Vicon V682-PTZ Bedienungsanleitung

User Guide

V682-PTZ

Outdoor Analog PTZ Dome Camera

XX307-20-00

Vicon Industries Inc. does not warrant that the functions contained in this equipment will

meet your requirements or that the operation will be entirely error free or perform precisely as

described in the documentation. This system has not been designed to be used in

life-critical situations and must not be used for this purpose.

Document Number: 8009-8307-20-00 Product specifications subject to change without notice.

Vicon Industries Inc.

Tel: 631-952-2288) Fax: 631-951-2288

Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON

(800-348-4266)

UK: 44/(0) 1489-566300

www.vicon-security.com

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO

NOT INSERT ANY METALLIC OBJECTS THROUGH THE

VENTILATION GRILLS OR OTHER OPENINGS ON THE

EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to

the presence of uninsulated “dangerous voltage”

within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle

is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the

appliance.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC INFORMATION: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference

to radio communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003

du Canada.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plug’s,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. CAUTION – THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN

THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU

ARE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed

Class 2 power source only.

5 
Contents 
Chapter 1 — Introduction..................................................................................................6
1.1 Features .............................................................................................................................6
 
Chapter 2 — Installation and Configuration ....................................................................7
2.1 Package Contents..............................................................................................................7
2.2 Mounting the Camera ........................................................................................................ 8
2.2.1 Wall Mounting ............................................................................................................9
2.2.2 Ceiling Mounting .....................................................................................................10 
2.3 Basic Configuration of Dome Camera System .............................................................. 11 
2.4 Setting Dome Camera (DIP Switch) ................................................................................ 12 
2.5 Setting Dome Camera Address (ID)................................................................................13 
2.6 Connections.....................................................................................................................13 
2.7 Getting Started.................................................................................................................14
 
Programming ...................................................................................................................15 
3.1 Dome Camera Selection..................................................................................................15 
3.2 Accessing the On-Screen Menu Utility........................................................................... 15 
3.3 How to Control the On-Screen Menu Utility...................................................................15 
3.4 Auto Scan.........................................................................................................................16 
3.5 Preset ............................................................................................................................... 18 
3.6 Tour................................................................................................................................... 20 
3.7 Pattern ..............................................................................................................................21 
3.8 Privacy Zone .................................................................................................................... 22 
3.9 Camera Menu ...................................................................................................................23 
3.10 Dome Communication...................................................................................................26 
3.11 Alarm...............................................................................................................................26 
3.12 Dome Setup.................................................................................................................... 27
 
Operation..........................................................................................................................33 
     Using a ViconNet VMS ..........................................................................................................33 
     Using a Valerus VMS..............................................................................................................34 
Appendix A — Specifications .........................................................................................35 
Appendix B – Programmed Presets...............................................................................37 
Appendix C — Troubleshooting .....................................................................................38 
 

Chapter 1 — Introduction

1.1 Features

• Built-in optical power zoom camera with True Night Shot function.

• 240 preset positions with the individual camera AE setup.

• 8 tours, consisting of presets, patterns, auto scans and other tours, can be programmed with

over 300 functions and preset locations. While moving, each preset scan can be watched in

smooth Vector Scan mode.

• 16 auto scans in the normal, the vector, and the random mode and the endless autopan with

13 speed steps.

• 8 patterns (up to 500 seconds) and 16 privacy zones.

• 4 alarm inputs, 2 alarm outputs (5VTTL).

• Variable speed from 0.1/sec. to 380/sec.

Three variable speeds (SLOW, NORMAL, TURBO).

• Pan/tilt speed is inversely proportional to the zoom ratio with the option.

• Maximum speed is 380/sec. when preset command.

• Auto calibration from 0.1 to 6 (tilt range is 0 to 180).

• Programmable user preferences (alarm, preset, title, etc.).

• 180 digital flip.

• Function Run menu using keyboard. without function key (preset, pattern, tour and scan).

• Built-in RS-485 receiver driver (up to 3999 selectable camera addresses).

• 12 VDC or 24 VAC for camera.

• 24 VAC for heater and fan.

Chapter 2 — Installation and Configuration

2.1 Package Contents

This system comes with the following components;

* Dome Camera 1

* Instruction Manual (this document) 1

* Accessory Kit & Connectors 1

1) Torx wrench (1)

2) 2-Pin Terminal Block (1)

3) 3-Pin Terminal Block (2)

4) 4-Pin Terminal Block (1)

5) 5-Pin Terminal Block (1)

* Install Adaptor 1

NOTE: Check your package to make sure that you received the complete system, including all

components listed above.

NOTE: Adapter for 12 VDC & 24 VAC is not supplied.

2.2 Mounting the Camera

An optional mount kit, either a wall mount or a ceiling mount, is required for installation.

The wall or ceiling mount must be attached to a structural object such as hard wood or concrete

that will support the weight of the mount and dome camera.

The use of a solid backboard is recommended when attaching to gypsum walls.

1. Remove the Protection pad and the tape from attached the dome camera.

2. Attach the mounting base to wall using the supplied M8 tapping screw and plastic bushing.

(For Ceiling installation use the supplied M6 tapping screw and bushing.)

3. To seal tightly, wrap the thread of the pipe end with Teflon tape about 20 times for sealing.

Then use a silicone rubber sealant to seal the area where the wall (ceiling) mount and the pipe

meet.

4. Place a bead of silicone sealant around the wall and ceiling mount mounting flange, press it to

the surface and line up the flange hole with drilled holes.

CAUTION 1: A silicone rubber sealant must be applied to seal the housing to secure

waterproofing.

CAUTION 2: When installing, a mounting bracket must be used.

CAUTION 3: Please reset the camera after 30 ~ 60 minutes when installing it in environments

colder than 14° F (-10°C).

CAUTION 4: Regardless of the installation environment, heater and fan power supply is

recommended.

2.2.1 Wall Mounting

The wall mounting plate must be attached to a structural object such as concrete that will support

the weight of the mount and dome camera.

1. Select a suitable mounting location and verify there is sufficient cable to reach the middle of

the wall mount.

2. Mark and drill mounting holes in the surface using the wall mount flange as a template.

3. Pull out cables required from the wall to connect to the dome camera.

4. Secure the wall mount bracket to the wall using plastic anchors and 8x35 screws provided or

hardware appropriate for the mounting surface.

5. Remove the access plate and pull cables out through rectangular access hole of the wall

mount bracket.

6. Attach the 1.5-inch adapter to wall mount bracket and secure it using set screw.

7. Attach the camera’s safety wire to the wall mount bracket and neatly gather cables.

8. Reattach the access plate of the wall mount bracket.

9. Push in and turn the camera clockwise into the adapter, and secure it using set screw of the

adapter.

2.2.2 Ceiling Mounting

The ceiling mounting plate must be attached to a structural object such as concrete that will

support the weight of the mount and dome camera.

This figure shows how to twist and lock the housing

with pipe.

1. Select a suitable mounting location

and verify there is sufficient cable to

connect with cables from the

housing.

2. Mark and drill mounting holes on the

surface using the ceiling mount

flange as a template.

3. Pull out the cables from the ceiling

required to connect to the dome

camera.

4. Attach the ceiling mount bracket

using plastic anchors and screws

appropriate for the mounting

surface.

5. Attach 1.5-inch adapter to the pipe

and secure it using set screw of the

adapter.

6. Route camera cables through the

pipe and attach the camera to

adapter and secure using set screw

of the adapter.

7. Attach safety wire to the pipe using

6x35 screws.

8. Connect cables and gather cables

neatly.

9. Lock hexagonal nut of the ceiling

mount bracket to secure camera’s

attached pipe and ceiling mount

bracket.

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon Roughnec V922D Series Bedienungsanleitung

Vicon

Vicon V600-C Series Bedienungsanleitung

Vicon

Vicon IX 2000 L Bedienungsanleitung

Vicon

Vicon I-Onyx MPD-955 Bedienungsanleitung

Vicon

Vicon V800D Bedienungsanleitung

Vicon

Vicon G-Cam/EFD-3266 Bedienungsanleitung

Vicon

Vicon V9360-1 Bedienungsanleitung

Vicon

Vicon Cruiser SN673V-C Bedienungsanleitung

Vicon

Vicon Cruiser SN673V-B Bedienungsanleitung

Vicon

Vicon SVR-C Bedienungsanleitung

Vicon

Vicon Surveyor 2000 Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2002D-PTZ Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000B Series Bedienungsanleitung

Vicon

Vicon Surveyor MKII Series XX282-20-00 Bedienungsanleitung

Vicon

Vicon V9360-1 Bedienungsanleitung

Vicon

Vicon VC-620 Bedienungsanleitung

Vicon

Vicon SURVEYOR 2000 S2000-CC22-EX Bedienungsanleitung

Vicon

Vicon V672B Betriebsanleitung

Vicon

Vicon Roughneck Pro V2000D Series Bedienungsanleitung

Vicon

Vicon I-ONYX MPD-980DN-O Bedienungsanleitung

Vicon

Vicon Roughneck V926 Bedienungsanleitung

Vicon

Vicon surveyor X971 Bedienungsanleitung

Vicon

Vicon V898MSH Benutzerhandbuch

Vicon

Vicon V942D-W312MIR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung