VIO 7 Vio Bedienungsanleitung

Rev. 1 20.12.2019

7 Vio

INSTRUCTIONS MANUAL

pH - Cond - PC

Rev. 1 20.12.2019

Index

Introduction.............................................................................................................................................5



Safety information

..................................................................................................................................6

Definition of warning words and symbols...........................................................................................6

Reporting terms ..................................................................................................................................6

Additional documents for safety.........................................................................................................7

Use according to destination...............................................................................................................7

Basic requirements for a safe use .......................................................................................................7

Unauthorized use................................................................................................................................7

Device maintenance............................................................................................................................7

Responsibility of the owner of the instrument...................................................................................8

Instrumental features..............................................................................................................................8

Parameters ..........................................................................................................................................8

Datasheet............................................................................................................................................9

Instrument description .........................................................................................................................10

Display...............................................................................................................................................10

Keyboard ...........................................................................................................................................10

LED.....................................................................................................................................................11

Installation.............................................................................................................................................11

Supplied components........................................................................................................................11

Implementation.................................................................................................................................11

Turning On and Off............................................................................................................................11

Replacement of batteries..................................................................................................................12

Instrument shipment.........................................................................................................................12

Key functions.....................................................................................................................................12

Inputs / Outputs connections ...........................................................................................................13

Symbols and icons on display............................................................................................................13

Operation of the device.........................................................................................................................14

Setup Menu ...................................................................................................................................15

Setup Menu’s Structure ...................................................................................................................16

Temperature measurement ATC – MTC ...............................................................................................17

pH Parameter ................................................................................................................................17

pH parameter Setup .........................................................................................................................17

Composition of the setup Menu for pH parameter ..........................................................................17

Automatic pH calibration ..................................................................................................................19

Manual calibration ............................................................................................................................20

Performing pH measurement ...........................................................................................................21

DHS Electrodes ..............................................................................................................................21

Errors during calibration ..................................................................................................................22

Rev. 1 20.12.2019

mV Parameter........................................................................................................................................22

ORP Parameter (Redox Potential) ...................................................................................................22

ORP Parameter Setup .......................................................................................................................23

Composition of the setup Menu for ORP Parameter........................................................................23

ORP automatic calibration ...............................................................................................................23

Conductivity Parameter ..............................................................................................................24

…how to get the Conductivity? .........................................................................................................24

Setup for Conductivity Parameter ...................................................................................................24

Automatic Cond calibration ..............................................................................................................28

Manual Conductivity calibration .....................................................................................................29

Errors during calibration ..................................................................................................................30

Performing Conductivity measurement ..........................................................................................30

TDS Parameter ..........................................................................................................................31

Instrument Settings ........................................................................................................................31

Composition of the setup menu for Settings Menu..........................................................................32

Warranty ...........................................................................................................................................33

Warranty period and limitations .......................................................................................................33

Disposal of electrical devices ............................................................................................................34

XS Instruments

Via della Meccanica n.25 41012 Carpi (MO) ITALY

Tel. +39 059.653274 Fax +39 059653282

www.xsinstruments.com

Rev. 1 20.12.2019

Introduction

XS Instruments, globally recognized as a leading brand in the field of electrochemical measurements, has

developed this new line of professional bench instruments, which is completely produced in Italy, finding

the perfect balance between performance, attractive design and ease of use.

The perfect balance between the high performance of the instrument, a modern and attractive design

and the user-friendliness make this series of instruments the ideal solution for electrochemical

measurements in laboratory.

The innovative high definition colour LCD display shows all the necessary information, such as the

measurement, the temperature, the buffers used for the last calibration (also custom), the condition of

stability.

Everyone can use these tools thanks to the instructions that appear directly on the display. The calibration

is guided step by step and the instrument configuration menu is easy to consult. In addition, a LED

indicates the status of the system to the user.

Up to 3 pH calibration points can be made between 8 automatically recognized values and 5 points for

Conductivity; in addition, buffers chosen by the operator can be used.

It is also possible to perform mV calibration for Redox sensors.

For an accurate measurement of Conductivity, it is possible to work with 3 different cell constants and

modify the compensation coefficient and the reference temperature.

It is possible to consult the calibration data anytime and the representation makes the calibration process

more efficient, through the icons of the buffers used.

The ideal solution for an accurate and precise measurement is using an XS Sensor electrochemical

electrode with an XS Instruments device and perform the calibrations with XS Solution certified

calibration solutions.

Rev. 1 20.12.2019



Safety information

Details of the words and symbols of warning

The safety information in this manual is very important to avoid personal injury, damage to the instrument,

malfunctions or incorrect results due to failure to comply with them. Read this manual carefully in its

entirety and make sure you familiarize yourself with the tool before putting it into operation and starting to

work with it.

This manual must be kept in the vicinity of the instrument, so that the operator can consult it if necessary.

Safety provisions are indicated with warning terms or symbols.

Reporting terms:

ATTENTION for a medium risk hazardous situation, which could lead to serious injury or death if

not avoided.

ATTENTION for a dangerous situation with reduced risk which, if not avoided, can cause material

damage, data loss or minor or medium-sized accidents.

ADVICE for important product informations.

NOTE for useful important informations.

Warning symbols:

Attention

This symbol indicates a potential risk and warns you to proceed with

caution.

Attention

The instrument must be used following the indications of the reference

manual. Read the instructions carefully.

Advice

This symbol draws attention to possible damage to the instrument or

instrumental parts.

Note

This symbol highlights further information and tips.

Attention

This symbol draws attention to a possible danger from electric current.

Rev. 1 20.12.2019

Additional documents that provide safety information

The following documents can provide the operator with additional information to work safely with the

measuring system:

operating manual for electrochemical sensors;

safety data sheets for buffer solutions and other maintenance solutions (ex storage..);

specific notes on product safety.

Use according to destination

This instrument is designed exclusively for electrochemical measurements both in the laboratory and

directly in the field.

Pay attention to the technical specifications shown in the INSTRUMENT FEATURES / TECHNICAL DATA table;

any other use outside them is to be considered unauthorized.

This instrument has been manufactured and tested in compliance with EN 61010-1 safety standards for

electronic instruments and has left the factory in perfect technical conditions (see test report in each

package) and safety.

The regular functionality of the device and the operator’s safety are guaranteed only if all the normal

laboratory safety standards are respected and if all the specific safety measures described in this manual

are observed.

Basic requirements for safe use

The regular functionality of the device and the operator's safety are guaranteed only if all the following

indications are respected:

the instrument can only be used in accordance with the specifications mentioned above;

if using the instrument with the power supply, use only the model supplied. If you need to replace the

power supply, contact your local distributor;

the instrument must operate exclusively in the environmental conditions indicated in this manual;

the only part of the instrument that can be opened by the user is the battery compartment.

Carry out other operations only if explicitly authorized by the manufacturer.

Unauthorized use

The instrument must not be put into operation if:

is visibly damaged (for example due to transportation);

it has been stored for a long period of time in adverse conditions (exposure to direct light, heat sources

or places saturated with gas or vapours) or in environments with conditions different from those

mentioned in this manual.

Device maintenance

If used correctly and in a suitable environment, the instrument does not require maintenance procedure.

It is recommended to occasionally clean the instrument case with a damp cloth and a mild detergent. This

operation must be performed with the instrument off and disconnected from the power supply and only by

expert and authorized personnel.

The housing is in ABS / PC (acrylonitrile butadiene styrene / polycarbonate). This material is sensitive to

some organic solvents, for example toluene, xylene and methyl ethyl ketone (MEK).

Rev. 1 20.12.2019

If liquids get into the housing, they could damage the instrument.

In case of prolonged non-use of the device, cover the BNC connectors with the special cap.

Do not open the instrument housing: it does not contain parts that can be maintained, repaired or replaced

by the user. In case of problems with the instrument, contact your local distributor.

It is recommended to use only original spare parts. Contact your local distributor for information. The use

of non-original spare parts can lead to malfunction or permanent damage to the instrument. Moreover, the

use of spare parts not guaranteed by the supplier can be dangerous for the user himself.

For the maintenance of the electrochemical sensors, refer to the documentation present in their packaging

or contact the supplier.

Responsibility of the owner of the instrument

The person who owns and uses the tool or authorizes its use by other people is the owner of the tool and

as such is responsible for the safety of all users of the tool and third parties.

The owner of the instrument must inform users of the use of the same safely in their workplace and on the

management of potential risks, also providing the required protective devices.

When using chemicals or solvents, follow the manufacturer's safety data sheets.

Instrumental features

Parameters

pH 7 Vio: pH, mV, ORP, Temp

COND 7 Vio: Cond, TDS, Temp

PC 7 Vio: pH, mV, ORP, Cond, TDS, Temp

Rev. 1 20.12.2019

Datasheet

Series 7 Vio

pH 7 Vio - PC 7 Vio

Measuring range

0 … 14

Resolution / Accuracy

0.1, 0.01 / +0.02

Recognized calibration points and

buffers

AUTO: 1…3 / USA, NIST

CUS: 2 user values

Buffers indication

Yes

Calibration report

Yes

Automatic DHS recognition

Yes

Stability filter

Low – Nor - High

pH 7 Vio - PC 7 Vio

Range / Resolution

Range: -1000 … +1000 / Resolution: 1

ORP

pH 7 Vio - PC 7 Vio

Calibrations points

1 point / 475 mV

Conductivity

COND 7 Vio - PC 7 Vio

Range / Resolution

0,00 – 20,00 – 200,0 – 2000 μS /

2,00 – 20,00 – 200,0 mS

Automatic scale

Recognized calibration points and

buffers

1…5 / 84, 147, 1413 μS, 12.88, 111.8 mS,

1 user value

Reference temperature

15…30 °C

Temperature coefficient

0,00…10,00 %/°C

TDS

COND 7 Vio - PC 7 Vio

Temperature coefficient

0,1mg/l…200 gr/l / 0.40…1.00

Temperature

pH 7 Vio - COND 7 Vio - PC 7 Vio

Measuring range

0…100 °C

Resolution / Accuracy

0,1 / ± 0,5°C

Temperature compensation ATC

(NTC30KΩ) and MTC

pH: 0…100 °C

Cond: 0…80 °C

System

Display

High definition colours LCD

Brightness and contrast management

Manual

Sleep mode

Yes

Auto-Off

Yes

IP protection

IP 57

Power supply

AA 1,5 V – 3 batteries

Sound level during standard operation

< 80 dB

Environmental operating conditions

0 … +60 °C

Maximum permissible humidity

< 95 % non-condensing

Maximum altitude of use

2000 m

System dimensions

185 x 85 x 45 mm

System weight

400 g

Reference regulations

EMC 2014/30/UE

RoHS 2011/65/EU

EN 61326-1

EN 61010-1

Rev. 1 20.12.2019

Description of the instrument

Display

Keyboard

Down directional key to scroll through

the menus and values in setup

Enter / Menu key to confirm the chosen values

and enter the setup from the measurement

mode

Measurement

parameter

Indication of

instrumental

mode

Buffers’

representation used

for calibration

Error symbol

Actual value / Measure unit

Temperature and type of

compensation

ATC - automatic NTC 30KΩ

MTC - manual

DHS connection icon Indication of use of the directional keys

Stability

indicator

Text string

Date and time

Battery charge level

Text string

On-Off button to

switch the device on

and off

Meas / Cal key to return to

measurement mode and to start

calibration

UP / MODE directional key for scrolling

through menus and values in setup, for

scrolling parameters in measurement

Inhaltsverzeichnis

Andere VIO Messgerät Handbücher

VIO

VIO POV.1.5 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung