VOGELS PFW 6875 Bedienungsanleitung

PFW 6875

www.vogels.com | Europe +31 (0)40 26 47 400

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

Included Components

Required for installation

PFW 6875 Maximum Flat Panel Weight:

160 lb. / 72.57 kg.

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

5/16” x 3” (76mm) Lag Bolts

(Qty 4)

Thread Depth Indicator

(Qty 1)

Universal Spacers

(Qty 8)

5/16” (7.93 mm) Concrete

Wedge Anchors

(Qty 4)

5/16” Flat Washers

(Qty 4)

Universal Washers

(Qty 4)

Pencil Protective Eyewear

Electronic Stud Finder M6 or 1/4” Drill Bit M8 or 5/16” Concrete Drill Bit

Portable Drill

Phillips Head Screwdriver Socket Wrench

13mm or 1/2” Socket10mm Socket

Level

M5 Allen Driver

(Qty 1)

M4 x 12mm (Qty 4)

M4 x 16mm (Qty 4)

M4 x 25mm (Qty 4)

M6 x 12mm (Qty 4)

M6 x 16mm (Qty 4)

M6 x 25mm (Qty 4)

M8 x 12mm (Qty 4)

M8 x 16mm (Qty 4)

M8 x 25mm (Qty 4)

Wall Mount

(Qty 1)

Extension Brackets

(Qty 2)

Bracket

(Qty 1 Pair)

M8 Washers

(Qty 4)

M8 Nylon Nut

(Qty 4)

Page 2

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

1) Use a stud nder to determine the wall studs in the

vicinity of the mount.

2) Use a pencil to mark each of the wall studs.

Wood Stud Installation

Use a pencil to mark the upper right mounting location of the wall

stud.

Drill a “pilot hole” using a M6 or 1/4” drill bit on the stud that was

marked on the upper right.

1) Place the mount against the wall and align it with the pilot hole.

2) Insert one (1) 5/16” x 3” (76 mm) lag bolt one (1) 5/16” washer

into the upper right pilot hole.

3) Use a socket wrench and a 13mm or 1/2” socket to tighten the

lag bolt.

Page 3

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

1) Level the mount

2) Use a pencil to mark the remaining three (3) mounting locations

1) Insert one (1) 5/16” x 3” (76 mm) lag bolt and one (1) 5/16” washer

into each pilot hole.

2) Tighten all lag bolts using a socket wrench and 13mm or 1/2” socket.

Do not over tighten the lag bolts

Drill a “pilot hole” in each of the three (3) marks with a power drill and

a M6 or 1/4” drill bit.

Page 4

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

Two people recommended for this step; one person to level the

mount and another person to mark the mounting locations.

Drill a “pilot hole” in each of the four (4) mark areas with a M8 or

5/16” concrete drill bit.

1) Place the mount against the wall over the threaded shafts of the

concrete wedge anchors.

2) Attach the nuts and washers you remove and add (1) 5/16”

washers on each threaded shafts.

3) Tighten using a socket wrench and a 10mm socket.

Do not over tighten the concrete wedge anchor

1) Insert the concrete wedge anchors into each hole. Lightly tap

each concrete wedge anchors into place with a hammer.

2) Remove the nuts and washers from the concrete wedge anchors.

Concrete Wall Installation

5/16” Washer

Page 5

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

PFW 6875 dedicated at-panel spacers are engineered with the knowledge

that aligning each at-panel on a large wall is time consuming and costly.

These model-specic spacers are available for most at-panels, which

signicantly reduces the installation time. (Call Customer Service to inquire

about model specic spacers.)

Installing OPTIONAL Model Specic Spacers

This spacer is shown for illustration purposes only. Your spacer may

look different depending on the display model you are installing.

1) Once your PFW 6875 is mounted in the desired location and

is level, align your spacer to the top left or right (depending on

your install direction) corner register tabs of your mount.

You may use commercially available hardware to secure the

spacer to the wall during installation (depending on the wall material).

You may utilize the same spacer for multiple PFW 6875 installations.

Start

Multiple PFW 6875 mounts can be installed using model specic spacers. Simply

repeat step one when installing each of the surrounding PFW 6875 mounts. Use

one spacer for each 2x2 installation by mounting it to the wall, or utilize the same

spacer as many times needed to complete an unlimited PFW 6875 large matrix

video wall.

1. Make sure the spacer is plumb and level and mark each corner where the

PFW 6875 will be mounted (or secure to the wall). It is best to start from the

bottom corner and work your way up.

2. Install the second mount working in a horizontal direction.

3. Ensure that the mount remains plumb and level.

4. Repeat this step for each mount horizontally

5. To install multiple rows, place spacer between previously installed

PFW 6875’s on the bottom row. Make sure the spacer is plumb and level,

mark the corners (or secure to the wall) to be sure of where the PFW 6875

should be and secure your mount to the wall.

Page 6

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

1) Insert a small straw or toothpick into the threaded inserts found on the back

of the at-panel.

2) Use a pencil to mark the depth of the threaded insert on the small straw or

toothpick.

3) Mark the straw or toothpick 1/8” (3.175 mm) above the depth of the threaded

insert, as shown in Figure 1.

4) Insert the small straw or toothpick into the remaining threaded inserts to

compare and verify their depth using the straw or toothpick’s 1/8” (3.175 mm)

allowance mark.

5) Locate the correct diameter screw for the threaded insert.

If the screw you selected is longer than the 1/8” (3.175 mm) allowance

mark on the small straw or toothpick, as shown in Figure 2 and Figure 3,

do not use this screw. The screw length must not bypass the mark.

6) Test each size of the screws provided.

The correct screws should thread easily into themounting point and not pull

out when tension is applied.

Small Straw or Toothpick

Marking the 1/8”

Allowance

Small Straw

or Toothpick

Small Straw

or Toothpick Depth Plus 1/8” Allowance

Mark

Depth Plus 1/8” Allowance

Mark

Selecting the Mounting Hardware

Securing the Adapters

Optional adapters are available with your PFW 6875 mount.

Secure the adapters to the PFW 6875 brackets with the

supplied M8 washers and Nuts.

M8 Nylon nut

M8 Washer

Page 7

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

Universal Washer Installation

Universal Spacer Installation

Flat Panel

Universal Washer

Universal Spacer

Mounting Bracket

Mount Point

Mounting Screw

1˝ ¼˝

The Universal Spacers

Fit M4, M5, M6 and M8 screw sizes.

Universal Washers are designed to accommodate the various M4, M5, M6 and

M8 hole sizes required by at-panels.

Do not place excessive pressure on the back of the at-panel, as this

may damage your at-panel.

The Universal Washer must be installed between the head of the

mounting screw and the mounting bracket as shown.

Does your at-panel have:

●Recessed mount points?

●Uneven mount points?

●A curved back?

●Any obstruction near the mount point?

If Yes, you must install Universal Spacers. Remove the mounting brackets,

Universal Washers, and mounting screws from the back of the at-panel.

Proceed to the “Universal Spacer Installation” section.

If No, skip to the “Attaching the Mounting Bracket to the Flat-Panel”

section.

M5, M6

25.4 mm 6.35 mm

Page 8

Universal Spacers allow you to attach the mounting bracket to at-panels which

have recessed or uneven mount points. Each Universal Spacer adds 1/4” (6.35 mm)

to the distance between the mounting bracket and your at-panel.

The Universal Spacers must be stacked and oriented as shown.

The Universal Spacers must only be installed between the mounting bracket

and your at-panel.

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

Attaching the Mount Bracket to the Flat-Panel

Mounting bracket adjustments are factory pre-set (see Note).

This section requires two people.

Do not release your at-panel until you are certain that top and

bottom hooks of both mounting brackets are securely seated

on the upper and lower mounting rails of the wall panel.

1) Raise the at-panel past the top and bottom mounting rails on the

wall panel.

2) Slide the at-panel down slowly, keeping it close to the wall.

3) Engage the top and bottom mounting brackets to the rails of the

mount.

Note: These registers must

align prior to installation.

They are factory set.

Check to determine proper

alignment

Attaching the Flat-Panel to the Mount

Page 9

1) Place your at-panel screen-side down on a soft, at surface.

2) Identify the number and location of the thread inserts on the back of your

at-panel.

3) Aligning the holes on each mounting bracket with the thread inserts on the

back of your at-panel.

4) Secure each mounting bracket to your at-panel by inserting a minimum of

two (2) screws per bracket.

Do not overtighten the mounting hardware.

PFW 6875

Installation Guide

Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d’Installation, Installatie gids

www.vogels.com | Europe +31 (0)40 26 47 400

Move Inward

Left Control Right Control

Move Outward

Left Control Right Control

The locking safety screws keep the at-panel from being

accidently dislodged from the PFW 6875.

1) Locate the pre-installed security locking safety screw at the bottom

of each of the mounting brackets.

2) Use the M5 Allen driver (supplied) to tighten the locking safety

screw.

Locking Safety Screw Installation

Do not overtighten the locking safety screws.

Note: Tighten screw to surface, then tighten 1/4” (6.35 mm) turn

Pre-installed

Locking Safety Screw

( 1 per Bracket )

Page 10

Andere Handbücher für PFW 6875

Inhaltsverzeichnis

Andere VOGELS Rack & Stand Handbücher

VOGELS

VOGELS PFW6855 Bedienungsanleitung

VOGELS

VOGELS NEXT 7346 Bedienungsanleitung

VOGELS

VOGELS RISE 5105 Bedienungsanleitung

VOGELS

VOGELS EFW 8405 Bedienungsanleitung

VOGELS

VOGELS EFW 8245 Bedienungsanleitung

VOGELS

VOGELS TVM 3840 Series Bedienungsanleitung

VOGELS

VOGELS MOMO Motion+ Bedienungsanleitung

VOGELS

VOGELS EMC 5000 - MOUNTING Bedienungsanleitung

VOGELS

VOGELS EFW 6105 Bedienungsanleitung

VOGELS

VOGELS THIN 415 Bedienungsanleitung

VOGELS

VOGELS UNIVERSAL Series Bedienungsanleitung

VOGELS

VOGELS EFW 6405 - EFW 6445 Bedienungsanleitung

VOGELS

VOGELS W5305 Series Bedienungsanleitung

VOGELS

VOGELS THIN 345 Bedienungsanleitung

VOGELS

VOGELS EFWE 6455 RC - MOUNTING Bedienungsanleitung

VOGELS

VOGELS WALL 1325 Bedienungsanleitung

VOGELS

VOGELS VFW 465 Bedienungsanleitung

VOGELS

VOGELS THIN 515 Bedienungsanleitung

VOGELS

VOGELS VFW 465 - MOUNTING Bedienungsanleitung

VOGELS

VOGELS TVB 2375 Bedienungsanleitung

VOGELS

VOGELS VFWE 552 RC Bedienungsanleitung

VOGELS

VOGELS WALL 3105 Bedienungsanleitung

VOGELS

VOGELS TMM 106 RingO Bedienungsanleitung

VOGELS

VOGELS TVM 5405 Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung