Vivo STAND-E-102B Bedienungsanleitung

Black Electric Single Motor Desk Frame

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-e-102b

SKU: STAND-E-102B

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

If you do not understand these directions, or if you have any doubts about the safety of the installation,

please call a qualified technician. Check carefully to make sure there are no missing or defective parts.

Improper installation may cause damage or serious injury. Do not use this product for any purpose that is

not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage

or injury caused by improper mounting, incorrect assembly, or inappropriate use.

WARNING!

PACKAGE CONTENTS

A (x1)

Telescopic

Crossbar

B x1)

Sync Rod

C(x1)

Cable Management

Tray

D(x2)

Foot

E(x2)

Side Bracket

F(x1)

AC Adapter

G (x2)

Hook

H x1)

Motorized Leg

I(x1)

Leg

J(x1)

Power Cable

K(x1)

Control

Panel

ELECTRICAL SAFETY INSTRUCTIONS

THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC

SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.

• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.

• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.

• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR

SELLER TO REPLACE DAMAGED PARTS.

• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE

MADE CONTACT WITH LIQUIDS.

• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.

• OUTDOOR USE IS PROHIBITED.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

L(x3)

Cable Clip

M (x8)

Rubber Pad

N x3)

So Pad

S-B x10)

ST4.2x20mm

Screw

S-C (x2)

ST3.5x18mm

Screw

S-D (x4)

M4x6mm

Screw

S-A (x16)

M6x12mm

Screw

T-A x1)

4mm Allen

Wrench

O (x1)

Splitter Cable

110 lbs

(50kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1

Loosen the two set screws on the Telescopic Crossbar (A) using the 4mm Allen Wrench (T-A). Adjust

the crossbar length to suit the desktop. Re-tighten all screws. NOTE: Make sure adjusted length of the

Telescopic Crossbar is no more than 61" (155cm).

TOOLS NEEDED

Phillips

Screwdriver

STEP 2

Attach the Telescopic Crossbar to the Legs (H, I) as shown using M6x12mm Screws (S-A), and tighten

with the 4mm Allen Wrench (T-A).

Drill

NOTE: Insert all necessary screws into holes

before tightening.

T-A

S-A

Including monitors, the weight capacity is 154 lbs (70kg).

STEP 3

STEP 4

STEP 5

If you are using a VIVO desktop please follow the

manual that came with it. Otherwise, place frame

upside down on desktop and drill pilot holes for

screws. Use a 3/32” (3mm) bit, and drill holes to a

depth of 3/8” (10mm).

Place the Feet (D) on the legs as shown. Insert and tighten

M6x12mm Screws (S-A) using the 4mm Allen Wrench (T-A).

Attach the Side Brackets (E) to both ends of the frame using four M6x12mm Screws (S-A). Tighten with

the 4mm Allen Wrench (T-A).

T-A

S-A

Drill

STEP 6

STEP 7

Attach Hooks (G) to Cable Management Tray (C) using M4x6mm Screws

(S-D) with a Phillips Screwdriver. Hang the tray onto the telescopic

crossbar and tighten knobs to secure.

Position the frame upright. Loosen the knobs on the Sync Rod (B) and extend the hex sha. Insert hex

sha into the Leg (I), making sure the metal retaining ring makes contact with the leg. While holding the

hex sha with one hand, extend sync rod onto the spline sha of the motorized leg. Re-tighten knob.

CAUTION: To avoid injury, at least two people should

turn the frame upright.

OPTIONAL: Remove paper backing from So Pads (N)

and stick them to the inside and top of Hooks (G).

S-D

Knob

STEP 8

STEP 9

Connect Motorized Leg (H) to the Control Panel (K1). Connect Splitter Cable (O2) to Control Panel (K2).

Connect Splitter Cable (O1) to AC Adapter (F).Connect the Power Cable (J) to the AC Adapter (F).

Remove the protective film from the adhesive Rubber Pads (M). Position the rubber pads on the side

brackets and telescopic crossbar as shown.

K1K2

DC plug

USB - Used in manual #2

Used in manual #2

STEP 11

STEP 12

Attach the control panel to the underside of the desktop using ST3.5x18mm Screws (S-C) as shown.

Once control panel is installed, Cable Clips (L) can be attached to the desk for cable management.

Refer to Control Panel User Guide for operational instructions.

If necessary, adjust foot pads to level desk.

Failure to follow these instructions may result in property damage and/or personal injury.

S-C

Drill

STEP 10

If you are using a VIVO desktop, Refer to the manual that came with your desktop.

If you are not using a VIVO desktop, place the desktop on the frame, and secure the desktop using the

ST4.2X20mm Screws (S-B). Make sure your desktop is greater than 1" (25mm) thick using screws (S-B).

S-B

LAST UPDATED: 1/19/2022

REV1

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Andere Handbücher für STAND-E-102B

Inhaltsverzeichnis

Andere Vivo Rack & Stand Handbücher

Vivo

Vivo STAND-V103W Bedienungsanleitung

Vivo

Vivo STAND-V104A Bedienungsanleitung

Vivo

Vivo STAND-TV07-S Bedienungsanleitung

Vivo

Vivo MOUNT-VP08B Bedienungsanleitung

Vivo

Vivo STAND-V002JB Bedienungsanleitung

Vivo

Vivo MOUNT-POLE05A Bedienungsanleitung

Vivo

Vivo STAND-V155C Bedienungsanleitung

Vivo

Vivo STAND-RACE1A Bedienungsanleitung

Vivo

Vivo STAND-V002CW Bedienungsanleitung

Vivo

Vivo MOUNT-PC04A Bedienungsanleitung

Vivo

Vivo STAND-V002OU Bedienungsanleitung

Vivo

Vivo STAND-V001 Bedienungsanleitung

Vivo

Vivo STAND-V003FG Bedienungsanleitung

Vivo

Vivo STAND-V101GTU Bedienungsanleitung

Vivo

Vivo STAND-V200T Bedienungsanleitung

Vivo

Vivo MOUNT-CUB2D Bedienungsanleitung

Vivo

Vivo PT-SD-AM01K Bedienungsanleitung

Vivo

Vivo DESK-V000VL Bedienungsanleitung

Vivo

Vivo STAND-V102G2D Bedienungsanleitung

Vivo

Vivo STAND-V000P Bedienungsanleitung

Vivo

Vivo STAND-V001HG Bedienungsanleitung

Vivo

Vivo MOUNT-KB05T Bedienungsanleitung

Vivo

Vivo STAND-TV01B Bedienungsanleitung

Vivo

Vivo DESK-V101EC Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung