Vicon V960D-N312M Gebrauchsanweisung

Quick User Guide V960D Series Indoor Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to “User’s manual”.

1. Check Contents

No. Item Description

1 Network Camera V960D Series (V960D-N312, V960D-N312M,

V960D-N922M, V961D-N312, V961D-N312M,

V961D-N922M, V962D-N312, V962D-N312M,

V962D-N922M,)

2 Software CD User’s Manual, Utility software

3 Quick User Guide This document

4 Accessories Template for installation

Video monitor cable

Tapping Screw 4x30: 2pcs

Anchor: 2pcs

Tapping Screw for middle cover 3x8: 2pcs

Network extension cable

Power cable

2. Physical Description

1. Network (RJ-45 PoE supported)

2. Power (DC12V / AC24V)

3. I/O signal terminal block

-Audio In (Line in)

-Audio Out (Line Out)

-Alarm In (Dry Contact)

-Alarm Out (Relay out [2A:AC120V/DC60V])

Quick User Guide V960D Series Indoor Network Camera

4. Micro SD card (SDHC supported)

5. Reset Button

6. Status LED

7. Video output for service monitor

3. Making Connection

2. Connect Ethernet cable to make

connection to the network hub.

1. If you have external devices such

as sensor or alarms, make connection

from connectors

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

Quick User Guide V960D Series Indoor Network Camera

4. Assign IP address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, please assign IP address

by the following process.

Execute Discovery_Tool.exe. It will search cameras on the network automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Apply” button.

Then double click the camera in the list; Internet Explorer® will open

automatically.

5. Web Browser Connection

Note: The Network camera supports Internet Explorer® 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Quick User Guide V960D Series Indoor Network Camera

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. You must turn Installation Mode Off to use 720p

or 1080p streaming.

For further information on setup, refer to User’s manual on software CD.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon CE202D-WN Bedienungsanleitung

Vicon

Vicon Surveyor 99 Betriebsanleitung

Vicon

Vicon CE202D-N Bedienungsanleitung

Vicon

Vicon CE102D Bedienungsanleitung

Vicon

Vicon Cruiser SN663V-A Betriebsanleitung

Vicon

Vicon V672-PTZ Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Vicon

Vicon XX235-01-01 Betriebsanleitung

Vicon

Vicon I-Onyx VN-957DN Bedienungsanleitung

Vicon

Vicon V662-D Betriebsanleitung

Vicon

Vicon V810B Bedienungsanleitung

Vicon

Vicon SurveyorVFT SVFT-M Bedienungsanleitung

Vicon

Vicon i-onyx MP-980DN Handbuch

Vicon

Vicon V3FCD SERIES Bedienungsanleitung

Vicon

Vicon Surveyor 99 Bedienungsanleitung

Vicon

Vicon V661D-312IR Betriebsanleitung

Vicon

Vicon V922B-W551-A1 Bedienungsanleitung

Vicon

Vicon Cruiser SN693V Bedienungsanleitung

Vicon

Vicon S2000-MSH-HHB Surveyor 2000 Bedienungsanleitung

Vicon

Vicon CRUISER S660V Betriebsanleitung

Vicon

Vicon VC5050-DSP Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000 Series Bedienungsanleitung

Vicon

Vicon V923-N Bedienungsanleitung

Vicon

Vicon V988B Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung