Viessmann Vitocom 100 LAN1 Technisches Handbuch

Andere Handbücher für Vitocom 100 LAN1

1

Dieses Handbuch passt für folgende Modelle

1

Andere Viessmann Steuereinheit Handbücher

Viessmann

Viessmann VITOTRONIC SPS Betriebsanleitung

Viessmann

Viessmann VITOSOLIC 100 Kurzanleitung

Viessmann

Viessmann EM-EA1 extension Betriebsanleitung

Viessmann

Viessmann Vitotronic 100 GC1 Kurzanleitung

Viessmann

Viessmann 5204 Bedienungsanleitung

Viessmann

Viessmann 5215 2A Bedienungsanleitung

Viessmann

Viessmann EM-EA1 extension Betriebsanleitung

Viessmann

Viessmann 5546 Bedienungsanleitung

Viessmann

Viessmann EA1 Kurzanleitung

Viessmann

Viessmann 5205 Bedienungsanleitung

Viessmann

Viessmann Vitovolt 200 Kurzanleitung

Viessmann

Viessmann EM-M1 Kurzanleitung

Viessmann

Viessmann VITOSOLIC 200 Kurzanleitung

Viessmann

Viessmann vitotronic 200-h Bedienungsanleitung

Viessmann

Viessmann VITOSOLIC 200 Kurzanleitung

Viessmann

Viessmann VITOSOLIC 200 Betriebsanleitung

Viessmann

Viessmann VITOTRONIC 300 Kurzanleitung

Viessmann

Viessmann EM-S1 Kurzanleitung

Viessmann

Viessmann 5224 Bedienungsanleitung

Viessmann

Viessmann 5224 Bedienungsanleitung

Viessmann

Viessmann VITOTRONIC300 Kurzanleitung

Viessmann

Viessmann EM-P1 Betriebsanleitung

Viessmann

Viessmann Vitotrol 350 Bedienungsanleitung

Viessmann

Viessmann VITOSOLIC 100 Kurzanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung

Update manual for Vitocom 100 LAN1 / Vitocom 200 LAN2 with USB stick

Important hints:

The update file is located at www.vitocom.info „Software updates for Vitocom LAN devices”

This must be copied on a USB stick. It’s important, that this is the only file on the USB stick !

During the update the Vitocom must be connect to supply voltage.

During the update the USB stick must not be withdrawn !

1. To start the update, insert the USB stick into the USB inlet of the

Vitocom , see also

To check the LED display, please remove the cover by shifting it to the right and then lifting it (See also the manual of the

Vitocom)

2. After inserting the USB stick, the update starts automatically.

LED1

LED3

LED4

LED5

Normal operation

(Before Update)

Green

Green

Green

OFF

USB stick plugged

in.( Update starts)

OFF

Flashes shortly when

USB stick is inserted.

Fast blinking

Flashes shortly when

USB stick is inserted.

During update

process

OFF

OFF

Fast blinking green for

approx. 3 minutes.

OFF

During restart after

update

OFF

OFF

Slowly blinking green for

approx. 3 minutes.

OFF

Update done

(after approx. 5 min)

OFF

Green

Green

OFF

As soon as the update is done (after approx. 5 min), the USB stick can be removed again and may be reused for updates for

further Vitocoms . The success of the update can be checked with Vitodata100 or Vitodata 300. Therefore Vitotrol app users

just follow the menues “Settings info Vitodata/Vitocom”.

If the manual update cannot be performed successfully, please contact your Viessmann service partner.

display and operating elements

LED display (only visible when front cover removed)

„1“ LON Service LED ( green light)

„2“ Without function

„3“ IP link status ( yellow or green light)

„4“ Operation mode (red or green light)

„5“ Display data transmission when

using service interface (green light)

1 2 3 4

5

Update manual for Vitocom 300 LAN3 with USB stick

Important hints:

The update file is located at www.vitocom.info „Software updates for Vitocom LAN devices”

This file must be copied on a USB stick. It’s important, that this is the only file on the USB stick !

During the update the Vitocom must be connect to supply voltage.

During the update the USB stick must not be unplugged !

1. To start the update, insert the USB stick into the USB inlet of the Vitocom , see also

Typical sequence of the update process:

Time

[mm:ss]

Description

Information

00:00

USB stick inserted

LED3 OFF

00:05

Start copying update files

LED1 blinking (fast)

00:45

Display goes OFF (for approx. 5 sec.)

LED1 blinking (fast)

01:45

Display OFF and all LEDs OFF

03:15

Display OFF and LEDs blinking

LED1 blinking (slowly)

03:30

Vitocom restart. Display shows "Vitocom 300"

LED1 blinking (slowly)

04:30

Menu is displayed again

LED1 blinking (slowly)

05:10

Vitocom connected again with Vitodata Server.

LED1 und LED3 ON

Checking the new sotware version on the display:

1. Service > ok

2. Settings > ok

3. Software version >ok

In case of connected extension modules of type EM301, the whole update process can be up to 15 minutes long.

If the manual update cannot be performed successfully, please contact your Viessmann service partner.

Vitocom300 LAN3

LED Display

LED1 –Normal operation

LED2 –Error

LED3 - CON/ACT

In normal operation LED1 und LED3 is ON

During Update LED1 is important.