Viotek GFI27QXA Bedienungsanleitung

In order to continue serving our customers and providing the best products, our product information

including our user manuals may receive updates from time to time. Please check our website for the latest

user manuals and product materials.

GFI27QXA

GAMING MONITOR

USER MANUAL

Table of Contents

Section 1: Safety Precautions................................................................4

Section 2: Box Contents.........................................................................5

Section 3: Product Overview .................................................................6

3.1 – Monitor Buttons .........................................................................6

3.2 – Monitor Ports.............................................................................6

Section 4: Stand Installation..................................................................7

Section 5: Shading Plate Installation....................................................8

Section 6: Mount Installation .................................................................9

Section 7: Basic Operation ....................................................................10

Section 8: Indicator Light .......................................................................10

Section 9: OSD ........................................................................................11

9.1 – OSD Menu Functions ................................................................12

Section 10: RGB, LED Effects and Gameplus......................................14

Section 11: Troubleshooting ..................................................................15

Section 12: Speciﬁcations......................................................................16

Section 13: Three-Year Limited Hardware Warranty ...........................17

Section 1: Safety Precautions

Read and observe the following warnings and information below.

1. Before cleaning, always unplug your monitor. It is recommended that you use

dry cloth or lightly damp cloth to clean your monitor. Dry cloth is, however,

the safest. If using damp cloth, wait for your monitor to completely dry before

plugging it in again.

2. Do not use alcohol or ammonia-based cleaner and/or liquids to clean your

monitor.

3. This monitor features ventilation openings on the back of the unit. Avoid blocking

these openings to prevent the monitor from overheating.

4. Avoid placing this monitor near any heat sources, e.g., portable heaters or

heating vents, as this may cause damage to your monitor.

5. Do not spray cleaner and or any kind of liquid directly onto the monitor’s screen

or any part of the monitor.

6. Do not insert anything into any part of the monitor, especially the ventilation

openings.

7. Always make sure your monitor is placed on a secure, level surface to prevent it

from falling and sustaining damage.

8. Unplug your monitor during any extended periods of non-use.

9. Do not place heavy items on the monitor, monitor cables, or shading plate.

10. Do not attempt to disassemble or remove parts from the monitor. Any

disassembly or modication not performed by an authorized technician can

result in damage to the monitor and/or possible exposure to high voltage

electricity which may lead to serious injury or death.

VIOTEK®shall not be held responsible for injury or damage of products or persons

due to failure to adhere to the aforementioned precautions or any others noted

hereafter.

The terms HDMI and HDMI High-Denition Multimedia Interface,

and the HDMI Logo are trademarks or registered trademarks of

HDMI Licensing Administrator, Inc. in the United States and other

countries.

Section 2: Box Contents

Monitor x 1 Stand Stem x 1 Stand Base x 1

Power Cable x 1

Left Side Shading

Plate x 1

Right Side Shading

Plate x 1

Top Right Shading

Plate x 1

Top Middle Shading

Plate x 1

Top Left Shading

Plate x 1

NO. 1 Screws x 3

(for Stand Installation)

DP Cable x 2Silicone Pad x 6 Screwdriver x 1 User Manual x 1

Extra screws may be included as backup.

NO. 2 Screws x 4

(for Stand Installation)

NO. 4 Screws x 4

(for Wall Mounting)

NO. 3 Screws x 6

(for Stand Mounting)

Section 3: Product Overview

3.1 – Monitor Buttons

6 HDMI 2.0 Connectors: Insert one end of the HDMI cable into the

computer’s HDMI output and connect the other end to the monitor’s HDMI port.

7 DP 1.4 Connectors: Insert one end of the DP cable into the computer’s DP

output and connect the other end to the monitor’s DP port.

8 Audio Output: Insert the audio cable for output of audio signals.

9 Power Connector: Insert the power cable to supply power to the monitor.

1 M Menu Button: Press to display the OSD menu or enter sub-menus.

2 Up Button: Press to move up in the menus.

3 Down Button: Press to move down in the menus.

4 E Exit Button:Press to exit.

5 Power Button: Press to turn the monitor on/off.

3.2 – Monitor Ports

6 8 9

Section 4: Stand Installation

Keep the foam underneath the monitor before attaching the stand.

1. Open the package and take out the monitor with foam still attached. Gently place

it on a desktop or table.

2. Take out the stem and base. Insert the stem into the base then use the included

screwdriver and two NO.1 screws to fasten base to the stem.

NO.1 Screw x 2

Stand Stem

Base

3. Remove the foam covering the back of the monitor. Then align the stand stem’s

bracket with the opening on the back of the monitor. Carefully insert the bracket

into the opening. Use four NO. 2 screws to fasten bracket onto the monitor.

NO.2 Screw x 4

4. With the stand fully assembled, reattach it onto the back of monitor. Then remove

the remaining foam on monitor and stand it up on a at, level desktop or table.

Make sure the monitor is laid on a at surface before removing the stand.

Section 5: Shading Plate Installation

1. With the stand fully assembled, place the monitor on a at, level desktop or table.

Then take out the shading plates to get ready for installing.

Left Side Shading

Plate x 1

Right Side Shading

Plate x 1

Top Right Shading

Plate x 1

Top Middle Shading

Plate x 1 Top Left Shading

Plate x 1

2. Follow the arrows to align the top-right and top-left shading plates with the ‘O‘ /

‘C‘ lines on both sides of the top-middle shading plates. Then insert top-right and

top-left shading plates into the top-middle shading plate. Keep sliding the top-

right and top-left shading plates until they x in place.

Top Right Shading

Plate x 1 Top Middle Shading

Plate x 1 Top Left Shading

Plate x 1

3. Take out six NO.3 screws and follow the picture below to install the shading plates

onto the monitor. Release the screws if you want to remove the shading plates,

then cover the screw holes with the silicone pad.

Left Side Shading Plate

NO.3 Screws

Right Side Shading Plate

Top Shading Plate

Section 6: Mount Installation

1. Open the package and take out the product with foam still attached. Gently

place it on a desktop or table. Remove the extra parts and the foam covering the

monitor. If the monitor is already attached to the stand, remove the stand.

2. Gently put one nger into the hole of adapter then pull it out to remove it from

the back of monitor. Follow the below picture to tighten the included four NO. 4

screws onto the mounting holes on back of monitor.

NO.4 Screws x 4

3. Install the monitor on the wall, mount, or xture as desired.

Mount

(Not included)

Section 7: Basic Operation

1. Insert one end of the DisplayPort (DP) cable into your PC’s graphics card. Two

DP cables are included for your convenience. An HDMI cable (not included) may

also be used.

2. Connect the other end of the cable to the corresponding connector on your

monitor.

HDMI 2.0 Connectors

DP 1.4 Connectors

3. Connect the power cable to your monitor then connect the other end to your

power source. It is recommended that you use a surge protector with adequate

voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

Overclocking (DP Only)

Depending on your graphics card, it may be possible to overclock the monitor’s

refresh rate, up to 144Hz. Doing so may limit the maximum. resolution as

determined by your graphics card and the cable used.

Overclocking can result in image distortion based on the conguration of the connected

device. It may be possible to reduce distortion by lowering monitor resolution.

Overclocking has the potential to damage the monitor. Damage caused by overclocking

is not covered by the warranty.

AMD FreeSync

This feature is off by default. To activate, you must have hardware with FreeSync

capability, a DP or HDMI cable, and the latest graphic drivers. After connecting your

computer and monitor with a DP or HDMI cable, you may receive a prompt to enable

the feature on your computer. If you do not, you may need to enable the function in

your graphics card menu. See your graphics card manufacturer’s documentation for

instructions.

Section 8: Indicator Light

Solid white light indicates power is on and

the monitor is operating normally. Flashing

white light indicates no video source,

no horizontal or vertical signal has been

detected or voltage is low. Please ensure

your computer is on and all video cables are

fully inserted and/or connected.

Indicator Light

Inhaltsverzeichnis

Andere Viotek Monitor Handbücher

Viotek

Viotek GNV34DBE2 Bedienungsanleitung

Viotek

Viotek GNV34CB Bedienungsanleitung

Viotek

Viotek NFI29CB Bedienungsanleitung

Viotek

Viotek GN35DR Bedienungsanleitung

Viotek

Viotek GN32C Bedienungsanleitung

Viotek

Viotek GNV34DB Bedienungsanleitung

Viotek

Viotek GFI34CB Bedienungsanleitung

Viotek

Viotek GFI24CBA Bedienungsanleitung

Viotek

Viotek NBV24CB Bedienungsanleitung

Viotek

Viotek NBV27CB Bedienungsanleitung

Viotek

Viotek NB24CW Bedienungsanleitung

Viotek

Viotek LinQ Touch Bedienungsanleitung

Viotek

Viotek GFI27DBXA Bedienungsanleitung

Viotek

Viotek GN27CB Bedienungsanleitung

Viotek

Viotek GN32DA Bedienungsanleitung

Viotek

Viotek GFV22CB Bedienungsanleitung

Viotek

Viotek GFT27CXB2 Bedienungsanleitung

Viotek

Viotek RFI25CBA Bedienungsanleitung

Viotek

Viotek GNV30CB Bedienungsanleitung

Viotek

Viotek GFV24C Bedienungsanleitung

Viotek

Viotek LinQ Bedienungsanleitung

Viotek

Viotek GNV29CB Bedienungsanleitung

Viotek

Viotek GN32LD Bedienungsanleitung

Viotek

Viotek GN34C Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung