviations in the white color caused by changes in the color

temperature of the light source so that the colors are reproduced correctly.

Exposure

Adjusts the images to the optimum brightness.

SHUTTER (Electronic Shutter)

Controls the integration time (exposure) of the photodiode array and reduces blooming,

overexposure, and smear when capturing moving objects.

Flicker (FLC)

Avoids image flicker when there is a discrepancy between current and frequency

AGC (Automatic Gain Control)

Automatically adjusts (boosts) the video signal to the required level to produce a quality

image in low light situations

Back Light Compensation (BLC)

Compensates for the brightness of the subjects with a large amount of background light

that would make it practically impossible to see any details of the subjects. Adjusts the

iris so that a distinctive subject and the background are delivered at the same time.

HLC (High Light Compensation)

When a high-brightness subject is shot, it may not be brought into focus because of the

large surface area over which the high-brightness pixels are spread.

In cases like this, the high-brightness subject can be brought into focus by using this

function.

LENS SHAD. (Lens Shading)

This function is the make brighter image of corner of screen.

Mask

Hides one or more areas that the user does not want to be displayed on screen.

Masks can be set with their own display area, color, darkness and mosaic processing.

Detection

Detects motion within the scene using one of the available methods.

Some methods trigger the Alarm output.

Sharpness

Reducing this parameter adjusts the noise level to smooth out the "noise" caused by

the compression.

Caution should be taken not to reduce it too much, which may result in a blurred image.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon I-Onyx VN-957DN Bedienungsanleitung

Vicon

Vicon Roughneck V920D Series Handbuch

Vicon

Vicon VN-755IP Bedienungsanleitung

Vicon

Vicon VC455-DSP Bedienungsanleitung

Vicon

Vicon I-ONYX MPD-980DN-O Bedienungsanleitung

Vicon

Vicon XX152-02-00 Bedienungsanleitung

Vicon

Vicon Cruiser SN693V Bedienungsanleitung

Vicon

Vicon VC367DSP Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2002D-PTZ Bedienungsanleitung

Vicon

Vicon V840D Series Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000D Series Bedienungsanleitung

Vicon

Vicon VC355-DSP Bedienungsanleitung

Vicon

Vicon VC-632 Bedienungsanleitung

Vicon

Vicon V661D-312N-1 Betriebsanleitung

Vicon

Vicon IX 2000 L Bedienungsanleitung

Vicon

Vicon V662-D Betriebsanleitung

Vicon

Vicon V800D Bedienungsanleitung

Vicon

Vicon V662V-2 Series Betriebsanleitung

Vicon

Vicon V1020-WIR-180 Bedienungsanleitung

Vicon

Vicon Cruiser SN663V Betriebsanleitung

Vicon

Vicon V9360-1 Bedienungsanleitung

Vicon

Vicon XX264-20-00 Bedienungsanleitung

Vicon

Vicon S-10CM Bedienungsanleitung

Vicon

Vicon SN663V-B Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung