VXA7240C
INSTALLATION GUIDE
PAGE 1 of 2
BEFORE BEGINNING YOUR INSTALLATION
Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
240 PSI Single Needle Air Pressure Gauge (White Face/Chrome Bezel)
SAFETY INSTRUCTIONS
Do not apply shock to the product such as by dropping, doing so will affect its precision.
For better results, install the air gauge perpendicular to the ground with the zero point on the dial at the bottom.
Apply sealant to fitting's threads before assembly. DO NOT OVER TIGHTEN.
Ensure that your air system has no pressure before starting the installation.
MOUNTING
In one of the Air Tank’s 1/4" NPT ports, using the thread sealant provided, install the air pressure gauge.
The side or top of the tank is the best location to use as to prevent condensation from entering into the
gauge.
Dropping or disturbing the product can affect the product’s accuracy.
For best results, the air gauge should be installed perpendicular to the ground, with the zero facing the
bottom.
To tighten the pressure gauge into the air tank, place a wrench over the square wrench flats to tum the
gauge. This is the proper way to avoid air leakage or damage.
