Vinotemp VT-WINED RAW4 Bedienungsanleitung

WWW.VINOTEMP.COM

A PROUD HERITAGE OF EXPERIENCE & QUALITY

OWNER’S MANUAL

Wine Draw

Dispenser & Preserver

VT-WINED RAW4 (4 bottles)

WWW.VINOTEMP.COM

General Operating Instructions

Remove all external and internal packaging from your wine cellar. Be sure that

all parts have been included before discarding any packaging materials. You

may want to keep the box and packing materials for use at a later date.

Upon receipt and inspection of unit, the supply cord must be replaced if it is

damaged. Contact our customer service at 1-800-777-8466 or

[email protected].

•Let the unit rest, UNPLUGGED for 24 hours once you have it placed in

your home.

•Please fully read the instruction manual.

•Save these instructions.

Please read and follow all safety rules

and operating instructions before using.

Serving Wines

Storing wines at the proper temperature is important. To preserve them as

long as possible, wine should be stored at approximately 55° Fahrenheit.

However, the chart below suggests the optimal drinking temperature for the

different styles of wine.

°C °F Wine Style

19 66 Armagnac, Brandy, Cognac

18 64.5 Full Bodied Red wines, Shiraz

17 62 Tawny Port

15 59 Medium Bodied Red Wines

14 57 Amontillado Sherry

13 55.5 Light Bodied Red Wines

12 53.5 Full Bodied White Wines

11 52 Medium Bodied White Wines

10 50 Rosé, Light Bodied White Wines

9 48 Vintage Sparkling

8 46.5 Fino Sherry

7 44.5 Non Vintage Sparkling

17621 South Susana Road, Rancho Dominguez, California 90221

info@vinotemp.com

TABLE OF CONTENTS

IMPORTANT SAFETY INFORMATION ...............................................4

FEATURE DESCRIPTION ...............................................................5

SPECIFICATIONS ........................................................................6

INSTALLATION INSTRUCTIONS .....................................................7

DISPENSING OPERATION .............................................................9

TEMPERATURE CONTROL............................................................11

ALARM SIGNALS .......................................................................12

CARE & MAINTENANCE...............................................................13

TROUBLESHOOTING ..................................................................15

WIRING DIAGRAM.....................................................................18

SERVICE & IMPORTANT NOTICE..................................................20

WWW.VINOTEMP.COM

IMPORTANT SAFETY INFORMATION

17621 South Susana Road, Rancho Dominguez, California 90221

info@vinotemp.com

FEATURE DESCRIPTION

•The WINE DRAW 4 keeps opened wines fresh from oxidization for weeks

through use of noble gas such as nitrogen or argon.

•The refrigerated glass-door cabinet displays wines and dispenses from up

to 4 opened bottles while chilling 4 additional bottles

•Quiet, high-output compressor system with automatic defrost maintains

wine at the proper storing and serving temperature between 40°F and

65°F.

•The compact design with blue LED touch-buttons gives the modern

attraction

•NSF-approved plastic components and sanitary stainless steel spout keep

your wines clean.

•Miniature stainless steel electronic valves prevent any wine drip from the

dispensing spout.

•A blue LED digital temperature controller allows you to set the desired

temperature for white or red wines easily.

WWW.VINOTEMP.COM

SPECIFICATIONS

CAPACITY

(8 Bottles Total)

MODEL SERVING STORING

DIMENSIONS (in)

W X H X D ELECTRICAL WEIGHT

(lb)

VT-WINE

DRAW4 4 4

19.25 X 25.75 X

21.5 115V/60Hz/

1PH 1.5 A 65

17621 South Susana Road, Rancho Dominguez, California 90221

info@vinotemp.com

INSTALLATION INSTRUCTIONS

Location

•This wine preserver-dispenser is designed for free-standing installation

only.

•It is recommended that this unit be kept in a location with an ambient

temperature range of 55°F - 90°F. It is not intended for garage or

basement installation.

•Place the unit in a properly ventilated location to prevent heat build-up

generated by the refrigeration system. Failure to do so will prevent the

unit from cooling properly, and may result in damage to unit

components as well as its contents.

•Leave 5” clearance on all sides.

•Use the adjustable legs to position the unit level.

WWW.VINOTEMP.COM

Electrical Cord

•Because of potential safety hazards under a certain condition, we

strongly recommend against the use of an extension cord. However, if

you still elect to use an extension cord, it is absolutely necessary that it

will be a UL LISTED 3-wire grounding type appliance extension cord with

a 3-blade grounding plug and a 3-slot receptacle. The marked rating of

the extension cord should be 115 V, 15 A.

Nitrogen Connection

NOTE: THE CYLINDER IS SHIPPED WITHOUT FILLING NITROGEN.

1. Connect the regulator to the nitrogen cylinder by tighten CGA 580

connection nut, and regulate the outlet pressure to 3 psig (preset).

2. Connect the nitrogen hose (0.25” OD) to the regulator by pushing the

quick disconnect couplings plug to the coupling socket at the regulator.

BEFORE OPEN THE CYLINDER VALVE TO DELIVER NITROGEN, MAKE

SURE THE QUICK DISCONNECT COUPLING PLUG AT THE STOPPER-

DISPENSER IS UNPLUGGED.

17621 South Susana Road, Rancho Dominguez, California 90221

info@vinotemp.com

DISPENSING OPERATION

Placing and Replacing Bottle

NOTE:

•DO NOT OVER TIGHTEN STOPPER-DISPENSER, OTHERWISE IT

MAY BE DAMAGED.

•IF THERE IS NO WINE BOTTLE IN USE, ALWAYS UNPLUG THE

QUICK DISCONNECT COUPLING PLUG FROM THE COUPLING

SOCKET AT THE STOPPER-DISPENSER, OTHERWISE, NITROGEN

LEAKS.

1. Hold the Stopper-Dispenser and press the spring at the quick-disconnect

coupling socket to unplug the coupling plug.

2. Hold the Stopper-Dispenser and turn the thumbwheel counter-clockwise

all the way to loosen the empty bottle, and then place a new bottle.

3. Hold down the Stopper-Dispenser onto the bottle and turn the

thumbwheel counter-clockwise all the way first.

4. And then turn clockwise to tighten the bottle starting with a little tight.

5. Plug the coupling plug into the coupling socket.

6. Once there are no bubbles forming at the stopper-dispenser , it indicates

the bottle seal is ok.

WWW.VINOTEMP.COM

Dispensing Wine

1. Push and hold the “Touch-Button” to dispense the selected wine into

your glass.

2. Release the button to stop dispensing.

3. Wait until no wine dripping from the spout.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Vinotemp Getränkespender Handbücher

Vinotemp

Vinotemp VT-WINEDISP4 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP2 Bedienungsanleitung

Vinotemp

Vinotemp VT-PRWINEDIS4S Bedienungsanleitung

Vinotemp

Vinotemp Butler Series Bedienungsanleitung

Vinotemp

Vinotemp VT - PONYKEG Bedienungsanleitung

Vinotemp

Vinotemp VT-WD002-2BTL Bedienungsanleitung

Vinotemp

Vinotemp VT -WINEDRAW4 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP4 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP4 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP4 Bedienungsanleitung

Vinotemp

Vinotemp VT-WineDraw4 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP2 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP2 Bedienungsanleitung

Vinotemp

Vinotemp VT-WINEDISP4SS Bedienungsanleitung

Beliebte Getränkespender Handbücher anderer Marken

PEGAS

PEGAS Evolution Bedienungsanleitung

Ugolini

Ugolini MT micro Bedienungsanleitung

Bunn

Bunn SLCA-7 Montageanleitung

Gekkeikan

Gekkeikan Sake Machine Bedienungsanleitung

Olympia

Olympia DH709 Bedienungsanleitung

Marco

Marco ECOSMART PB10 Bedienungsanleitung

Marvel

Marvel ML24BN Series Handbuch

Cecilware

Cecilware 2K-GB-LD Handbuch

Sure Vend

Sure Vend 673 Bedienungsanleitung

Cornelius

Cornelius 2 Flavor Post-Mix Cold Coffee Dispenser Quest... Bedienungsanleitung

Nostalgia Electrics

Nostalgia Electrics KEG7000SS Bedienungsanleitung

Bunn

Bunn LCR-3 HV Fehlerbehebungshandbuch

Servend

Servend SV-200 Bedienungsanleitung

EdgeStar

EdgeStar VBR440 Bedienungsanleitung

Cornelius

Cornelius A.B.S. Unit Bedienungsanleitung

CDS AUTOMATEN

CDS AUTOMATEN ML-16C2-C Bedienungsanleitung

Siemens

Siemens GA 3000 Gebrauchsanweisung

Cornelius

Cornelius FCB V4 Technische Daten