Vicon V960-N Series Gebrauchsanweisung

Quick User Guide V960-N Series Network Camera

Warning before installation

-Power off the Network camera if it is found to be smoking or smells unusual.

-Keep the Network camera away from water. If the Network camera gets wet, power

off immediately.

-Do not place the Network camera near heat sources, such as a television or oven.

-Refer to your instruction manual for the operating temperature.

-Keep the Network camera away from direct sunlight.

-Do not place the Network camera in high humidity environments.

-Do not place the Network camera on unsteady surfaces.

-Do not touch the Network camera when there is lightning present.

-Do not disassemble the Network camera.

-Do not drop the Network camera.

-Do not insert any object into the Network camera, such as a screwdriver.

For other safety and regulation information, please refer to User’s manual.

1. Check Contents

No. Item Description

1 Network Camera V960-N Series (V960-N, V961-N, V962-N)

2 Software CD User’s Manual, Utility software

3 Quick User Guide This document

4 Accessories Mounting bracket

Screws for mounting bracket

C-mount adapter ring

DC jack adapter

Dust protection cap

Terminal block connector

Allen wrench

2. Physical Description

Rear View

1. Alarm In/Out, Audio In/Out (use terminal block connector)

2. Video Out

3. Micro SD card (SDHC supported)

Quick User Guide V960-N Series Network Camera

4. Network (RJ-45 PoE supported)

5. Reset Button

6. Power (DC12V / AC24V)

7. Status LED

8. DC Iris

Front View

9. Flange back locking screw

3. Making Connection

1. If you have external devices such

as sensor or alarms, make connection

from terminal block connector.

3. Connect power cable to the camera.

When you use PoE function, you don’t

need to connect power.

2. Connect Ethernet cable to make connection

to the network hub.

Quick User Guide V960-N Series Network Camera

4. Assign IP Address

The default setting of the camera is set to “DHCP” and “UPnP” function is

set to ON. If you have a DHCP server on your network and UPnP function is

enabled on your PC you can find the network camera in “My network”.

If a DHCP server is not available on your network, please assign IP address

by the following process.

Execute Discovery_Tool.exe. It will search cameras on the network automatically.

1) After the camera is listed in camera list, select the camera.

2) Type in the all network information.

3) Click “Apply” button.

Then double click the camera in the list, Internet explorer will open

automatically.

5. Web Browser Connection

Note : The Network camera supports Internet Explorer® 7 or above.

Please check version of your browser and update it if necessary.

When you first access the camera you need to download and install an

Active X control from the camera to display a Live image.

Default User and Password are set to “ADMIN” and “1234”. Please type in

the user ID and password to connect the network camera.

Quick User Guide V960-N Series Network Camera

Note: By Default the cameras come with “Installation Mode” set to “ON” to

enable Analog output. You must turn installation mode off to use 720p

or 1080p streaming.

For further information for setup, please refer to User’s manual

on software CD.

Andere Handbücher für V960-N Series

Inhaltsverzeichnis

Andere Vicon Sicherheitskamera Handbücher

Vicon

Vicon V672V-1 Betriebsanleitung

Vicon

Vicon roughneck V900 Bedienungsanleitung

Vicon

Vicon V9360W Bedienungsanleitung

Vicon

Vicon V600-C Series Bedienungsanleitung

Vicon

Vicon V8360W Series Bedienungsanleitung

Vicon

Vicon Roughneck Pro V2002D-PTZ Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Vicon

Vicon V992E Bedienungsanleitung

Vicon

Vicon SVFT-MSH23C Bedienungsanleitung

Vicon

Vicon VC367DSP Bedienungsanleitung

Vicon

Vicon Roughneck V920D Series Montage- und Bedienungsanleitung

Vicon

Vicon VC-620 Bedienungsanleitung

Vicon

Vicon V900-358-24C Bedienungsanleitung

Vicon

Vicon V992D-IR Bedienungsanleitung

Vicon

Vicon V960D-W Series Gebrauchsanweisung

Vicon

Vicon surveyor 1000 Bedienungsanleitung

Vicon

Vicon ROUGHNECK V910 Bedienungsanleitung

Vicon

Vicon V2008-WNL-LPR Bedienungsanleitung

Vicon

Vicon IX 8000 IR Bedienungsanleitung

Vicon

Vicon V960D-N312 Gebrauchsanweisung

Vicon

Vicon VC565DN Bedienungsanleitung

Vicon

Vicon V930D Bedienungsanleitung

Vicon

Vicon 360 Multi-Sensor Camera Series Bedienungsanleitung

Vicon

Vicon V960-N Series Gebrauchsanweisung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung