Vicon V922B-W551-A1 Bedienungsanleitung

User Manual

V922B-W551-A1 Network Bullet Camera

XX286-10-00

Vicon Industries Inc. does not warrant that the functions contained in this equipment will meet

your requirements or that the operation will be entirely error free or perform precisely as

described in the documentation. This system has not been designed to be used in life-critical

situations and must not be used for this purpose.

Document Number: 8009-8286-10-00 Product specifications subject to change without notice.

Vicon Industries Inc.

Tel: 631-952-2288) Fax: 631-951-2288

Toll Free: 800-645-9116

24-Hour Technical Support: 800-34-VICON

(800-348-4266) UK: 44/(0) 1489-566300

www.vicon-security.com

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO

NOT INSERT ANY METALLIC OBJECTS THROUGH THE

VENTILATION GRILLS OR OTHER OPENINGS ON THE

EQUIPMENT.

CAUTION

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the presence of

important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

FCC COMPLIANCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC INFORMATION: This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in

a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference in which case the user will be required

to correct the interference at his own expense.

CAUTION: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

CE COMPLIANCE STATEMENT

WARNING

This is a Class A product. In a domestic environment this product may

cause radio interference in which case the user may be required to take

adequate measures.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the

third prong is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the

cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when

the apparatus has been damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

15. CAUTION –THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF

ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN

THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU

ARE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed

Class 2 power source only.

17. ITE is to be connected only to PoE networks without routing to the outside

plant.

Contents

1 Introduction...................................................................................................................6

1.1 Components.....................................................................................................................6

1.2 Key Features....................................................................................................................7

2 Installation.....................................................................................................................8

2.1 Overview........................................................................................................................... 8

Dimension Unit: mm................................................................................................................ 8

2.2 Connections................................................................................................................... 10

2.2.1 Network Connection & IP assignment ................................................................. 11

3 Operation.....................................................................................................................13

3.1 Access from a browser ................................................................................................. 13

3.2 Access from the internet............................................................................................... 14

3.3 Setting the admin password over a secure connection.............................................. 14

3.4 Live View Page............................................................................................................... 15

3.5 Playback......................................................................................................................... 17

3.6 Network Camera Setup..................................................................................................19

3.6.1 Basic Configuration...............................................................................................19

3.6.2 Live View................................................................................................................ 24

3.6.3 Video & Image........................................................................................................ 25

3.6.4 Audio...................................................................................................................... 35

3.6.5 Event ......................................................................................................................36

3.6.6 Device Configuration..............................................................................................59

3.7 Help................................................................................................................................. 80

3.8 Resetting to the factory default settings...................................................................... 81

Reset button on the network camera inside the bottom cap.............................................. 81

A Appendix.....................................................................................................................82

A.1 Troubleshooting............................................................................................................82

A.2 Alarm Connection......................................................................................................... 83

A.3 Preventive Maintenance ...............................................................................................83

A.4 System Requirement for Web Browser ....................................................................... 84

A.5 General Performance Considerations ......................................................................... 84

A.6 Product Specification ................................................................................................... 85

1 Introduction

Vicon’s V922B-W551MIR-A1 HD IP Bullet Camera is designed for performance in the most

demanding security installations. The 1080p megapixel camera delivers crisp clear images to fit

any installation need. It includes a 5-51 mm motorized varifocal autoiris lens and IR illuminators;

true WDR is provided.

The V922B-W551MIR-A1 provides triple-streaming video and supports H.264 compression

technology. The bullet camera is designed for easy installation. Power over Ethernet (eliminates

the need for power cables, providing a cost-effective method of installation. The camera also

accepts 12 VDC. The V922B-W551MIR-A1 has an integral mount that allows it to be mounted on a

wall. The camera position is adjustable to any view required.

1.1 Components

This system comes with the following components;

* Bullet Camera 1

* Sunshield 1

* Installation Guide 1

* Accessory Kit 1

Check your package to make sure that you received the complete system, including all

components listed above.

NOTE: Adaptor for 12 VDC is not supplied.

1.2 Key Features

• Brilliant video quality

The network camera offers the highly efficient H.264 video compression, which drastically

reduces bandwidth and storage requirements without compromising image quality. Motion

JPEG is also supported for increased flexibility.

•Wide Dynamic Range

The network camera provides true WDR (Wide Dynamic Range) that improves video exposure

quality in scenes with high contrast between bright and dark areas in the video, for example a

shady area and a sunny area in the same scene.

• Dual or Triple Streams

The network camera can deliver dual or triple video streams simultaneously at full frame rate in

all resolutions up to full-HD (1920 x 1080p) using H.264 and Motion JPEG.

This means that several video streams can be configured with different compression formats,

resolutions and frame rates for different needs.

• Image setting adjustment

The network camera also enables users to adjust image settings such as contrast, brightness

and saturation to improve images before encoding takes place.

• Focus & Zoom Control via Network

The network camera also enables users to adjust focus and zoom remotely via network.

It also supports auto focusing.

• Intelligent video capabilities

The network camera includes intelligent capabilities such as VCA (Video Content Analysis).

The network camera’s external inputs and outputs can be connected to devices such as

sensors and relays, enabling the system to react to alarms and activate lights or open/close

doors.

• Improved Security

The network camera logs all user access, and lists currently connected users. Also, its full

frame rate video can be provided over HTTPS.

• PoE (Power over Ethernet)

This network camera can be powered through PoE+, which simplifies installation since only

one cable is needed for carrying power, as well as video controls.

• ONVIF Certificate

This is a global interface standard that makes it easier for end users, integrators, consultants,

and manufacturers to take advantage of the possibilities offered by network video technology.

ONVIF enables interoperability between different vendor products, increased flexibility,

reduced cost, and future-proof systems.

• Micro-SD Recording support

The network camera also supports a Micro-SD memory slot for local recording with removable

storage.

• Audio support

The network camera also supports two-way audio.

2 Installation

For the operation of the network bullet camera, it is necessary to connect a network cable for data

transmission and power connection from customer-supplied power adapter. Depending on

operation methods, it is possible to connect an alarm cable additionally.

2.1 Overview

Dimension

Dimension Unit: mm

Installing the Sunshield

To mount the sunshield provided to the bullet camera, secure it to the camera/sunshield mounting

hole with the screw and washer provided in the accessory kit. Refer to the Figure below.

Installing Camera

To mount the bullet camera, fix the base of the camera with the three screws provided in the

accessory kit.

2.2Connections

Extension Cable

Micro SD memory slot

Remove the rear cap of the camera to insert the SD memory card.

Connecting to the RJ-45

Connect a standard RJ-45 cable to the network port of the network camera. Generally a cross-

over cable is used for directly connection to PC, while a direct cable is used for connection to a

hub. A router featuring PoE (Power over Ethernet) can be used to supply power to the camera.

Connecting Alarms

AI (Alarm In): External devices can be used to signal the network camera to react on events.

Mechanical or electrical switches can be wired to the AI (Alarm In) and G (Ground) connectors.

G (Ground): Connect the ground side of the alarm input and/or alarm output to the G (Ground)

connector.

AO (Alarm Out): The network camera can activate external devices such as buzzers or lights.

No.

Item

Description

RJ-45

Ethernet, RJ-45 port compatible with

10/100Mbps PoE Modular Jack

DC Jack

Main Power, 12 VDC Input

AI (alarm In)

Alarm input and output, 3pin terminal

G (GND)

AO (Alarm Out)

MIC (Audio In)

Audio line input, 2pin terminal

G (GND)

SPK (Audio Out)

Audio line output, 2pin terminal

G (GND)

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon surveyor 2000 XX004 Betriebsanleitung

Vicon

Vicon SurveyorVFT SVFT-C266M Bedienungsanleitung

Vicon

Vicon Surveyor MKII Series XX282-00-01 Bedienungsanleitung

Vicon

Vicon V960-N Series Gebrauchsanweisung

Vicon

Vicon V15CCM-IR-2 Series Rouchneck Bedienungsanleitung

Vicon

Vicon ROUGHNECK V910 Bedienungsanleitung

Vicon

Vicon CRUISER S660V Betriebsanleitung

Vicon

Vicon SURVEYOR4A Bedienungsanleitung

Vicon

Vicon I-Onyx MPD-955DN-O Bedienungsanleitung

Vicon

Vicon I-Onyx VN-957DN Bedienungsanleitung

Vicon

Vicon Roughneck V920D Series Montage- und Bedienungsanleitung

Vicon

Vicon V992B-IR4 Bedienungsanleitung

Vicon

Vicon I-ONYX MPD-980DN-O Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000D Series Bedienungsanleitung

Vicon

Vicon V920B-A Series Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2000 Series Bedienungsanleitung

Vicon

Vicon Surveyor MKII Series XX282-20-00 Bedienungsanleitung

Vicon

Vicon V900-358-24C Bedienungsanleitung

Vicon

Vicon Cruiser SN663V Betriebsanleitung

Vicon

Vicon V-CELL-HD Bedienungsanleitung

Vicon

Vicon V988D Bedienungsanleitung

Vicon

Vicon ROUGHNECK V-CELL-HD-A Bedienungsanleitung

Vicon

Vicon SN118C Bedienungsanleitung

Vicon

Vicon V942D-W312MIR Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung