Viotek GNV27DB2 Bedienungsanleitung

In order to continue serving our customers and providing the best products, our product information

including our user manuals may receive updates from time to time. Please check our website for the

latest user manuals and product materials.

GNV27DB2

GAMING MONITOR

USER MANUAL

Table of Contents

Section 1: Safety Precautions ............................................ 4

Section 2: Box Contents ..................................................... 5

Section 3: Product Overview .............................................. 6

3.1 – Monitor Buttons ....................................................... 6

3.2 – Monitor Ports .......................................................... 6

Section 4: Stand Installation .............................................. 7

Section 5: Mount Installation.............................................. 8

Section 6: Basic Operation................................................. 9

Section 7: Indicator Light.................................................... 9

Section 8: OSD..................................................................... 10

8.1 – OSD Menu Functions.............................................. 11

Section 9: ECO Modes and Gameplus .............................. 13

Section 10: Troubleshooting............................................... 13

Section 11: Cleaning............................................................ 15

Section 12: Speciﬁcations .................................................. 16

Section 13: Three-Year Limited Hardware Warranty ........ 17

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use

dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however,

the safest. If using damp cloth, wait for your monitor to completely dry before

plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your

monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking

these openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources, e.g., portable heaters or

heating vents, as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen

or any part of the monitor.

6. Do not insert anything into any part of the monitor especially the ventilation

openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it

from falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor or monitor cables.

10. Do not attempt to disassemble or remove parts from the monitor. Any

disassembly or modication etc. not performed by an authorized technician

can result in damage to the monitor and/or possible exposure to high voltage

electricity which may lead to serious injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons

due to failure to adhere to the aforementioned precautions or any others noted

hereafter.

The terms HDMI and HDMI High-Denition Multimedia Interface, and

the HDMI Logo are trademarks or registered trademarks of HDMI

Licensing Administrator, Inc. in the United States and other countries.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

Power Cable x 1

NO. 2 Screws x 4

(for Mounting)

NO.1 Screws x 4

(for Stand Installation) DP Cable x 1

Screwdriver x 1 User Manual x 1

The screws come in different sizes: NO.1 (11mm x 4 pcs), NO.2 (35mm x 4

pcs). Extra screws may be included.

35mm

Section 3: Product Overview

3.1 – Monitor Buttons

7 Audio Output: Insert one end of the audio cable into an external audio

source, e.g., speakers or headphones, to pass audio signals through the

monitor.

8 DP Connector: Insert one end of the DP cable into the computer’s DP output

and connect the other end to the monitor’s DP port.

9 HDMI Connectors: Insert one end of the HDMI cable into the computer’s

HDMI output and connect the other end to the monitor’s HDMI port.

10 Power Connector: Insert the power cable to supply power to the monitor.7 8 9 10

2 3 4 5 61

1 M Menu Button: Press to display the OSD menu or enter sub-menus.

2 Down Button: Press to move down in the menus.

3 Up Button: Press to move up in the menus.

4 E Exit Button:Press to exit.

5 Power Button: Press to turn the monitor on/off.

6 LED Indicator: Changes colors to indicate status. Refer to Section 7.

3.2 – Monitor Ports

HDMI 2.0 HDMI 1.4

Section 4: Stand Installation

Keep the foam underneath the monitor before attaching the stand.

1. Open the package and take out the monitor with foam still attached. Gently place

it top-down on a desktop or table.

2. Take out the stem and base. Use the included screwdriver and one screw to

fasten base to the stem.

Screw x 1

Stand Stem

Base

3. Remove the foam covering the bottom of the monitor, then remove the adapter

from the back of monitor. Use two NO. 1 screws to fasten adapter onto the stem.

Adapter

Screws x 2

4. With the stand fully assembled, reattach it onto the back of monitor. Then remove

the remaining foam on monitor and stand it up on a at, level desktop or table.

Press the button to remove the monitor from the bracket if mounting.

Button

Make sure the monitor is laid on a at surface before removing the stand.

Section 5: Mount Installation

1. Open the package and take out the product with foam still attached. Gently place

it on a desktop or table. If the monitor is already attached to the stand, remove

the stand.

Button

2. Press the button to remove the adapter on back of monitor, then tighten the

included four NO. 2 screws onto the mounting holes on back of monitor.

NO. 2

Screws x 4

3. Remove the extra parts and the foam covering the monitor, then install the

monitor on the wall, mount, or xture as desired.

Mount

(not included)

Section 6: Basic Operation

1. Insert one end of the DisplayPort (DP) cable into your PC’s graphics card. An

HDMI cable (not included) may also be used. A DP cable is included for your

convenience.

2. Connect the other end of the cable to the corresponding connector on your

monitor.

HDMI Ports

Audio Out

DP Port HDMI 2.0 HDMI 1.4

3. Connect the power cable to your monitor, then connect the other end to your

power source. It is recommended that you use a surge protector with adequate

voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

VIOTEK Adaptive Sync

Adaptive sync eliminates image tearing, stuttering and ghosting by adjusting of a

monitor’s vertical refresh rate to the frame rate of the graphics card. It is compatible

with GPUs that use AMD® FreeSync™ or NVIDIA® G-Sync™. The feature is off

on VIOTEK monitors by default and must be manually enabled in the monitor’s

OSD (see Section 8: OSD). To use this feature, the connecting device must be

compatible with adaptive sync (FreeSync and/or G-Sync); have the latest graphic

drivers; and be connected to the monitor using a DisplayPort (DP) cable.

Section 7: Indicator Light

Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Flashing

blue light indicates no video source, no horizontal or vertical signal has been

detected or voltage is low. Please ensure your computer is on and all video cables

are fully inserted and/or connected.

Section 8: OSD

The On-Screen Display (OSD) Menu may be used to adjust your monitor’s settings

and appears on screen after turning on the monitor and pressing the M( ) button.

When using the monitor for the rst time, settings will automatically adjust to

optimal settings according to your computer’s standard conguration settings.

1. Press any one of the buttons (M, , , E, ) to activate the navigation window.

eco

2. Press M( ) to enter the OSD menu.

Resolution：1920x1080@60Hz

Input Source

Brightness/Contrast

Color Setting

Picture Quality Setting

Display

Audio

Multi-Window

OSD

Other

HDMI 1 (2.0)

HDMI 2 (1.4)

HDMI 3 (1.4)

Window1：

InputSource：DP

Resolution：1920x1080@60Hz

Window2:

InputSource：Resolution：

HDMI

Resolution：2560x1440@60Hz

Input Source

Brightness/Contrast

Color Setting

Picture Quality Setting

Display

Audio

Multi-Window

OSD

Other

HDMI 1 (2.0)

HDMI 2 (1.4)

HDMI 3 (1.4)

Window1：

InputSource：HDMI2

Resolution：2560 x1440@60Hz

Window2:

InputSource：Resolution：

3. Press ( ) or (eco) to browse functions.

• Highlight the desired function, then press M( ) to enter the sub-menu.

• Press ( ) or (eco) to browse sub-menus, then press M( ) to highlight the

desired function.

• Press ( ) or (eco)to highlight an option, then press M( ) to conrm the

settings and exit the current screen.

4. Press E( ) to exit the current screen.

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek SUW49DA Bedienungsanleitung

Viotek

Viotek RFI25CBA Bedienungsanleitung

Viotek

Viotek GFT27CXB2 Bedienungsanleitung

Viotek

Viotek NBV27CB Bedienungsanleitung

Viotek

Viotek GNV34DB Bedienungsanleitung

Viotek

Viotek GN35DR Bedienungsanleitung

Viotek

Viotek NB27C Bedienungsanleitung

Viotek

Viotek GNV27CB Bedienungsanleitung

Viotek

Viotek GN34C Bedienungsanleitung

Viotek

Viotek GNV34CB Bedienungsanleitung

Viotek

Viotek GN24CW Bedienungsanleitung

Viotek

Viotek NB24CW Bedienungsanleitung

Viotek

Viotek GFT27DB Bedienungsanleitung

Viotek

Viotek GNV34DB2 Bedienungsanleitung

Viotek

Viotek GNV32DB Bedienungsanleitung

Viotek

Viotek GN35LD Bedienungsanleitung

Viotek

Viotek H270 Bedienungsanleitung

Viotek

Viotek GFV22CB Bedienungsanleitung

Viotek

Viotek GFI34CB Bedienungsanleitung

Viotek

Viotek GNV34DBE2 Bedienungsanleitung

Viotek

Viotek LinQ Bedienungsanleitung

Viotek

Viotek NBV24CB2 Bedienungsanleitung

Viotek

Viotek NFI24DBA Bedienungsanleitung

Viotek

Viotek NBV24CB Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung