Vitek VTC-C544 Bedienungsanleitung

VTC-C544

1/3" “DSP” Color CCD Camera

INSTRUCTION MANUAL

1General

This color video camera employs a 1/3” SONY solid-state, charge coupled imaging

device, and is equipped with a newly developed DSP (Digital Signal Processor) for

video signal processing to provide high color fidelity and a sharp, stable picture.

2Features

1. 380 lines of horizontal resolution and high quality video utilizing digital processing

2. 0.5lux Minimum illumination and signal-to-noise ratio of 48 dB is achieved by

employing a highly sensitive image sensor with micro lenses and low noise circuit

design.

3. High quality picture –A digital signal processor performs digital horizontal and

vertical aperture enhancement to produce high quality picture.

4. A newly developed intelligent wide range Auto Tracing White Balance (ATW) that

automatically adjusts the tone according to the color temperature of the light

source.

5. Smart digital control Auto BLC, the combination of Histogram equalizer and

Central windows weighting BLC functions ensure for use against any unusual

lighting conditions.

6. Advanced Auto Exposure System for both fixed iris and auto iris lenses controls

the amount of light to ensure optimum video signal.

7. Built-in Line-lock sync.

To prevent electric shock, do not remove screws or covers.

There are no user serviceable parts inside.

Contact a qualified service person if necessary.

Warning:

To prevent fire or electric shock hazard, do not expose

the appliance to rain or moisture

3Name of parts and functions

A. Power input block terminal

AC 24V model for external Vertical phase input as Line lock

B. Dip-switch

1.CCD IRIS (AES) / AUTO IRIS SW(DD Drive)

2.NORMAL / BACKLIGHT SW

3.ATW / FIX SW

4.Normal / Mirror SW

C. Video output terminal(BNC)

D. Holder screw hole

E. Flange focal lock screw

F. C (CS) mount adapter

If a CS mount lens is to be used, remove the C mount ring.

G. Auto iris lens connector(MINI JACK)

For use with auto iris lens without EE amp, set the lens selector switch to “DD”

position.

Note: This camera does not support “Video” Type auto iris lenses.

Connector cable leads

1. Damping coil (-) 3. Driving coil (+)

2. Damping coil (+) 4. Driving coil (-)

H. DC lever Adjuster (VR)

For DC drive auto iris lens driving level adjustment; in order to obtain

optimum exposure in varying lighting conditions.

I. Power pilot LED

4Auto Tracing White Balance

4.1 ATW—Auto tracking white balance

This camera is equipped with an digital auto tracing white balance function,

This ensures white balance control based on the absolute color temperature of

the object and adjusts automatically.

Auto color temperature tracing white balance is a feedback system, that

aligns the white balance by detecting the R-Y and B-Y signal. After performing

white detection, the convergence shift processing is judged and accurately

operated by internal micro-controller.

The operating color temp. range is from 3200°K to 7500°K approximately.

4.2 FIX—fixed white balance

Point the camera at a white object and bring it into focus. Move dip switch to

the FIX mode.

5AE Mode

5.1 AES (CCD IRIS) mode

AES mode is performed by the CCD iris and AGC, the range of the electronic

shutter is from 1/50(1/60) to 1/100,00 second; the AGC range is from 0 to 36

dB.

5.2 Auto Iris DD Mode

In this mode, the shutter speed isfixed at 1/60 sec. NTSC. Auto exposure

operation is performed by AGC through the microcontroller and mechanical iris

of external lens. The back light compensation amount is calculated by internal

microcontroller, then output and supplied to the governor inside the auto iris

lens.

6Auto Back-light Compensation

This auto BLC function consists of two methods of Backlight compensation; one is

Central Windows weighted average BLC, the other is Histogram calculating BLC.

Microprocessor (dip switch ON position)

The combination of two types of backlight compensation makes it easier to arrange

backlight operation to match the imaging conditions and installation location.

Note:

Compensation may be insufficient under extremely bright conditions.

7Specifications

Image device 1/3” interline transfer SONY Super HAD CCD

Signal system NTSC standard

Picture Elements 542(H) X492 (V)

Scanning system 525 lines

Sync system Line-Lock (24V AC Model)

Horizontal resolution 380 TV lines

Minimum illumination 0.5 lux at F1.2

Aperture correction H aperture and V aperture

Gain Max. Gain 36dB; Off

S/N ratio Better than 48dB

Auto exposure system AES (CCD iris): 1/50(1/60) -1/100,000 sec. /Auto Iris mode: 1/60 sec.

Auto iris lens Accepts DC servo iris lens

ATW ATW: 3200°K to 7500°K

Backlight compensation

Auto detect On/off; Histogram plus windows weight BLC

Video output signal Composite: 1 V p-p at 75 Ohm

Lens mount C & CS mount

Operating temperature 14°F to 122°F (-10°C to 50°C)

Power source AC 24V

Power consumption 2W (AC type)

Dimensions (W x H x D) 2.25” x 2.05” x 4.33” (57 x 52 x 110mm)

9970 GLENOAKS BLVD. UNIT B SUN VALLEY, CA 91352

PHONE: 888-VITEK-70 818-771-0300 FAX: 818-771-0400

WWW.VITEKCCTV.COM

Inhaltsverzeichnis

Andere Vitek Sicherheitskamera Handbücher

Vitek

Vitek Transcendent VTC-TNT3RFE Bedienungsanleitung

Vitek

Vitek Transcendent VTD-TND8RMA3 Bedienungsanleitung

Vitek

Vitek Transcendent Series Bedienungsanleitung

Vitek

Vitek VT-PTZ26 Bedienungsanleitung

Vitek

Vitek VTC-BHOCCR212M Bedienungsanleitung

Vitek

Vitek VTD-IR2811DN Bedienungsanleitung

Vitek

Vitek VT-PTZ220N Bedienungsanleitung

Vitek

Vitek VTD-VH49VP4 Bedienungsanleitung

Vitek

Vitek TRANSCENDENT VTD-TND3RVEB Bedienungsanleitung

Vitek

Vitek VTC-IRV30/2810 Bedienungsanleitung

Vitek

Vitek VT-IR1C/24 Bedienungsanleitung

Vitek

Vitek Transcendent Series Bedienungsanleitung

Vitek

Vitek VTC-IR40-N Bedienungsanleitung

Vitek

Vitek VTC-TNB8RFA4-2 Bedienungsanleitung

Vitek

Vitek VTD-HOCR2812 Bedienungsanleitung

Vitek

Vitek VT-PTZ220N Bedienungsanleitung

Vitek

Vitek Transcendent Series Bedienungsanleitung

Vitek

Vitek VTC-THT5R3 Bedienungsanleitung

Vitek

Vitek VTD-THD5R3 Bedienungsanleitung

Vitek

Vitek VTD-VS48 Bedienungsanleitung

Vitek

Vitek VTC-AR2B4FN Bedienungsanleitung

Vitek

Vitek VTC-C770DN/IP2 Bedienungsanleitung

Vitek

Vitek VT-PTZ36 Bedienungsanleitung

Vitek

Vitek INDOOR MIGHTY DOME - Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Lumens

Lumens VC-A50PNW Bedienungsanleitung

Security Cameras Direct

Security Cameras Direct CFC6042IR Bedienungsanleitung