Viotek NFI29CB Bedienungsanleitung

In order to continue serving our customers and providing the best products, our product

information including our user manuals may receive updates from time to time. Please

check our website for the latest user manuals and product materials.

NFI29CB

LED MONITOR

USER MANUAL

Table of Contents

Section 1: Safety Precautions ............................................ 4

Section 2: Box Contents ..................................................... 5

Section 3: Product Overview .............................................. 6

3.1 – Monitor Buttons ....................................................... 6

3.2 – Monitor Ports .......................................................... 7

Section 4: Stand Installation .............................................. 7

Section 5: Mount Installation.............................................. 9

Section 6: Basic Operation................................................. 10

Section 7: Indicator Light.................................................... 11

Section 8: OSD..................................................................... 11

8.1 – OSD Menu Functions .............................................. 12

Section 9: OSD Shortcuts................................................... 13

Section 10: Troubleshooting............................................... 14

Section 11: Cleaning............................................................ 15

Section 12: Speciﬁcations .................................................. 16

Section 13: Three-Year Limited Hardware Warranty ........ 17

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use

dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however,

the safest. If using damp cloth, wait for your monitor to completely dry before

plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your

monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking

these openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources, e.g., portable heaters or

heating vents, as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen

or any part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation

openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it

from falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any

disassembly or modication etc. not performed by an authorized technician

can result in damage to the monitor and/or possible exposure to high voltage

electricity which may lead to serious injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons

due to failure to adhere to the aforementioned precautions or any others noted

hereafter.

The terms HDMI and HDMI High-Denition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc. in the United States and other countries.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1

Stand Base x 1

Power Cable x 1

(DC12V 4A)

Screws x 2

DP Cable x 1 User Manual x 1

Section 3: Product Overview

3.1 – Monitor Buttons

Actions Description

Rocker Up Gameplus timer shortcut key

Rocker Down Gameplus crosshair shortcut key

Rocker Left Display mode menu shortcut key

Rocker Right Signal source selection menu shortcut key

Press Rocker Press and hold for ~6s to turn on or off the monitor.

Quick-press to enter the OSD menu.

Quick-press to Conrm operations / settings

Menu Navigation:

Actions Description

Rocker Up Move up

Rocker Down Move down

Rocker Left Return to previous menu / Adjust value

Rocker Right Enter next menu / Adjust value

Rocker Button

1 2 3 4

3.2 – Monitor Ports

1 Power Connector: Insert the power cable to supply power to the monitor.2 HDMI Connectors: Insert one end of the HDMI cable into the computer’s

HDMI output and connect the other end to the monitor’s HDMI port.

3 DP Connector: Insert one end of the DP cable into the computer’s DP output

and connect the other end to the monitor’s DP port.

4 Audio Output:Insert the audio cable for output of audio signals.

Section 4: Stand Installation

Keep the foam underneath the monitor before attaching the stand.

1. Open the package and take out the monitor with foam still attached. Gently place

it face-down on a desktop or table.

2. Take out the stem and base. Use the included screwdriver and two screws to

fasten base to the stem.

Screws x 2

Stand Stem

Base

3. Remove the foam covering the back of the monitor. Locate the two top slots of the

opening on the back of monitor. Insert the mounting plate into the two top slots.

Continue to press in until it clicks into place to make sure the stand is installed in

place.

4. Place the monitor on your desktop or table after completing the installation and

carefully adjust monitor’s angle and/or orientation as desired.

Tilt adjust +5° / -15°

5. With the stand fully assembled, remove the remaining foam on monitor and stand

it up on a at, level desktop or table. Press the button to remove the monitor from

the bracket if mounting.

Button

Make sure the monitor is laid on a at surface before removing the stand.

Section 5: Mount Installation

1. Open the package and take out the product with foam still attached. Gently

place it on a desktop or table. Remove the extra parts and the foam covering the

monitor. If the monitor is already attached to the stand, remove the stand.

Button

2. Tighten four screws (not included) onto the mounting holes on back of monitor.

4x Screws (not included)

3. Install the monitor on the wall, mount, or xture as desired.

Mount

(not included)

Section 6: Basic Operation

1. Insert one end of the DP cable (included) into your PC’s graphics card. An HDMI

cable (not included) may also be used.

2. Connect the other end of the cable to the corresponding port on your monitor.

DP Port

Audio Out

HDMI Ports

3. Connect the power cable to your monitor, then connect the other end to your

power source. It is recommended that you use a surge protector with adequate

voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press and hold it for ~6s to turn the

monitor on.

If you cannot locate the power button, please refer to Section 3.1.

Connecting an audio device (headphones, external speaker, etc.) through the

audio out port may disable other audio devices.

VIOTEK Adaptive Sync

Adaptive sync eliminates image tearing, stuttering and ghosting by adjusting of a

monitor’s vertical refresh rate to the frame rate of the graphics card. It is compatible

with GPUs that use AMD® FreeSync™ or NVIDIA® G-Sync™. The feature is off

on VIOTEK monitors by default and must be manually enabled in the monitor’s

OSD (see Section 8: OSD). To use this feature, the connecting device must be

compatible with adaptive sync (FreeSync and/or G-Sync); have the latest graphic

drivers; and be connected to the monitor using a DisplayPort (DP) cable.

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek GN27DW Bedienungsanleitung

Viotek

Viotek H270 Bedienungsanleitung

Viotek

Viotek GN32DA Bedienungsanleitung

Viotek

Viotek GNV34DB2 Bedienungsanleitung

Viotek

Viotek NFI24DBA Bedienungsanleitung

Viotek

Viotek NV32Q Bedienungsanleitung

Viotek

Viotek GNV27CB Bedienungsanleitung

Viotek

Viotek GN34CW Bedienungsanleitung

Viotek

Viotek GN32C Bedienungsanleitung

Viotek

Viotek GFI27DBXA Bedienungsanleitung

Viotek

Viotek RFI25CBA Bedienungsanleitung

Viotek

Viotek NB32CW Bedienungsanleitung

Viotek

Viotek GFV27DAB Bedienungsanleitung

Viotek

Viotek GN32LD Bedienungsanleitung

Viotek

Viotek GFV24CB Bedienungsanleitung

Viotek

Viotek GNV27DB2 Bedienungsanleitung

Viotek

Viotek GNV34DBE2 Bedienungsanleitung

Viotek

Viotek GNV34DB Bedienungsanleitung

Viotek

Viotek GNV32CBO Bedienungsanleitung

Viotek

Viotek GNV32DB Bedienungsanleitung

Viotek

Viotek NBV27CB Bedienungsanleitung

Viotek

Viotek LinQ Touch Bedienungsanleitung

Viotek

Viotek GNV27DB Bedienungsanleitung

Viotek

Viotek GFI27QXA Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung