Vitek Mighty Series Bedienungsanleitung
BLACK
VITEK
Mighty Series True
Day & Night Dome
Cameras
700 TVL Day & Night
Dome Cameras
• 1/3” Sony High Density EXVIEW CCD
• 700 TVL High Resolution
• Sony Effio-E Digital Signal Processor
• 0.0003Lux (F1.2@50IRE)
• 2DNR - Two Dimensional Noise Reduction
• Motion Detection
• Privacy Mask
• Adaptive Tone Reproduction
• Secondary Video Output (Cable Included)
• OSD (On Screen Display) for Camera Function Setup
• Flush or Surface Mount
• Infinity Ball Mount for Any Viewing Angle
• UTP Interface and Heater / Blower Options Available
• ¾” Conduit Knockouts
• Indoor and Outdoor IP 686 Vandal Versions
• 35 IR LED’s with 90ft Range (Model L35)
• Optional Extreme Cold (-60°F) Temperature Kit Available
• Available in Ivory or Black
• Dual Voltage 12VDC & 24VAC
VITEK
TABLE OF CONTENTS
BOX CONTENTS
INCLUDED ACCESSORIES
AVAILABLE MODELS/ACCESSORIES
MIGHTY DOME LAYOUT
INSTALLATION
JUNCTION BOX INSTALLATION
OPEN GIMBAL COVER
CONNECTIONS
LENS ADJUSTMENT
INFINITE AXIS GIMBAL ADJUSTMENT
OSD MENU FEATURES/SETUP
1. In the menu
2. MAIN menu
3. MAIN menu - 1
4. MAIN menu - 2
5. SHUTTER/AGC menu
6. SHUTTER/AGC > AUTO SETUP menu
7. SHUTTER/AGC > MANUAL SETUP menu
8. LENS menu
9. DAY/NIGHT menu
10. PICT ADJUST menu
11. WHITE BAL menu
12. ATR (Adaptive Tone Reproduction) menu
13. BACKLIGHT menu
14. NR menu
15. MOTION DET menu
16. PRIVACY menu
1
1
2
3
4
5
6
7
8
9
10
10
10
10
11
11
12
13
13
13
15
15
17
18
18
19
19
VITEK
TABLE OF CONTENTS
20
20
21
21
22
23
24
25
26
29
17. LANGUAGE menu
18. CAMERA ID menu
19. CAMERA RESET
20. EXIT
DIMENSIONS
HEATER/BLOWER SPECIFICATIONS
INDOOR MIGHTY DOME SPECIFICATIONS
VANDAL MIGHTY DOME SPECIFICATIONS
IR MIGHTY DOME SPECIFICATIONS
WARRANTY
BLACK
1
AVAILABLE MODELS / ACCESSORIES
BOX CONTENTS
INCLUDED ACCESSORIES
1) Dome Camera
2) Accessories
3) VT-MD-2VOC (Secondary Video Output Cable)
4) Instruction Manual & Mounting Template
Torx Wrench - (Vandal & IR Versions Only)
Type #: T20
Length: 63mm / Diameter: 4mm
Qty: 1
Phillips head Screws - (Vandal & IR Versions Only)
For attaching the dome cover to the flush housing.
Type #: Phillips head M4x10
Length: 10mm / Diameter: 4mm
Qty: 4
Self Tapping Screws
For attaching the surface mount housing or the the flush mount base to a
solid surface.
Type #: Phillips St4x30
Length: 30mm / Diameter: 4mm
Qty:4
Self Tapping Screws - (Indoor Version Only)
For attaching the dome cover to the flush housing.
Type #: Phillips St4x12
Length: 12mm / Diameter: 4mm
Qty: 4
Dowels
If necessary, use the to help secure the self tapping screws.
Length: 30mm / Diameter: 7mm
Qty: 4
Secondary Video Output Cable for Mighty Domes:
VT-MD-2VOC
For viewing video image during installation.
Qty: 1
Mounting Template
Qty: 1
Mounting Template
Surface Mount
109.0
70.0
AVAILABLE MODELS / ACCESSORIES
INDOOR MIGHTY DOME CONFIGURATIONS:
VTD-MP2810DN: Indoor True Day and Night Color Dome Camera with 2.8-10mm
Varifocal Lens & 700TVL
VTD-MP922DN: Indoor True Day and Night Color Dome Camera with 9-22mm
Varifocal Lens & 700TVL
VTD-MP1850DN: Indoor True Day and Night Color Dome Camera with 18-50mm
Varifocal Lens & 700TVL
VANDAL RESISTANT MIGHTY DOME CONFIGURATIONS:
VTD-MVP2810DN: Vandal Resistant True Day and Night Color Dome Camera with
2.8-10mm Varifocal Lens & 700TVL
VTD-MVP922DN: Vandal Resistant True Day and Night Color Dome Camera with
9-22mm Varifocal Lens & 700TVL
VTD-MVP1850DN: Vandal Resistant True Day and Night Color Dome Camera with
18-50mm Varifocal Lens & 700TVL
IR MIGHTY DOME CONFIGURATIONS:
VTD-MVP2810/L35: Vandal Resistant Color Dome Camera with 2.8-10mm Varifocal
Lens, 700TVL & 35 IR LED’s
VTD-MVP922/L35: Vandal Resistant Color Dome Camera with 9-22mm Varifocal
Lens, 700TVL & 35 IR LED’s
VTD-MVP1850/L35: Vandal Resistant Color Dome Camera with 18-50mm Varifocal
Lens, 700TVL & 35 IR LED’s
Optional Mounts & Accessories:
1. Heater/Blower Option 24VAC: (Vandal Resistant Models)
2. UTP Option: Unshielded Twisted Pair Transceiver Built-In
3. VT-MD/FMP: Flush Mount Plate for installation in drop ceilings or can be used as cover plate when using 4S
Junction Box
4. VT-MD/PLMT: Mighty Dome Pole Mount Adapter - Requires VT-MD/WMT Wall Mount
5. VT-MD/CMT: Mighty Dome Ceiling/Pedestal Mount (Can be extended if necessary)
6. VT-MD/CNMT: Mighty Dome Corner Mount Adapter - Requires VT-MD/WMT Wall Mount
7. VT-MD/WMT: Mighty Dome Wall Mount (Available In Ivory or Black)
8. VT-MD-EMP: Extender Mounting Plate - Use as stand-off for cable management and extended viewing angle
1. 2. 3. 4. 5. 6. 7. 8.
2
BLACK
3
MIGHTY DOME LAYOUT
1) Lens
2) Power Input Connector(12VDC /
24VAC)
3) Video Output Connector - BNC
4) Camera Holder and 2nd Video
output
5) Ball with the Camera Assembly
6) Safety Wire
7) Bubble
8) Dome Cover Ring
9) Flush Mount Base
10) Surface Mount Plate
11) Assembly Screws - Torx M4x9
(Vandalproof)
12) Assembly Screws - Phillips
ST4x12 (Indoor) / Phillips M4x10
(Vandalproof / IR)
13) Mounting Screws - Phillips ST4x30
INSTALLATION
1) Dome Cover
1.1 Vandal Proof Domes - Use the provided Torx wrench to unscrew the vandal
proof screws and remove the dome cover.
1.2 Indoor Domes - Turn the dome cover to the left to remove the dome cover.
2) Flush Mount Installation:
Using four St4x30 screws, attach the flush mount base to a sturdy surface.
Optional flush mount decorator plate. Model: VT-MD-FMP
3) Surface Mount Installation:
Drill pilot holes at the mounting location using the provided mounting template.
Using four St4x30 screws, mount the surface mount housing to a sturdy
surface. Using four ST4x12 (Indoor) screws or M4x10 (Vandal-proof) screws,
attach the flush mount base to the surface mount housing.
4
BLACK
5
JUNCTION BOX INSTALLATION
Mighty Domes can easily be flush or surface mounted to an electrical junction
box (4S J-Box) using the pre-drilled mounting holes on either the surface mount
housing or the the flush mount base.
OPEN GIMBAL COVER
To adjust the zoom and the focus, the gimbal needs to be removed temporarily
from its base.
1) Remove the ball gimbal from its socket, and hold the base firmly with one hand.
2) Gently squeeze Point A and B and pull away from the base until the gimbal is
removed from the base.
3) Replace the Gimbal cover by aligning the cover to the base and pressing down
until it snaps back onto the base.
6
BLACK
7
CONNECTIONS
• Power connection: 12VDC or 24VAC dual input.
• All Mighty Dome cameras come standard with a secondary video output. The
secondary video cable (VT-MD-2VOC) is included in the box.
VTM-LCD
Andere Handbücher für Mighty Series
1
Dieses Handbuch passt für folgende Modelle
9
Inhaltsverzeichnis
Andere Vitek Sicherheitskamera Handbücher
Vitek
Vitek VTC-IRLED30HD Bedienungsanleitung
Vitek
Vitek VTC-IRE24F Bedienungsanleitung
Vitek
Vitek VTC-C2BTS1 Bedienungsanleitung
Vitek
Vitek VTD-TND3RVE Bedienungsanleitung
Vitek
Vitek VTD-IR2811DN Bedienungsanleitung
Vitek
Vitek VTC-LED307BB Bedienungsanleitung
Vitek
Vitek Transcendent Series Bedienungsanleitung
Vitek
Vitek VT-IRBD1 Bedienungsanleitung
Vitek
Vitek VTC-THB5R3 Bedienungsanleitung
Vitek
Vitek VTD-MVH2910DN Bedienungsanleitung
Vitek
Vitek VTC-TNT5RFS Bedienungsanleitung
Vitek
Vitek VTC-IRE70 Bedienungsanleitung
Vitek
Vitek OnCue VT-PTZ230HD Bedienungsanleitung
Vitek
Vitek VTD-TTAD24R2F Bedienungsanleitung
Vitek
Vitek VTD-M30 Bedienungsanleitung
Vitek
Vitek VT-PTZ18 Bedienungsanleitung
Vitek
Vitek VTD-MVH2910 Bedienungsanleitung
Vitek
Vitek VTC-TNB42R3F Bedienungsanleitung
Vitek
Vitek VTC-TNT5RFE-2 Bedienungsanleitung
Vitek
Vitek VT-IR1C/12 Bedienungsanleitung
