ViewZ Vz19rtt Bedienungsanleitung

19-INCH PREMIUM

TOUCH SCREEN CCTV MONITOR

USER MANUAL

Please read this manual thoroughly before use, and keep it handy for future reference.

SAFETY INSTRUCTION ………………………………………………………….……

2 ~ 3

CAUTIONS ……………………………………………………………..........................

FCC RF INTERFERENCE STATEMENT …………………………….......................

CONNECTING WITH EXTERNAL EQUIPMENT ……………………………………

REMOTE FUNCTIONS …………………………………………………………………

CONTROLS AND FUNCTIONS ………………………………………………………..

8 ~ 15

MOUNTING GUIDE ……………………………………………………………………..

D-SUB CONNECTOR PIN ASSIGNMENTS …………………………………………

POWER MANAGEMENT ………………………………………………………………

SPECIFICATION ………………………………………………………………………

19 ~ 20

TROUBLE SHOOTING GUIDE ………………………………………………….........

- 1 -

This Monitor was

Manufactured by ISO 9001

Certified Factory

Important Safety Instruction

1. Read these instructions.

2. Keep these Instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8. Do not install near any heat sources such as radiators, heat registers,stoves, or other

apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug.

Apolarized plug has two blades with one wider than the other.

Agrounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement

of the bsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles and the point where they exit from the apparatus.

11. Only use attachment/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or

sold with the apparatus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus

has been damaged in any way, such as power-supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the apparatus the apparatus has been exposed to

rain or moisture does not operate normally or has been dropped.

- 2 -

- The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids,

such as vases, shall be placed no the apparatus.

14 Minimum distances(e.g. 10cm) around the apparatus for sufficient ventilation.

“WARNING – To reduce the risk of fire or electric shock, do not expose the apparatus to rain or moisture.”

“The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,

such as vases, shall be placed on the apparatus.”

This symbol is intended to alert the user to the presence of uninsulated:

dangerous voltage with in the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating

and maintenance(servicing) instructions in the literature accompanying the

appliance.

- 3 -

CAUTION

The power supply cord is used as the main disconnect device, ensure that the socket-outlet is

located/installed near the equipment and is easily accessible.

ATTENTIONN

Le cordon d`alimentation est utillsé comme interrupteur général. La prise de courant doit être

située ou installée à proximité du matériel et être facile d`accès

▶NEVER REMOVE THE BACK COVER

Removal of the back cover should be carried out only by qualified personnel.

▶DO NOT USE IN HOSTILE ENVIRONMENTS

To prevent shock or fire hazard, do not expose the unit to rain or moisture.

This unit is designed to be used in the office or home. Do not subject the unit to vibrations,

dust of corrosive gases.

▶KEEP IN A WELL VENTILATED PLACE

Ventilation holes are provided on the cabinet to prevent the temperature from rising.

Do not cover the unit or place anything on the top of unit.

▶AVOID HEAT

Avoid placing the unit in direct sunshine or near a heating appliance.

▶TO ELIMINATE EYE FATIGUE

Do not use the unit against a bright back ground and where sunlight or other light sources will

shine directly on the monitor.

▶BE CAREFUL OF HEAVY OBJECT

Neither the monitor itself nor any other heavy object should rest on the power cord.

Damage to a power cord can cause fire or electrical shock.

- 4 -

NOTE

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television reception which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio, TV technician for help.

- Only shielded interface cable should be used.

Finally, any changes or modifications to the equipment by the user not expressly approved by

the grantee or manufacturer could void the users authority to operate such equipment.

▶DOC COMPLIANCE NOTICE

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital

apparatus set out in the radio interference regulation of Canadian Department of

communications.

- 5 -

A. BOTTOM PANEL CONTROL

1. HDMI2 IN

2. HDMI1 IN

3. DVI IN

4. VGA(D-SUB) IN

5. PC STEREO IN

6. AUDIO OUT(Speaker)

7. COMPONENT Y,Pb,Pr & SOUND L,R IN

8. DC 12V IN

9. TRIGGER IN

B. SIDE PANEL CONTROL

1. VIDEO1(AV1) IN

2. VIDEO1(AV1) OUT

3. VIDEO2(AV2) IN

4. VIDEO2(AV2) OUT

5. S-VIDEO(Y/C) IN

6. S-VIDEO(Y/C) OUT

7. AV1 & S-VIDEO AUDIO IN

8. AV1 & S-VIDEO AUDIO OUT

9. AV2 AUDIO IN

10. AV2 AUDIO OUT

11. TOUCH SCREEN USB CABLE

12. DC 12V ADAPTOR

- 6 -

C. REMOTE CONTROLLER (Option)

1. POWER( )

Turns the power ON or OFF. There will be a few seconds delay before the display appears.

2. SOURCE

Selects PC or video(AV1/AV2/S-Video/Component/HDMI/DVI/PC) sources.

3. AUTO

Auto geometry adjustment in PC Source.

4. HOLD

Stops the Trigger & Auto switching functions.

5. MUTE

Mutes the sound.

6. MENU

Activates and exits the On Screen Display.

7. EXIT

Exits the On Screen Display.

8. VOL( )

Increases or decreases the level of audio volume.

9. UP/DOWN

Moves to OSD menu.

10. SOURCE/SELECT

Accepts your selection or displays the current mode.

11. INFO

Input mode information Display.

12. STILL

Stops the picture.

13. PIP (Picture In Picture)

Activates PIP mode.

14. P.INPUT

Changes source of sub picture in PIP mode.

15. P.POS

Moves the position of sub picture for PIP mode.

16. P.SIZE

Changes the size of sub and main picture for PIP mode.

17. SWAP

Alternates between main and sub picture.

18. ARC (Aspect Ratio Control)

Selects screen ratio.

19. APC (Auto Picture Control)

Selects picture mode.

20. ACC (Auto Color Control)

Selects Colour mode.

21. S.SET

Selects Sound mode main input or sub input

22. PC

Selects PC mode(PC, DVI & HDMI).

23. AV

Selects AV mode.(AV1, AV2 & S-VIDEO).

24. COMP

Selects COMPONENT mode.

- 7 -

D. FRONT KEY CONTROL

1 / 2. ◀VOL ▶

Adjust the volume and menu settings.

3 / 4. ▲/ ▼

These buttons allow user to enter the sub-menu of the activated function.

The up(▲) button is HOLD function and stop the Trigger & Auto switching functions.

5. SOURCE/SELECT

Select PC or video.

Select On Screen Display menu.

6. MENU/EXIT

Activate and exit the On Screen Display.

7. POWER ON/OFF( / I )

Turns the power ON or OFF. There will be a few seconds delay before the display appears.

8. IR Sensor

Remote controller sensor.

9. POWER LED

The power LED lights with green when the power is turned ON.

The power is turned off by pressing the power switch again and the power LED goes Red.

- 8 -

Inhaltsverzeichnis

Andere ViewZ Monitor Handbücher

ViewZ

ViewZ VZ-UNBS SERIES Bedienungsanleitung

ViewZ

ViewZ ZM-L8A Bedienungsanleitung

ViewZ

ViewZ VZ-49ENB Bedienungsanleitung

ViewZ

ViewZ VZ-215LED-E Bedienungsanleitung

ViewZ

ViewZ VZ-43UHD Bedienungsanleitung

ViewZ

ViewZ VZ-215D2IP Bedienungsanleitung

ViewZ

ViewZ VZ-156PM-4K Bedienungsanleitung

ViewZ

ViewZ VZ-MV1602-SDI Bedienungsanleitung

ViewZ

ViewZ 23-INCH TFT-LCD Bedienungsanleitung

ViewZ

ViewZ 40" WUXGA Bedienungsanleitung

ViewZ

ViewZ VZ-090PM-P Bedienungsanleitung

ViewZ

ViewZ VZ-LX SERIES Bedienungsanleitung

ViewZ

ViewZ VZ-19CMP Bedienungsanleitung

ViewZ

ViewZ VZ-CGM Series Bedienungsanleitung

ViewZ

ViewZ VZ-097PM-3G Bedienungsanleitung

ViewZ

ViewZ VZ-24HX Bedienungsanleitung

ViewZ

ViewZ 17-INCH PREMIUM Bedienungsanleitung

ViewZ

ViewZ VZ-15RTC Bedienungsanleitung

ViewZ

ViewZ 215LEDSN Bedienungsanleitung

ViewZ

ViewZ VZ-MV802 Bedienungsanleitung

ViewZ

ViewZ VZ185LEDE Bedienungsanleitung

ViewZ

ViewZ 9.7-INCH TFT-LED Bedienungsanleitung

ViewZ

ViewZ VZ-CMP Series Bedienungsanleitung

ViewZ

ViewZ VZ-RTC SERIES Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

ViewZ vz19rtt Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken